A solid round bar 60 mm in diameter and 2.5 m long is used as a strut. One. of the strut is fixed, while its other end is hinged. Find the safe compressive load for this strut, 4 gEuIef'S formula. Assume E = 200 GN/m? and factor of safety = 3. S

A solid round bar 60 mm in diameter and 2.5 m long is used as a strut. One. of the strut is fixed, while its other end is hinged. Find the safe compressive load for this strut, 4 gEuIef'S formula. Assume E = 200 GN/m? and factor of safety = 3. S

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter11: Columns

Section: Chapter Questions

Problem 11.6.16P: A wide-flange column with a bracket is fixed at the base and free at the top (see figure). The...

See similar textbooks

Related questions

Q: Column AB has a pin support at A, a rollersupport at B, and is compressed by an axial load P(see…

A: A column is a long vertical slender bar or vertical member, subjected to an axial compressive load…

Q: 1. Find the load in members AD and AE for the truss shown in the figure. Use last three digits of…

Q: Problem No. 2: Compute the increase in stress for each element if the temperature increases by 100°F…

A: As per given question We have to find determine increse the strss of each segment

Q: The steel column BD (yield stress = 280 N/mm2) carries a compressive load in the following structure…

Q: using Euler's formula. Assume E = 200 GN/m? and factor of safety 3. Example 16.1. A solid round bar…

A: Condition is one end is fixed and the other end is hinged Data Given Diameter of the solid round…

Q: Question 3 The roof beams of a warehouse are supported by pipe columns having outer diameter d2 =…

A: Find the moment of inertia.

Q: The hollow cylinder shown in Fig. P.14.22 is built-in at one end and carries a vertical load of 2 kN…

A: The bending moment due to force is - M=2×1 kNm=2000×1000 NmThe twisting moment due to force is -…

Q: A steel bar is 900 mm long: its two ends are 40 mm and 30 mm in diameter and the length of each rod…

Q: 1. A vertical column with pinned ends is subjected to an end load P. The column has a radius of…

Q: A load P is supported by a structure consisting of rigid bar ABC, two identical solid bronze [E =…

Q: Problem: Using the method of joints, find all forces on each member and indicate if tension or…

Q: 2. Three wires made of copper, zinc and aluminium are of equal lengths and have cross-sectional…

Q: A circular plate of 80 mm radius and 6 mm thick carries a central load of 2 kN. Calculate the…

A: A circular plate with an 80 mm radius and a thickness of 6 mm supports a central load of 2 kN.When…

Q: w 12mm dia SK 18mm dia. P=12 kN HAD 12mm dia 2 m. 2. Three steel cable jointly support a load of…

Q: A two-story building has steel columns ABin the first floor and BC in the second floor, as shownin…

A: The elongation/compression in a member subjected to axial compressive force can be calculated using…

Q: Calculate the increase in stress for each segment of the compound bar shown in the figure if the…

Q: 2. The horizontal rigid bar AB is hinged (pinned) to a vertical wall at A and supported by two steel…

Q: An aluminum tube AB with a circular crosssection has a sliding support at the base and is pinnedat…

Q: Current Attempt in Progress A circular rod and a 3/8-in-thick rectangular bar are both made of a…

Q: Example 16.1. A solid round bar 60 mm in diameter and 2.5 m long is used as a strut. One t the strut…

A: When one of the column is fixed and the other end is hinged, then equivalent length of beam is…

Q: tube of 5m long ,40mm inner diameter and 80mm outer diameter is used as an euler column. Assuming…

Q: 1. A hollow cast iron column of 150 mm external diameter and 100 mm internal diameter is 3.5 m long.…

Q: Q1 Find the ratio of crippling loads by Euler's and Rankine's formulae for a hollow strut of 40 mm…

A: Given data as per question External diameter =40 mm Internal diameter =30 mm Modulus of elasticity…

Q: 1. A vertical column with pinned ends is subjected to an end load P. The column has a radius of…

A: Given:Radius of gyration of column, r=150 mmcross-sectional area, A=0.02 m2E=200 GPaσ=275 MPaLength…

Q: A plate is connected to another plate via 20 mm diameter rivets. It carries a load of P=155 kN at a…

Q: Rigid bar ABC is supported by bronze rods (1) and (2) as shown below. A concentrated load of P = 35…

A: Given:P=35kipsE=15000 ksiA=0.2 in2L1=11 ftL2=17 ftL3=9 fta=42 inb=78 in

Q: Consider the truss structure with a load of P= 35.4 kN applied at joint C. All the members of the…

A: Let, RD = Vertical force in upward direction at D RAv= Vertical force in upward direction at A RAH =…

Q: A rigid bar of weight W- 810 N hangs frem three equally spaced vertical wires (length L-150 mm,…

A: FBD of rigid bar Area of Aluminium wireAA=π4dA2=π442=12.5664mm2Area of steel wire…

Q: steel pin-ended struts of various lengths, two of the values obtained were: In an experimental…

A: Given data,d=1.2cm=0.012mE=200 GN/m2when struts are in endedLe=L and I=π64d4=π640.0124=1.017×10-9 m4

Q: A rigid beam of negligible weight is supported in a horizontal position by 2 rods made of steel and…

Q: 3) An aluminium pipe column (E=70 GPa) with length L=3 m has inside and outside diameters di-130 mm…

A: Given Data E=70 GPa D1=130 mm D2=150 mm L=3 m

Q: Polycarbonate bars (1) and (2) are attached at their lower ends to a slider block at B that travels…

A: Find the force in each rod and vertical deflection of point B.

Q: The cross - sectional area of an aluminum bar is 170 mm?. It carries an axial load at the positions…

Q: A column has a fixed support at both ends. If the dimensions of the column section are as given in…

A: Given- Fixed support at both ends; L=7 m = 7000 mm E=200 GPa = 2 x 105 MPa

Q: A column, pinned at top and bottom, is made up of two C 10 x 25 steel shapes (see figure) that act…

A: Given data *The length is L = 26 ft *The young modulus of elasticity is E = 30000 ksi

Q: Find the critical load of a Euler’s column having 4 m length, 50 mm x 100 mm cross section and…

Q: A >12 60° |C В - 2.7 m The strut is supported by a pin at C and an A-36 steel (Young's Modulus is…

Q: A. Explain briefly what you understand by the following terms I) strut II) column B. Distinguish…

Q: 1. A steel cable with diameter 25 mm is used in a construction yard to lift a bridge section…

Q: 3M. A 150-mm-diameter wood post is fixed into a large foundation pier at grade and is cc pletely…

A: Given:d=150 mmP=9 KNE=10000 MPa

Q: (A). A bar ABCD consists of three sections: AB is 25 mm square and 50 mm long, BC is of 20 mm…

A: The area of the bar AB is AB=a2=252=625 mm2 The area of the BC is BC=π4d2=π4202=314.15 mm2 The area…

Q: A proving ring is 250 mm mean diameter, 40 mm wide and 6 mm thick. The maximum stress permitted is…

A: Given: Mean diameter of the proving ring→D=250 mm=0.25 m width of the ring→b=40 mm=0.04 m Thickness…

Q: 1. Three vertical rods AB, CD, and EF supports a load of 36 kN. Each of the rods AB and CD has a 200…

A: When an external force is applied to any body the body gets deformed. This deformation is resisted…

Q: An aluminium rod is fixed at its base and free at the top as shown in Figure 1. If the imposed…

A: given; load(P)=200KN =200*103Ndiameter(d)=200mmelasticity(E)=72GPa…

Q: A column of length 1 m is hinged at both ends has cross-section (10 x20) mm2. Young's modulus of…

A: Given data:Length of the column, L=1 mCross-section of column, A=10×20 mm2E=200 GPa

Q: Example 2.20 1.5 m 5 m 1.5 m 10 kN mckreal A concrete structure is subjected to a 10 kN downward…

Q: A load P is supported by a structure consisting of rigid bar ABC, two identical solid bronze [E =…

Concept explainers

Buckling of columns

The column is described as a vertical member of the structure that carries an axial compressive load, and buckling is a lateral deformation of the column under the application of load.

Question

2 T « A solid round bar 60 mm in diameter and 2.5 m long is used as a strut. One. of the strut is fixed, while its other end is hinged. Find the safe compressive load for this strut, 4 gEuIef'S formula. Assume E = 200 GN/m? and factor of safety = 3. S

sing Euler's formula. Assume E = 200 GN/m? and factor of safety = 3.
A.A solid round bar 60 mm in diameter and 2.5 m long is used as a strut. One
f the strut is fixed, while its other end is hinged. Find the safe compressive load for this strut,
Fuler's formula. Assume E = 200 GN/m? and factor of safety 3.
%3D

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A W14 × 53 wide-flange column of a length L = 15 ft is fixed at the base and free at the top (see figure). The column supports a centrally applied load = 120 kips and a load P2= 40 kips supported on a bracket. The distance from the centroid of the column to the load P2is s = 12 in. Also, the modulus of elasticity is E = 29,000 ksi, and the yield stress is y= 36 ksi. Calculate the maximum compressive stress in the column, Determine the factor of safety with respect to yielding.
Column AB has a pin support at A,a roller support at B, and is compressed by an axial load P (see figure). The column is a steel W12 × 35 with modulus of elasticity E = 29,000 ksi and proportional limit pl = 50 ksi. The height of the column is L = 12 ft. Find the allowable value of load P assuming a factor of safety n = 2,5.
A steel pad supporting heavy machinery rests on Four short, hollow, cast iron piers (see figure). The ultimate strength of the cast iron in compression in 50 ksi. The outer diameter of the piers is d = 4.5 in, and the wall thickness is t = 0.40 in. Using a factor of safety of 3.5 with respect to the ultimate strength, determine the total load P that can be supported by the pad.
A round bar of 10 mm diameter is made of aluminum alloy 7075-T6 (see figure). When the bar is stretched by axial forces P, its diameter decreases by 0.0 16 mm. Find the magnitude of the load P. Obtain the material properties from Appendix 1.
A square aluminum bar with pinned ends carries a load P = 25 kips acting at distance e = 2,0 in. from the center (sec figure). The bar has a length E = 54 in. and modulus of elasticity E = 10,600 ksi. If the stress in the bar is not to exceed 6 ksi, what is the minimum permissible width bminof the bar?
A W8 × 28 steel wide-flange column with pinned ends carries an axial load P. What is the maximum permissible length of the column if (a) P = 50 kips, and (b) P = 100 kips? (Assume E = 29,000 ksi and y = 36 ksi.)
AW310 × 74 wide-flange steel column with length L = 3.8 m is fixed at the base and free at the top (see figure). The load P acting on the column is intended to be centrally applied, but because of unavoidable discrepancies in construction, an eccentricity ratio of 0.25 is specified. Also, the following data are supplied: E = 200 GPa, y = 290 MPa, and P = 310 kN. What is the maximum compressive stress max in the column? What is the factor of safety n with respect to yielding of the steel?
A wide-flange column with a bracket is fixed at the base and free at the top (see figure). The column supports a load P1= 340 kN acting at the centroid and a load P2= 110 kN acting on the bracket at a distance S = 250 mm from the load P1The column is a W 310 X 52 shape with L = 5 m, E = 200 GPa, and y = 290 MPa. What is the maximum compressive stress in the column? If the load P1remains at 340 kN, what is the largest permissible value of the load P2in order to maintain a factor of safety of 1.8 with respect to yielding?
A stepped bar ACB with circular cross sections is held between rigid supports and loaded by an axial force P at midlength (see figure). The diameters for the two parts of the bar are d1= 20 ram and d2= 25 mm, and the material is elastoplastic with yield stress s = 250 MPs. Determine the plastic load Pp.
A long, rectangular copper bar under a tensile load P hangs from a pin that is supported by two steel posts (see figure). The copper bar has a length of 2.0 m, a cross-sectional area of4S00 mm", and a modulus of elasticity Ec= 120 GPa. Each steel post has a height of 0.5 m, a cross-sectional area of 4500 mm2, and a modulus of elasticity E = 200 GRa. (a) Determine the downward displacement
A steel column ( E = 30 X 103 ksi) that is fixed at the base and free at the top is constructed of a W8 x 35 wide-flange member (sec figure). The column is 9.0 ft long. The force P acting at the top of the column has an eccentricity e = 1.25 in. If P = 40 kips, what is the maximum compressive stress in the column? If the yield stress is 36 ksi and the required factor of safety with respect to yielding is 2.1, what is the allowable load Pallow?
The figure shows an idealized structure consisting of two rigid bars joined by an elastic connection with rotational stiffness ßR. Determine the critical load PCTfor the structure.