A single stage, single acting reciprocating compressor has a bore of 250 mm and a stroke of 550 mm. It runs at a speed of 300 rev/min. The clearance is 4% of swept volume, and the polytropic index is 1.39 throughout. The intake pressure is 97 kPa at 25°C, and the final compression pressure is 600 kPa. If the free air conditions are 101 kPa and 20°C.
Q: Albert bought a portable device to pump his truck tyres. On the manual, he found out that the device…
A:
Q: A high-pressure air reservoir is connected to the inlet of a convergent-divergent nozzle with an…
A: Nozzle: It is the device which having varying cross section area. The function of nozzle is to…
Q: 8.6 A single sided centrifugal compressor is to deliver 14 kg of air per second when operating at a…
A:
Q: PROBLEM 5. An adiabatic expansion of air occurs through a nozzle from 828 KPa and 71°C to 138 KPa.…
A:
Q: PROBLEM 5. An adiabatic expansion of air occurs through a nozzle from 828 KPa and 71°C to 138 KPa.…
A: As per given question Temperature =71°c Inlet pressure =828kpa Exit pressure =138kpa We have to…
Q: A single-sided centrifugal compressor designed with no pre-whirl has the following dimensions and…
A:
Q: Steam issues from the nozzle of a single-impulse turbine at 800 m/sec on to blades moving at 300…
A: Given data as per question velocity of steam =800 m/s Velocity of blade =300 m/s Considering the…
Q: In a diesel 2-stroke, determine the short-circuiting of this 2500cc engine that has a stroke of 120…
A:
Q: conditions are 101.3 kPa and 15°C. The clearance volume is 6% of the stroke volume and the…
A:
Q: 5.1 kg/s of air enters the impeller of a centrifugal compressor at a stagnation pressure of 101.3…
A:
Q: Albert bought a portable device to pump his truck tyres. On the manual, he found out that the device…
A:
Q: Albert bought a portable device to pump his truck tyres. On the manual, he found out that the device…
A:
Q: A single-stage, single-acting air compressor with runs at 600 r/min. It has a polytropic index of…
A: Given data as per question volume flow rate =0.72 m3/min Final pressure =660 kpa clearance volume…
Q: A single stage, single acting air compressor running at 1500 rpm delivers air at 28 bar. For this…
A:
Q: overall pressure ratio of 6/1. The compressor has a bore and stroke of 15 and 24 cm respectively. If…
A: Mechanical efficiency is a ratio of the brake power and indicated power. This shows the…
Q: A single acting reciprocating compressor runs at 360 rev/min and takes in air at SSL conditions and…
A: Norte: According to Bartleby's guidelines first three subparts are solved. please upload other parts…
Q: PROBLEM 5. An adiabatic expansion of air occurs through a nozzle from 828 KPa 71°C to 138 KPa. The…
A: Given:P1=828 KPaT1=71°C =344 KP2=138 KPa
Q: A francis turbine is having a inlet diameter of 2.0 m and an outlet diameter of 1.2 m. The breath of…
A: Inlet diameter di=2 m ,Outlet diameter d0=1.2 mb=.2 m N=250 rpmQ=8 m3/sec.
Q: A single – stage air compressor has a cylinder bore of 0.1m, a stroke of 0.075m and a clearance…
A: Hello. Since your question has multiple sub-parts, we will solve first three sub-parts for you. If…
Q: What is a draft tube, and what is its purpose? Describe what would happen if turbomachinery…
A: Answer : Draft Tube : It is a tube in which the area increases gradually and is connected from the…
Q: contrifugal compressor running at 18000 rpm takes in air at 25°C and compresses it through a…
A:
Q: A 3-liter 6-cylinders square engine (bore = stroke) with two intake valves and one exhaust valve per…
A: Given:V=3 L =3*10-3 m3P=300 KWbmep=18.5 barTi=55°Cflow coefficient,CD=0.35M=0.6average flow…
Q: A single-stage, single-acting air compressor with runs at speed 600 rpm. It has a polytropic index…
A:
Q: A 3-liter 6-cylinders square engine (bore = stroke) with two intake valves and one exhaust valve per…
A: Brake Power is the power used to reduce the speed or torque of a machine. This can be generally…
Q: A 4- stroke engine 4-cylinder, working on the Otto cycle has cylinder bore of 150 mm and stroke…
A: Given Data The bore of the cylinder is: d=150 mm=15 cm The length of the stroke is: L=200 mm=20 cm…
Q: At rated thrust, a liquid-fueled rocket motor consumes 80 kg/s of nitric acid as oxidizer and 32…
A: Given: mass flow rate of oxidizer = 80 kg/s mass flow rate of fuel = 32 kg/s atmospheric pressure =…
Q: - The model '6SE-TCA3 Perkins' diesel engine have a stroke of 190 mm and a bore of 160 mm. If its…
A:
Q: A centrifugal compressor has the following operating characteristics: mass flow rate=9 kg/sec Slip…
A:
Q: A single stage single acting air compressor with runs at speed 600 rpm. It has a polytropic index of…
A:
Q: A single stage, double acting air compressor delivers 15 m^3 of air per minute measured at 1.013 bar…
A: An air compressor is a machine which takes in atmospheric air, compresses it with the help of some…
Q: lbert bought a portable device to pump his truck tyres. On the manual, he found out that the device…
A:
Q: PROBLEM 1. An adiabatic expansion of air occurs through a nozzle from 828 KPa and 71°C to 138 KPa.…
A: To find: The specific volume, temperature and the speed at the exit section. Given: The initial…
Q: A single-stage, single-acting air compressor with runs at speed 600 rpm. It has a polytropic index…
A: The same has been solved in next step.
Q: A single-stage, single-acting air compressor with runs at 600 r/min. It has a polytropic index of…
A: Given:Volume flow rate, V˙=0.72 m3/min,Volume of air taken, V1=0.72600 m3N=600 r/minV1=0.0012…
Q: Problem 6.28 - A pilot tube gets to be inserted in a pipe having diameter of 300 mm. The static…
A:
Q: Albert bought a portable device to pump his truck tyres. On the manual, he found out that the device…
A:
Q: e) Calculate the rotor size, blade height, power and speed rating of the wind turbine. Aspect ratio…
A: Aspect ratio = h/R = 2 Capacity factor = 0.3 Tip speed ratio = 7 Mechanical losses = 0.1 generator…
Q: Calculate the rotor size, blade height, power and speed rating of the wind turbine. Aspect ratio =…
A: here given data h/R =2 Capacity factor C= 0.3 Tip speed ratio Tr = 7 Loss 7% and generator losses…
Q: A 3-liter 6-cylinders square engine (bore = stroke) with two intake valves and one exhaust valve per…
A: solution given below:
Q: A 3-liter 6-cylinders square engine (bore = stroke) with two intake valves and one exhaust valve per…
A:
Q: A single stage, double acting air compressor is required to deliver 14 m³ of air per min measured at…
A:
Q: 6. The first stage of an axial flow compressor is designed for free vortex conditions, with no inlet…
A: Given: N=13000 rpm∆Ts=18°Ck=0.6ηW=0.94η=0.91v=150 m/sp01=1 barT01=300 K
Q: A single-sided centrifugal compressor designed with no prewhirl has the following dimensions and…
A:
Q: PROBLEM 5. An adiabatic expansion of air occurs through a nozzle from 828 KPa and 71°C to 138 KPa.…
A: For solving this problem, we first calculated the value of temperature at final state/exit , and…
Q: A single-sided centrifugal compressor designed with no pre-whirl has the following dimensions and…
A: Given datam=20kg/sPressure ratio=3.8N=12000rpmT1=293KP1=1.03barσ=0.9
Q: A centrifugal compressor has the following operating characteristics: mass flow rate=9 kg/sec Slip…
A: we are supposed to answer only 3 sub parts..please post other parts as the other question.
Q: Learjet 35 is a multi-role business jet and a military transport aircraft equipped with tail-mounted…
A:
Q: A double acting single stage compressor runs at 363 RPM. Compressor suction is at 23°C and 100 kPa.…
A: Hello. Since your question has multiple sub-parts, we will solve first three sub-parts for you. If…
Step by step
Solved in 2 steps with 1 images
- A single acting, two stage, reciprocating compressor receives air at 100 KPa and air capacity of 0.05 m3/sec and delivered at 400 KPa. The clearance volume is taken to be 8 %. The compression and expansion process is isentropic with compressor mean piston speed of 150 meter/min. Assuming that each piston has the same amount of stroke. no pressure drops at the suction and discharge ports of the compressor and perfect intercooling, determine: a) The piston diameter in centimeters b) The total power required in Kilowatts c) The heat loss at the intercooler in KilowattsAlbert bought a portable device to pump his truck tyres. On the manual, he found out that the device is a single stage, single-acting air compressor. Air delivery for this device is 30 bar at a speed of 1500 rev/min. The atmospheric condition of his location is 87 kPa and 20 ˚C, with a FAD of 0.22 m2/min. The clearance volume is 4% of theswept volume and the stoke/bore ratio is 1.3/1.Take “n” as 1.3, cp = 1.005 kJ/kg K, cv = 0.718 kJ/kg K Based on pictures below 1 which formula number will be used to evaluate the delivery temperature? 2 which formula number will be used to evaluate the isothermal efficiency? 3 which formula number will be used to evaluate the power input to the compressor? 4 which formula number will be used to evaluate the bore and stroke?Albert bought a portable device to pump his truck tyres. On the manual, he found out that the device is a single stage, single-acting air compressor. Air delivery for thisdevice is 30 bar at a speed of 1500 rev/min. The atmospheric condition of his locationis 87 kPa and 20 ˚C, with a FAD of 0.22 m2/min. The clearance volume is 4% of the swept volume and the stoke/bore ratio is 1.3/1. Take “n” as 1.3, cp = 1.005 kJ/kg K, cv = 0.718 kJ/kg K 1.What is the delivery isothermal efficiency of the compressor percentages to 2 decimal places?
- Albert bought a portable device to pump his truck tyres. On the manual, he found outthat the device is a single stage, single-acting air compressor. Air delivery for this device is 30 bar at a speed of 1500 rev/min. The atmospheric condition of his location is 87 kPa and 20 ˚C, with a FAD of 0.22 m2/min. The clearance volume is 4% of theswept volume and the stoke/bore ratio is 1.3/1.Take “n” as 1.3, cp = 1.005 kJ/kg K, cv = 0.718 kJ/kg K Dont calculate just indicate formula 1 which formula number will be used to evaluate the induced volume in terms of the swept volume? 2 which formula number will be used to evaluate the mass flow rate of air? 3 which formula number will be used to evaluate the power input to the compressor?Albert bought a portable device to pump his truck tyres. On the manual, he found out that the device is a single stage, single-acting air compressor. Air delivery for this device is 30 bar at a speed of 1500 rev/min. The atmospheric condition of his location is 87 kPa and 20 ˚C, with a FAD of 0.22 m2/min. The clearance volume is 4% of the swept volume and the stoke/bore ratio is 1.3/1. Take “n” as 1.3, cp = 1.005 kJ/kg K, cv = 0.718 kJ/kg K 1.What is the delivery temperature of air in the compressor in Kelvin to 1 decimal places?Albert bought a portable device to pump his truck tyres. On the manual, he found out that the device is a single stage, single-acting air compressor. Air delivery for this device is 30 bar at a speed of 1500 rev/min. The atmospheric condition of his location is 87 kPa and 20 ˚C, with a FAD of 0.22 m2/min. The clearance volume is 4% of the swept volume and the stoke/bore ratio is 1.3/1. Take “n” as 1.3, cp = 1.005 kJ/kg K, cv = 0.718 kJ/kg K 1.What is the induced volume in terms of stroke volume, provide the coefficient values of the swept volume to 4 decimal places?
- Albert bought a portable device to pump his truck tyres. On the manual, he found out that the device is a single stage, single-acting air compressor. Air delivery for this device is 30 bar at a speed of 1500 rev/min. The atmospheric condition of his location is 87 kPa and 20 ˚C, with a FAD of 0.22 m2 /min. The clearance volume is 4% of the swept volume and the stoke/bore ratio is 1.3/1.Take “n” as 1.3, cp = 1.005 kJ/kg K, cv = 0.718 kJ/kg K Based on pictures below 1 which formula number will be used to evaluate the mass flow rate of air? 2 which formula number will be used to evaluate the delivery volume?Albert bought a portable device to pump his truck tyres. On the manual, he found out that the device is a single stage, single-acting air compressor. Air delivery for this device is 30 bar at a speed of 1500 rev/min. The atmospheric condition of his location is 87 kPa and 20 ˚C, with a FAD of 0.22 m2/min. The clearance volume is 4% of the swept volume and the stoke/bore ratio is 1.3/1. Take “n” as 1.3, cp = 1.005 kJ/kg K, cv = 0.718 kJ/kg K 1.Evaluate the mass flow rate of air inside the compressor in kg/min to 3 decimal places.Albert bought a portable device to pump his truck tyres. On the manual, he found out that the device is a single stage, single-acting air compressor. Air delivery for this device is 30 bar at a speed of 1500 rev/min. The atmospheric condition of his location is 87 kPa and 20 ˚C, with a FAD of 0.22 m2/min. The clearance volume is 4% of the swept volume and the stoke/bore ratio is 1.3/1. Take “n” as 1.3, cp = 1.005 kJ/kg K, cv = 0.718 kJ/kg K 1.Provide the answer values of the bore in mm to 2 decimal places.
- Albert bought a portable device to pump his truck tyres. On the manual, he found out that the device is a single stage, single-acting air compressor. Air delivery for this device is 30 bar at a speed of 1500 rev/min. The atmospheric condition of his location is 87 kPa and 20 ˚C, with a FAD of 0.22 m2/min. The clearance volume is 4% of the swept volume and the stoke/bore ratio is 1.3/1.Take “n” as 1.3, cp = 1.005 kJ/kg K, cv = 0.718 kJ/kg K 1 What is the swept volume in m3 to 6 decimal places? 2 Evaluate the mass flow rate of air inside the compressor in kg/min to 3 decimal places 3 What is the induced volume in terms of stroke volume, provide the coefficient values of the swept volume to 4 decimal places?Albert bought a portable device to pump his truck tyres. On the manual, he found out that the device is a single stage, single-acting air compressor. Air delivery for this device is 30 bar at a speed of 1500 rev/min. The atmospheric condition of his location is 87 kPa and 20 ˚C, with a FAD of 0.22 m2/min. The clearance volume is 4% of the swept volume and the stoke/bore ratio is 1.3/1. Take “n” as 1.3, cp = 1.005 kJ/kg K, cv = 0.718 kJ/kg K 1.What is the isothermal power of the compressor in kW to 2 decimal places in kW?Albert bought a portable device to pump his truck tyres. On the manual, he found out that the device is a single stage, single-acting air compressor. Air delivery for this device is 30 bar at a speed of 1500 rev/min. The atmospheric condition of his location is 87 kPa and 20 ˚C, with a FAD of 0.22 m2/min. The clearance volume is 4% of the swept volume and the stoke/bore ratio is 1.3/1. Take “n” as 1.3, cp = 1.005 kJ/kg K, cv = 0.718 kJ/kg K Determine the volumetric efficiency in percentage to one decimal place.