A small research company in Pittsburgh is working to develop a new method of mass storage to replace current storage technology. Four engineers and an office manager work there. The engineers are highly skilled professionals, and the office manager is a capable computer user. The company has a high-bandwidth Internet connection because employees must conduct research frequently. The employees have hopes of making a breakthrough and bringing the company public within the next two years. You have been hired as a security consultant to assess the company's needs. Write a paper recommending what type of security policy should be used (open, moderately restrictive, or highly restrictive) and what security technologies should be used. On what areas should the security policy focus (physical security, data security, auditing, passwords, and so forth), and what technologies should be used to secure these areas?

A small research company in Pittsburgh is working to develop a new method of mass storage to replace current storage technology. Four engineers and an office manager work there. The engineers are highly skilled professionals, and the office manager is a capable computer user. The company has a high-bandwidth Internet connection because employees must conduct research frequently. The employees have hopes of making a breakthrough and bringing the company public within the next two years. You have been hired as a security consultant to assess the company's needs. Write a paper recommending what type of security policy should be used (open, moderately restrictive, or highly restrictive) and what security technologies should be used. On what areas should the security policy focus (physical security, data security, auditing, passwords, and so forth), and what technologies should be used to secure these areas?

Systems Architecture

7th Edition

ISBN:9781305080195

Author:Stephen D. Burd

Publisher:Stephen D. Burd

Chapter12: Secondary Storage Management

Section: Chapter Questions

Problem 2RP

See similar textbooks

Similar questions

a. Assume there are one million books in your campus library. Approximate (to the nearest order of magnitude) how many bytes of data there are if all these books were stored online and accessible across a computer network. b. How long does it take to transfer the entire collection of books if the data rate of the transmission medium is 10 Mbps, the speed of the original Ethernet? How long does it take if we have a line with a speed of 1 Gbps? (This value represents the time needed to download your entire campus library.)
Question 1: How long would it take to send an 8 MB file over a 5,000 km copper wire that has a bandwidth of 10 Mbps? Question 2: The distance (by road) from Cal Poly Pomona to Cal Poly San Luis Obispo is 217.2 mi, or about 350 km. How long would it take to transfer a 4 KB file to SLO over a 10 Mbps link?
the question i am having trouble with is: you are designing an application at work that transmits data records to another building within the same city. The data records are 500 bytes in length, and your application will send one record every 0.5 seconds. is it more efficient to use a synchronous connection or an asynchronous connection? What speed transmission line is necessary to support either type of connection? juat looking for some insight on how to solve for the connection and also for the speed.
Imagine that you have trained your St. Bernard, Bernie, to carry a box of three 8-mmtapes instead of a flask of brandy. (When your disk fills up, you consider that anemergency.) These tapes each contain 7 gigabytes. The dog can travel to your side,wherever you may be, at 18 km/hour. For what range of distances does Bernie have ahigher data rate than a transmission line whose data rate (excluding overhead) is 150Mbps? How does your answer change if (i) Bernie’s speed is doubled; (ii) each tapecapacity is doubled; (iii) the data rate of the transmission line is doubled.
Dear Writer this is my calculation solution.could you please double check it and let me know it if it soccrect or should i proceed with your solution: Please provide justification if correction is need and correct answer.Thank you in advance. a) The transmission time of a frame can be calculated as follows: Propagation delay (Tp) = distance/speed = 5km / 200000 km/s = 0.0025ms Transmission time (Tt) = frame size/bandwidth = 10000 * 8bits / (1Mbps * 10 ^ 6) = 0.008sec = 8ms Total time for transmission = 2 * Tp + Tt(since the frame has to travel from A to D and then D to A) = 2 * 0.0025ms + 8ms = 0.005ms + 8ms = 8.005ms The transmission time of the frame from A to D is 8.005 ms. b) The efficiency of the CSMA/CD protocol is given by the formula: Tt is the transmission time of a frame C is the number of collisions, Tp is the propagation time of a signal from one end of the segment to the other. Efficiency = Tt / (C * 2 * Tp + Tt + Tp) Assuming that there are no other…
You are required, in your capacity as a network trainer for a big company, to provide an in-depth explanation of the following topics: a. Are you able to provide an explanation of the procedure that a switch goes through in order to construct its MAC address table? (this gets a rating of three stars) What takes place after a frame has been received by the switch and the MAC addresses of the destination that it is meant for have been discovered in the table?
please solution with explain When the developers make the program in an architecture such that it can be used by other customers in the future A. Customer-specific program B. Program files C. Program generator Q2: Maximum number of times Ethernet retransmits a packet A. 1 B. 16 C. 8 D. 15 Q3: Ethernet runs on? A. Pure ALOHA B. Slotted ALOHA C. CSMA D. CSMA/CD Q4: max signed decimal number represented in 6 bits 1s complement? A. -63 to +63 B. -31 to +32 C. -31 to +63 D. -31 to +31 Q17: Which one is Interior Gateway? A. ISIS B. OSPF C. RIP D. All of them Q18: Best running time complexity for binary search tree assuming it is already sorted? A. theta(1) B. theta(logn) C. theta(n) D. theta(2n) Q19: Which of the following is NOT in the Agile Manifesto? A. Contract negotiation over customer collaboration B. Working software over complete documentation C. Individuals and interactions over processes and tools D. Responding to change over following to plan
Dear Writer could oyu please kindly explin why i get this soltuion and it is different that your solution? The transmission time of a frame can be calculated as follows: Propagation delay (Tp) = distance/speed = 5km / 200000 km/s = 0.025ms Transmission time (Tt) = frame size/bandwidth = 10000 * 8bits / (1Mbps * 10 ^ 6) = 0.008sec = 8ms Total time for transmission = 2 * Tp + Tt(since the frame has to travel from A to D and then D to A) = 2 * 0.025ms + 8ms = 0.05ms + 8ms = 8.05ms The transmission time of the frame from A to D is 8.05 ms. b) To calculate the efficiency of the CSMA/CD protocol in this LAN, we can use the formula: Efficiency = (1 / (1 + 5tprop / tframe)) tprop is the propagation delay tframe is the time it takes to transmit a frame. To calculate tprop, we need to determine the time it takes for a signal to propagate through the 5 Km distance between Station A and Station D. The speed of propagation is 200,000 Km/sec The propagation delay is: tprop = distance /…
Example: Assume your Student ID is 432306128. Use the first four numbers for caculating: ? = 8 + 1 + 3 = 12, ? = (5 + 8 + 1 + 3) × 36 = 612, ? = 0.75?Question 1:Assume you want to transmit PAL video as a YUV signal. Each pixel is represented by ? bits. What is the bit rate required to transmit this video as:1. Composite Video. 2. SeparatedVideo. 3. Component Video.Question 2:A system with 32768 possible colors is used to transmit ? × ? pixel image.1. What is the color depth of this system?2. How much storage is required for one image?3. What is the system bit rate if one image takes 1.3169 sec for transmission?Question 3What is the entropy of your name (hegab + alharthi)?Question 4Using the results of Question 3, Encode the first three characters of your full name using Arithmetic code?
MAC protocols for an access network with N nodes continuously producing data at a constant rate of x bits per second per node are needed, and you are responsible for developing one. The traffic aggregated across nodes is also less than but close to the entire capacity of the access network, which is another positive development. In your opinion, which protocol is preferable: channel partitioning or random access? For this example, let us assume that you have chosen channel partitioning and that the channel has been divided into N subchannels.
Explain why the following statement is correct:A single-channel system has a wait time that is more than twice as long as a two-channel system with two servers operating at the same rate as a single server.
Suppose that R = 1 Gbps and Rc is 300 Mbps and Rs is 200 Mbps. Assuming that the servers are sending at their maximum rate possible, enter the link utilization of the shared link, whose rate is R, below. Enter your answer as a decimal, of the form 1.00 (if the utilization is 1, or 0.xx if the utilization is less than 1, rounded to the closest xx).