A single - phase transformer rated 60 KVA in connected to 400/235 VA 5HZ supply, has an efficiency of us at fuit load If the terminal voltage on full load is 200 V. Determine the voltage regulation and output frequency Voltage Regulation Frequency

A single - phase transformer rated 60 KVA in connected to 400/235 VA 5HZ supply, has an efficiency of us at fuit load If the terminal voltage on full load is 200 V. Determine the voltage regulation and output frequency Voltage Regulation Frequency

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter3: Power Transformers

Section: Chapter Questions

Problem 3.35P: Consider a bank of this single-phase two-winding transformers whose high-voltage terminals are...

See similar textbooks

Related questions

Q: A load of 1400 KVA at 0.866 pf lagging is supplied by a 3-phase transformer of 1,000 KVA and 500 KVA…

Q: A 10 kVA, 2400/240 V, 60 Hz single phase transformer has Z, = 5.2 + j12.5 ohms and Z2 = 0.06 + j0.12…

A: In this question, We need to calculate the load voltage if Primary voltage and frequency is rated.…

Q: If the open circuit voltage is 239V and the full load voltage is 205V, then the percentage…

A: Voltage Regulation is nothing but ratio of drop in voltage from no load to full load to full load…

Q: Determine the rated primary and secondary currents of a 20-kVA 1200/120-V single-phase transformer.…

A: Electrical machines can be either generator , transformers or motors. They can be either Ac machines…

Q: A 250 MVA, 11/400 kV 3-phase power transformer has a leakage reactance of 0.05 pu on the base of 250…

A: Given values are - Rating=250MVAVLVH=11400Xpu=0.05

Q: A 400-kVA transformer has a primary winding resistance of 192 and a secondary winding resistance of…

A: Transformer is a static electrical device which transfers power from one circuit to another circuit…

Q: A transformer has 595 primary turns connected to a 1.5 kV / 205 V supply, then the number of…

A: Primary turns = 595 voltage ratio = 1500 V205 V For transformers:…

Q: A 20-ohm resistance is connected across the secondary winding of a single-phase power transformer…

A: Given:-Secondary voltage,V2=150vResistance is connected across secondary winding,∴R2=20ΩSupply…

Q: b) A single-phase transformer with 10: 1 turns-ratio and rated at 50 kVA, 2400-V/240-V, 50-Hz is…

A: (b): Given in the question: Turns ratio: N1N2=101 Voltage on the primary side is: V1 = 2400V Voltage…

Q: The single-phase transformer in the following figure has a load voltage Zl of 120 Vrms. If the load…

Q: 29: For the ide al transformer circuit shown, find th average power delivered to (1Q) resistor?…

Q: Compute the copper losses at full load if a 500KVA transformer has 90% efficiency at both half-load…

Q: The single-phase transformer in the following figure has a voltage on the Zl load of 120 Vrms. If…

Q: Q2: a) Determine the efficiency of three-phase 400 kVA, 11kV/ 380 V transformer at over-loading…

A: The efficiency of a three-phase transformer is determined as shown below

Q: 10 A three-phase transformer is given. The number of turns of the high voltage winding is N1=850 and…

A: In this question we need to find a type of winding connected in LV side.

Q: If the open circuit voltage is 225V and the full load voltage is 214V, then the percentage…

A: Percentage regulation is given by R R = (VOC - VFL ) / VFL VOC = Open circuit voltage VFL =…

Q: . A single-phase transformer is rated at 3 kVA, with 240Vac primary and 120 Vac secondary. The…

Q: A) A single-phase transformer with a ratio of 440/110-V takes a no-load current of 5A at 0.2 power…

A: In the single phase transformer. What is primary current Ip = Io + IS ' Where Is' is secondary…

Q: 5- A single-phase transformer, working at unity power factor has an efficiency of 90 % at both…

Q: A single-phase 100-kVA, 2,400/240 V, 60-Hz distribution transformer is used as a step-down…

A: As per the guidelines, the first 3 sub-parts have been solved. (a). The value of the turns ratio…

Q: (c) In a 25 KVA, 1000/400 V, 1- o transformer, the core loss and full load copper losses are 200 W…

A: Efficiency = (output power/input power )×100. Input power = output power + iron losses + copper…

Q: A single-phase transformer of rating 25 kVA, supplies a 12 kW load at power factor of 0.6 lagging.…

A: Referring to the given question, the load supplied is given as 12kW at 0.6 power factor lagging.…

Q: Design a 150 VA, 24OV/48V-12V single phase transformer core by using following lamination.…

A: Given, Rating of single phase transformer is 150 VA 240V48V-12V Cross sectional area…

Q: In a 1-phase transformer of 20 KVA, 2000/200 volts, the iron and copper losses are 400 W and 500 W…

Q: 1. A 40-MVA, 20/400 kV, single-phase transformer has the following series impedances: ZLV = 0.9 +…

A: Introduction: An equivalent Transformer Circuit is an explanation of the transformer's behavior by…

Q: Find the value of line current and phase current of primary and secondary of a 100 kVA 2200/440 V, 3…

Q: Open-circuit test Short-circuit test Voc = 480 V Vsc = 10.0 V loc = 0.41 A Isc = 10.6 A %3D Poc = 38…

A: Hello. Since your question has multiple sub-parts, we will solve the first three sub-parts for you.…

Q: Determine the characteristic impedance for a quarter-wave transformer that is used to match a…

Q: The transformer shown operates at 50Hz with the turn numbers N1=200 and N2=100 for primary and…

Q: For the 11000/400V, AY 3-ph transformer, if the line current in the secondary is 500A calculate the…

Q: A 600 kVA, 1-ph transformer has an efficiency of 92 % both at full- oad and half-load at unity power…

Q: Determine the efficiency of three-phase 400 kVA, 11kV/ 380 V transformer at over-loading condition…

Q: 1. A 11000/230V, 150KVA, 50 Hz single phase transformer has core loss of 1.4kW and full load copper…

Q: Given three phase fullwave with center tapped transformer with 220 Vac source voltage, determine:…

A: Since you have posted a question with multiple sub-parts, we will solve the first three subparts for…

Q: A two-winding transformer rated at 100 kVA, is connected as an autotransformer to provide 10kV from…

A: We are authorized to answer one question at a time, since you have not mentioned which question you…

Q: A 150-kVA simple-phase transformer has a core loss of a 1.5kW and a full-load Cu loss of 2 kW.…

A: In this question we need to find a efficiency of the transformer at the given condition.

Q: A single-phase transformer, working at unity power factor has an efficiency of 90 % at both…

Q: 02/A/ What are the conditions for satisfying parallel operation of single phase transformer? Deduce…

A: “Since you have asked multiple questions, we will solve the first question for you. If you want any…

Q: A 200 – kVA transformer with impedance of 5 percent and the power factor of the load is 85 percent.…

A: Given, A transformer with KVA rating, S=200 kVA Impedance, Z=5% Power factor, cosϕ=85%=0.85 Primary…

Q: . A 15kVA single-phase transformer, for 10000V/440V at no load, has resistances and leakage…

A: In this question, We need to determine the value of the secondary voltage at full load, 0.85 power…

Q: A single-phase ideal transformer is rated at 2KVA, 240V/120V. The transformer is supplying rated…

A: A single phase transformer has, Apparent power (S) = 2 kVA Voltage ratio is 240/120 V. Load…

Q: Determine the efficiency of a 150 kVA transformer at 50% of full load and 0.8 power factor lagging…

Q: A transformer has a reactive drop of 6% and a resistive drop of 2.5%. Determine the lagging power…

A: The voltage regulation is given by the expression as shown below: In terms of the values of the…

Q: A single-phase transformer, working at unity power factor has an efficiency of 90 % at both half-…

Q: A single-phase transformer rated 65 KVA is connected to 400/235 V,50HZ supply, has an efficiency of…

A: The solution can be achieved as follows.

Q: 6. A 300 kVA, single-phase transformer is designed to have a resistance of 1-5 % and maximum…

A: In this question we need to find a efficiency of transformer at given loading conditions.

Q: 302 j722 םרהj 302 The label values of the single-phase transformer whose electrical equivalent…

A: Given: A 20 KVA, 15400 V/240 V, 50 Hz, single-phase transformer has the following equivalent…

Concept explainers

Single Phase Transformer

A single-phase transformer is a type of power transformer. It is an electrical device that accepts converts the single phase alternating power into single phase alternating power. In this power conversion the voltage is stepped up or down. If the voltage is stepped up, the current will be stepped down and if the voltage is stepped down, the current will be stepped up.

Question

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, electrical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A single-phase 100-kVA,2400/240-volt,60-Hz distribution transformer is used as a step-down transformer. The load, which is connected to the 240-volt secondary winding, absorbs 60 kVA at 0.8 power factor lagging and is at 230 volts. Assuming an ideal transformer, calculate the following: (a) primary voltage, (b) load impedance, (c) load impedance referred to the primary, and (d) the real and reactive power supplied to the primary winding.
A 23/230-kV step-up transformer feeds a three-phase transmission line, which in turn supplies a 150-MVA,0.8 lagging power factor load through a step-down 230/23-kV transformer. The impedance of the line and transformers at 230kVis18+j60. Determine the tap setting for each transformer to maintain the voltage at the load at 23 kV.
A two-winding single-phase transformer rated 60kVA,240/1200V,60Hz, has an efficiency of 0.96 when operated at rated load, 0.8 power factor lagging. This transformer is to be utilized as a 1440/1200-V step-down autotransformer in a power distribution system. (a) Find the permissible kVA rating of the autotransformer if the winding currents and voltages are not to exceed the ratings as a two-winding transformer. Assume an ideal transformer. (b) Determine the efficiency of the autotransformer with the kVA loading of part (a) and 0.8 power factor leading.
Consider an ideal transformer with N1=3000andN2=1000 turns. Let winding 1 be connected to a source whose voltage is e1(t)=100(1| t |)volts for 1t1ande1(t)=0 for | t |1 second. A2- farad capacitor is connected across winding 2. Sketch e1(t),e2(t),i1(t),andi2(t) versus time t.
An ideal transformer has no real or reactive power loss. (a) True (b) False
A single-phase 50-kVA,2400/240-volt,60-Hz distribution transformer is used as a step-down transformer at the load end of a 2400-volt feeder whose series impedance is (1.0+j2.0) ohm. The equivalent series impedance of the transformer is (1.0+j2.5) ohms referred to the high-voltage (primary) side. The transformer is delivering rated load at a 0.8 power factor lagging and at a rated secondary voltage. Neglecting the transformer exciting current, determine (a) the voltage at the transformer primary terminals, (b) the voltage at the sending end of the feeder, and (c) the real and reactive power delivered to the sending end of the feeder.
Consider a source of voltage v(t)=102sin(2t)V, with an internal resistance of 1800. A transformer that can be considered as ideal is used to couple a 50 resistive load to the source. (a) Determine the transformer primary-to-secondary turns ratio required to ensure maxi mum power transfer by matching the load and source resistances. (b) Find the average power delivered to the load, assenting maximum power transfer.
A single-phase, 50-kVA,2400/240-V,60-Hz distribution transformer has the following parameters: Resistance of the 2400-V winding: R1=0.75 Resistance of the 240-V winding: R2=0.0075 Leakage reactance of the 2400-V winding: X1=1.0 Leakage reactance of the 240-V winding: X2=0.01 Exciting admittance on the 240-V side =0.003j0.02S (a) Draw the equivalent circuit referred to the high-voltage side of the transformer. (b) Draw the equivalent circuit referred to the low-voltage side of the transformer. Show the numerical values of impedances on the equivalent circuits.
The transformer of Problem 3.16 is supplying a rated load of 50 kVA at a rated secondary voltage of 240 V and at 0.8 posr factor lagging. Neglect the transformer exciting current. (a) Determine the input terminal voltage of the transformer on the high-voltage side. (b) Sketch the corresponding phasor diagram. (c) If the transformer is used as a step-down transformer at the load end of a feeder whose impedance is 0.5+j2.0, find the voltage VS and the power factor at the sending end of the feeder.
An infinite bus, which is a constant voltage source, is connected to the primary of the three-winding transformer of Problem 3.53. A 7.5-MVA,13.2-kV synchronous motor with a sub transient reactance of 0.2 per unit is connected to the transformer secondary. A5-MW,2.3-kV three-phase resistive load is connected to the tertiary Choosing a base of 66 kV and 15 MVA in the primary, draw the impedance diagram of the system showing per-unit impedances. Neglect transformer exciting current, phase shifts, and all resistances except the resistive load.
(a) An ideal single-phase two-winding transformer with turns ratio at=N1/N2 is connected with a series impedance Z2 across winding 2. If one wants to replace Z2, with a series impedance Z1 across winding 1 and keep the terminal behavior of the two circuits to be identical, find Z1 in terms of Z2. (b) Would the above result be true if instead of a series impedance there is a shunt impedance? (c) Can one refer a ladder network on the secondary (2) side to the primary (1) side simply by multiplying every impedance byat2 ?
The ratings of a three-phase three-winding transformer are Primary(1): Y connected 66kV,15MVA Secondary (2): Y connected, 13.2kV,10MVA Tertiary (3): A connected, 2.3kV,5MVA Neglecting winding resistances and exciting current, the per-unit leakage reactances are X12=0.08 on a 15-MVA,66-kV base X13=0.10 on a 15-MVA,66-kV base X23=0.09 on a 10-MVA,13.2-kV base (a) Determine the per-unit reactances X1,X2,X3 of the equivalent circuit on a 15-MVA,66-kV base at the primary terminals. (b) Purely resistive loads of 7.5 MW at 13.2 kV and 5 MW at 2.3kV are connected to the secondary and tertiary sides of the transformer, respectively. Draw the per- unit impedance diagram, showing the per-unit impedances on a 15-MVA,66-kV base at the primary terminals.