A solenoid displaces a material plunger ferromagnetic at a distance of 1 cm. Theinductance of the solenoid in function of the position of the plunger is given by:L(x) = 0,05 – 20000((r - xo)) H,where x ranges from 0 to 0.01 m and xo = 0.25 mIs there a point where the force generated in the plunger is zero? If so, for what valueof x?

A solenoid is a mechanical device that moves and consists of a wire coil, a casing, and a plunger…

A solenoid displaces a material plunger ferromagnetic at a distance of 1 cm. The inductance of the solenoid in function of the position of the plunger is given by: L(x) = 0,05 – 20000((x- ro)) H, where x ranges from 0 to 0.01 m and xo = 0.25 m Is there a point where the force generated in the plunger is zero? If so, for what value of x?

A solenoid displaces a material plunger ferromagnetic at a distance of 1 cm. The inductance of the solenoid in function of the position of the plunger is given by: L(x) = 0,05 – 20000((x- ro)) H, where x ranges from 0 to 0.01 m and xo = 0.25 m Is there a point where the force generated in the plunger is zero? If so, for what value of x?

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter6: Power Flows

Section: Chapter Questions

Problem 6.27P

See similar textbooks

Similar questions

Coaxial cables are often used to connect electrical devices, such as your video system, and in receiving signals in television cable systems. Model a long coaxial cable as a thin, cylindrical conducting shell of radius b concentric with a solid cylinder of radius a as shown. The conductors carry the same current i in opposite directions. Calculate the inductance L of a length ℓ of this cable.
Two ideal solenoids of radii R and 4⁢R , respectively, have n turns per meter, and each carries a current of I. Both currents flow in the same direction. The small‑radius solenoid is placed inside the large-radius solenoid so that their axes of symmetry are parallel and separated by a distance d=2⁢R . Neglecting any magnetic screening effects, express the magnetic field strength on the axis of the small-radius solenoid analytically in terms of the quantities given and the magnetic permeability of a vacuum, μ0 .
A cylindrical long solenoid of length 2000 mm has 20 mm diameter. If number of turns wounded on solenoid is 2000 turns what is value of inductance.
Two very long parallel conducting wires carry currents I1 = 1 A, I2 = 2 A in opposite directions. They hang horizontally from pylons by pairs of insulating cables, each of length a = 1 m, and are a distance d << a apart. The wires have mass m per unit length and the cables make angle theta to the vertical. Find theta. Show solving
Find the capacitance in picofarad between inner and outer curved conductor surfaces shown in the figure containing two dielectrics, εr1 = 4.9 and εr2 = 3.5. Here r1 = 39.4 mm, r2 = 64.4 mm, α1 = 19.7 degrees, α2 = 41.2 degrees and L = 158.6 mm.
Two long straight current-carrying wires are lined up parallel to one another in vacuum at a distancedCurrents of I1 and flow I2 through the wires, both in the same direction generating the field of B Delta f at a midpoint between themWrite down an expression for BM in terms of the currents running in each of the wires Assume vacuum permeability u= 1
The figure is a cross section through three long wires with linear mass density 58.0 g/m. They each carry equal currents in the directions shown. The lower two wires are 4.0 cm apart and are attached to a table. What current I will allow the upper wire to "float" so as to form an equilateral triangle with the lower wires?
An infinitely long coaxial cable has an inner and an outer conductor of radii "a" and "b"respectively. If the space between the conductors is filled with two different dielectrics ofdielectric costants ɛ1 and ɛ2 as shwon below, find the capacitance per unit length of this coaxialcable
The two long coaxial solenoids of radius a and b carry current I= 6 mA but in opposite directions. Solenoids are placed along y-axis as shown in figure. The inner solenoid has 2000 turns per unit length and outer solenoid has 1000 turns per unit length. Calculate Magnetic field intensity inside the inner solenoid will be??
Consider two coaxial solenoids with free space cores. Solenoid A is placed inside Solenoid B and solenoid B carries a current of 2I0 which creates a magnetic flux density of magnitude of B0. If the cross-sectional area, length and number of turns per length of Solenoid A are S, 4h and n respectively, calculate the mutual inductance between Solenoid A and Solenoid B.
A long, solid, cylindrical wire of radius A has a current density given by j = j0r/A. Determine the magnetic field, within the wire, in terms of the total current "I" flowing through the wire.
3. A magnetic circuit consists of a toroidal silicon sheet steel with relative permeability ?? of150, and a small air gap.A current ? flows through 200 turns of wire wrapped around the toroid.The magnetic flux of the circuit is 5 × 10−9 ??. The total length of the circuit is 0.8 m, and thecross-sectional area of the toroid is10−4?2. The length of the air gap is 0.07 m. Findi. the total reluctance and inductance of the circuitii. magnetomotive force and hence the current.?0 = 4? × 10−7?/M