A square steel bar of side length w= 0.13 m has a thermal conductivity of k= 14 J/(s •m.°C) and is L= 2.1 m long. One end is placed near a blowtorch so that the temperature is T= 78° C while the other end rests on a block of ice so that the temperature is a constant T (a) Input an expression for the heat transferred to the cold end of the bar as a function of time, using A= w as the cross-sectional area of the bar. (b) How much energy, in joules, was conducted in 1 hour, assuming T2 = 0° C? (c) Input an expression for the mass of the water melted in 1 hour using Q, from above and Lfthe latent heat of fusion.

A square steel bar of side length w= 0.13 m has a thermal conductivity of k= 14 J/(s •m.°C) and is L= 2.1 m long. One end is placed near a blowtorch so that the temperature is T= 78° C while the other end rests on a block of ice so that the temperature is a constant T (a) Input an expression for the heat transferred to the cold end of the bar as a function of time, using A= w as the cross-sectional area of the bar. (b) How much energy, in joules, was conducted in 1 hour, assuming T2 = 0° C? (c) Input an expression for the mass of the water melted in 1 hour using Q, from above and Lfthe latent heat of fusion.

University Physics Volume 2

18th Edition

ISBN:9781938168161

Author:OpenStax

Publisher:OpenStax

Chapter1: Temperature And Heat

Section: Chapter Questions

Problem 119AP: For the human body, what is the rate of heat transfer by conduction through the body's tissue with...

See similar textbooks

Similar questions

During heavy exercise, the body pumps 2.00 L of blood per minute to the surface, where it is cooled by 2.00C. What is the rate of heat transfer from this forced convection alone, assuming blood has the same specific heat as water and its density is 1050kg/m3 ?
For the human body, what is the rate of heat transfer by conduction through the body's tissue with the following conditions: the tissue thickness is 3.00 cm, the difference in temperature is 2.00 , and the skin area is 1.50 m2. How does this compare with the average heat transfer rate to the body resulting from an energy intake of about 2400 kcal per day? (No exercise is included.)
Two concrete spans that form a bridge of length L are placed end to end so that no room is allowed for expansion (Fig. P16.63a). If a temperature increase of T occurs, what is the height y to which the spans rise when they buckle (Fig. P16.63b)?
A square steel bar of side length w = 0.14 m has a thermal conductivity of k = 14.1 J/(s⋅m⋅°C) and is L = 2.4 m long. Once end is placed near a blowtorch so that the temperature is T1 = 77° C while the other end rests on a block of ice so that the temperature is a constant T2. a) Input an expression for the heat transferred to the cold end of the bar as a function of time, using A = w2 as the cross-sectional area of the bar. Q(t)= b) Input an expression for the mass of the water melted in 1 hour using Q1 from above and Lf the latent heat of fusion. mw=
A square steel bar of side length w = 0.13 m has a thermal conductivity of k = 14 J/(s⋅m⋅°C) and is L = 2.1 m long. One end is placed near a blowtorch so that the temperature is T1 = 78° C while the other end rests on a block of ice so that the temperature is a constant T2. (a) Input an expression for the heat transferred to the cold end of the bar as a function of time, using A = w2 as the cross-sectional area of the bar. (b) How much energy, in joules, was conducted in 1 hour, assuming T2 = 0° C? (c) Input an expression for the mass of the water melted in 1 hour using Q1 from above and Lf the latent heat of fusion.
Consider a very long rectangular fin attached to a flat surface such that the temperature at the end of the fin is essentially that of the surrounding air, i.e., 20°C. Its width is 5.0 cm; thickness is 1.0 mm; thermal conductivity is 200 W/m·K; and base temperature is 40°C. The heat transfer coefficient is 20 W/m2·K. Estimate the fin temperature at a distance of 5.0 cm from the base and the rate of heat loss from the entire fin.
A copper rod has a length of 1.5m1.5m and a cross-sectional area of 4.0×10−4m24.0×10−4m2. One end of the rod is in contact with boiling water and the other with a mixture of ice and water. What is the mass of ice per second that melts? Assume that no heat is lost through the side surface of the rod. Take the thermal conductivity of copper to be k=401W.m.Kk=401W.m.K, and the latent heat of fusion of ice to be 3.35×105J/kg3.35×105J/kg.
Suppose a human body's core internal temperature is 37.0°C, the skin temperature is 34.0°C, the thickness of the tissues between averages 0.85 cm, and the surface area is 1.42 m2. Calculate the rate of heat conduction, in watts, out of the human body.Numeric : A numeric value is expected and not an expression.Q/Δt = __________________________________________
Consider a 20 cm thick granite wall with a thermal conductivity of 2.79 W/m·K. The temperature of the left surface is held constant at 50°C, whereas the right face is exposed to a flow of 22°C air with a convection heat transfer coefficient of 15 W/m2·K. Neglecting heat transfer by radiation, find the right wall surface temperature and the heat flux through the wall.
A brass bar is joined at one end to a 70 cm copper bar and at the other end with boiling water at 1 atm. In order to achieve conductive heat transfer, the copper-free end is brought into contact with a mixture of water and ice also at 1 atm. Both bars have a cross sectional area of 0.00500 m2. The sides of the rods are insulated, so there is no heat loss to the surroundings. If after 5 minutes 50 g of ice melts, find the length of the brass bar.
One end of a brass bar is maintained at 339 oC, while the other end is kept at a constant, but lower, temperature. The cross-sectional area of the bar is 2.05 × 10-4 m2. Because of insulation, there is negligible heat loss through the sides of the bar. Heat flows through the bar, however, at a rate of 2.78 J/s. What is the temperature of the bar at a point 0.207 m from the hot end?
The roof of a house consists of a 15-cm-thick concrete slab (k = 2 W/m·K) that is 15 m wide and 20 m long. The convection heat transfer coefficients on the inner and outer surfaces of the roof are 5 and 12 W/m2·K, respectively. On a clear winter night, the ambient air is reported to be at 10°C, while the night sky temperature is 100 K. The house and the interior surfaces of the wall are maintained at a constant temperature of 20°C. The emissivity of both surfaces of the concrete roof is 0.9. Considering both radiation and convection heat transfers, determine the rate of heat transfer through the roof, and the inner surface temperature of the roof. If the house is heated by a furnace burning natural gas with an efficiency of 80 percent, and the price of natural gas is $1.20/ therm (1 therm = 105,500 kJ of energy content), determine the money lost through the roof that night during a 14-h period.