H.WA steel bar 160cm long under applied loading as shown in figure 4.Find theelongation of bar,take E=2.1x10 N/cm?.23solution9N3cm4N3.Scm3cm, 11N6N50 cm 70cmaocmActivate Windows

Answered: Image /qna-images/answer/be09b25f-80b2-4eed-b528-5a60230adc3c.jpg

Answered: A steel bar 160cm long under applied…

A steel bar 160cm long under applied loading as shown in figure 4.Find the elongation of bar,take E=2.1x10 N/cm2. 2 solution 9N 3.Scm 3cm 3cm 11N 6N 50 cm 70cm 4ocm

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter2: Axially Loaded Members

Section: Chapter Questions

Problem 2.10.5P

See similar textbooks

Related questions

Q: A prismatic bar with a circular cross section is loaded by tensile forces P 65kN. The bar has length…

A: Given, Initial length of the bar, Li=1.75 m Initial diameter of the bar, di=32 mm=0.032 m Applied…

Q: A material having a shear modulus G, is deformed under a pure shear stress as shown in the following…

A: Given, a= 2mm, b= 100 mm and G = 25 GPa

Q: Rod AB consists of two cylindrical portions AC and BC, each with a cross-sectional area of 1950 mm2.…

Q: Two round solid bars of different materials are connected in series against rigid (b) supports as…

A: Given data:

Q: A steel (E = 200 GPa) rod ABC is applied by the axial load as shown in Figure Q2(c). The diameter of…

Q: • Dimensions: width, b = 54 mm, depth, d = 110 mm, and height, h = 284 mm. • The modulus of…

A: Given:b=54 mmd=110 mmh=284 mmE=3 GPav=0.45θ=70°∆d=0.40 mm

Q: An aluminum cable of length 5.0 m and diameter 10 mm is used to hang a load of 1000 kg. The modulus…

Q: Find the maximum load P that the column in Figure 2 can carry without buckling, in tons, E= 318…

Q: A rigid beam is supported by a pin at A and two metallic wires at B and C. Determine the force P…

Q: Example 18. The homogeneous bar AB of 300 N is resting as shown in figure Ex.18. Assuming contact…

Q: Example 7 A steel bar of cross-sectional area 200 mm2 is loaded as shown in Fig. Find the change in…

Q: Figure 5 shows a steel rod of 200 mm length (L) with modulus of elasticity, E = 200 GPa and…

Q: A brass bar having cross-sectional area of 1000 mm2 is subjected to axial forces shown in the Fig.…

Q: Rod AB consists of two cylindrical portions AC and BC, each with a cross-sectional area of 1950 mm2.…

Q: A steel rod 4m long and 20mm diameter is subjected to an axial tensile load of 45KN. Find the change…

Q: When a brass rod of diameter 2 mm is subjected to a tension of Sx10 N, the diameter changes by…

Q: A steel (E = 200 GPa) rod ABC is applied by the axial load as shown in Figure Q2(c). The diameter of…

Q: LA = 2600 mm2 1000 mm E = modulus of elasticity = 200 GPa a = coefficient of thermal expansion

A: Thermal stress is generated inside the rod because of the change in the temperature or temperature…

Q: A rigid beam is supported by a pin at A and two metallic wires at B and C. Determine the force P…

Q: Q2. A thermo gate consist of an aluminum plate AB and a magnesium plate CD, each having a width of…

Q: A rigid beam is supported by a pin at A and two metallic wires at B and C. Determine the force P…

A: Consider the free body diagram: Given: EB=70 GPaEC=200 GPaD=2 mmxc=0.6 mm

Q: A rigid beam is supported by a pin at A and two metallic wires at B and C. Determine the force P…

A: Given: To find: The value of P for the deflection of 6 mm for point C.

Q: A rigid beam is supported by a pin at A and two metallic wires at B and C. Determine the force P…

Q: A steel bar 500 ft long, suspended vertically from one end, supports a load P at its lower end. The…

Q: A rigid beam is supported by a pin at A and two metallic wires at B and C. Determine the force P…

Q: 4 The rectangular block of material of length L and cross-sectional area A fits Snugly between two…

A: The internal resisting force applied by the object when an external force is applied on the object…

Q: A rigid beam is supported by a pin at A and two metallic wires at B and C. Determine the force P…

Q: A B Q.1) A steel bar having cross-sectional area of 1000 mm² is subjected to 100 kN + axial forces…

Q: 30. A compressive load P is transmitted through a rigid plate to three magnesium-alloy bars that are…

Q: The bronze bar 2.7 m long with a cross-sectional area of 415 mm2 is placed between two rigid walls.…

Q: * The rectangular block of material of length L and cross-sectional area A tits snugly between two…

Q: A bar made up of two square sections , one of steel and the other of aluminium is shown in Fig.2 The…

A: Given data: The decrease in length is δl=0.3 mm The modulus of elasticity of steel is Est=205…

Q: The diameter (d) of a solid rod (i.e., with a circular cross-section) is 16 mm and is made from a…

A: Given, Diameter of the rod , d= 16 mm Length of the rod , L =1.75 m Youngs modulus , E =250 GPa…

Q: A brass bar having cross-sectional area of 1000 mm2 is subjected to axial forces shown in the Fig.…

A: When an external force is applied to anybody, the body gets deformed. This deformation is resisted…

Q: A metal wire of length =1.5m. Subjected to load resulted by elongation of 2 mm (AL). If the diameter…

A: Given Data L=1.5 m=1500 mm ∆L=2 mm D=1 mm v=0.24

Q: A vertical bar consists of three prismatic segments A,, A, and A, with cross-sectional areas of…

Q: A rigid beam is supported by a pin at A and two metallic wires at B and C. Determine the force P…

Q: 4(a) A solid circular bar is experiencing axial load F=3 kN as in Figure 4(a). Find the strain…

A: Note- As per our guidelines we are supposed to answer only one question. Kindly repost other…

Q: An element that has Young's modulus is E=70GPA, the Poisson's ratio is v=0.33 and yield stress Y =…

Q: e B) = 70 Gpa

Q: A steel bar of 50mm wide, 12mm thick and 300mm long is subjected to an axial pull of 84KN. Find the…

Q: Find the hoop stress acting on a cylinder with the following information: D= 40 cm in diameter. wall…

Q: 20mm diameter bronze bar 3.4m long is place between two rigid walls. at a temperature of -31°C, the…

A: Given Data D=20 mm L=3.4 m T=-31°C ∆= 4.7mm alpha = 19.59x10^-6 m/(m.°C) E= 87GPa.

Q: • Dimensions: width, b = 54 mm, depth, d = 110 mm, and height, h = 284 m The modulus of elasticity…

A: Given:b=54 mmd=110 mmh=284 mmE=3 GPav=0.45θ=70°σmax=7 MPa

Q: Three cables having an area of 0.05 in^2 each is carrying the load W as shown. With no stress, the…

A: Find the stress in intermediate wire.

Q: A steel beam of length 5 m is heated to a temperature difference of 50 degrees. calculate a) stress…

A: Given data: Length L=5 m Temperature difference △T=50°C Co efficient of thermal expansion…

Q: Q 2: A steel rod having a cross-sectional area of 300 mm2 and a length of 5.5 m is suspended…

A: Given data: Applied load (P) = 30 kN Cross-sectional area (A) = 300 mm2 Length of the bar (L) = 5.5…

Q: Q.3. The bronze bar 3 m long with a cross-sectional area of 350 mm2 is placed between two rigid…

Q: Barra 1 Barra 2 d 2d

A: Given, P = 1400 kN L = 5 m d = 80 mm E = 110 GPa v = 0.33

Concept explainers

Axial Load

When a bar of the uniform cross-section is acted by a load, such that the load acts along the longitudinal axis of the bar, such kinds of loadings are known as axial loadings. In general terms, a load is an external force acting on a component. An axial load acts perpendicular to the geometric cross-section of the component. Based on the direction of the application of the load, an axial load can be tensile or compressive. The analysis of bodies under the action of axial loads is generally studied under the branch of mechanics, known as statics.

Question

H.W
A steel bar 160cm long under applied loading as shown in figure 4.Find the
elongation of bar,take E=2.1x10 N/cm?.
2
3
solution
9N
3cm
4N
3.Scm
3cm, 11N
6N
50 cm 70cm
aocm
Activate Windows

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1 Free Body Diagram of the bar.

VIEW

Step 2 Claculation of elongation of the bar.

VIEW

Step by step

Solved in 2 steps with 4 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A steel wire- and an aluminum allay wire have equal lengths, and support equal loads P (see figure). The moduli of elasticity for the steel and aluminum alloy are Ea= 30,000 ksi and Ea= 11,000 ksi, respectively. (a) IF the wires have the same diameters, what is the ratio of the elongation of the aluminum alloy wire to the elongation of the steel wire? (b) If the wires stretch the same amount, what is the ratio of the diameter of the aluminum alloy wire to the diameter of the steel wire? (c) If the wires have the same diameters and same load P, what is the ratio of the initial length of the aluminum alloy wire to that of the steel wire if the aluminum alloy wire stretches 1.5 limes that of the steel wire? (d) If the wires have the same diameters, same initial length, and same load P. what is the material of the upper wire if it elongates 1.7 times that of the steel wire?
A high-strength steel bar used in a large crane has a diameter d = 2.00 in. (sec figure). The steel has a modulus of elasticity E = 29 × 10 psi and Poisson’s ratio is v = 0.29. Because of clearance requirements, the diameter of the bar is limited to 2.001 in. when it is compressed by axial forces. What is the largest compressive load Pmaxthat is permitted?
Solve the preceding problem for an aluminum plate with h = 10 in.. i = 0.75 in., E = 10,600 ksi, v = 0.33. P = 96 kips. Pt,. = 24 kips. and V =18 kips. For part (b) of Problem 7.5-12, assume that the required strain energy stored is 640 in.-lb. In part (c). the change in volume cannot exceed 0.05%.
A steel rod with a cross-sectional area of 150mm^2 is stretched between two fixed points. The tensile load at 20°C is 5000N. (a) What will be the stress at -20°C? (b) At what temperature will the stress be zero? Assume (E=200x10^9N/m^2, α=11.7 um/cm°C)
3. A 5-m rod having a uniform cross-sectional area of 1000 sq.mm. is secured between two walls5 meters apart. The load on the rod is zero at 27 °C. E = 200 GPa, α = 11.25x10-6 m/m-°C. Whenthe temperature rises to 57°C:a) What is the stress in the rod assuming that the walls are rigid.b) What is the stress in the rod if the walls spring together a total distance of 0.5 mm.
A polyethylene bar with a diameter d,= 4.0 in. is placed inside steel lube with an inner diameter d2=4.01 in.(see figure). the polythylene bar is then conpressed by an axial force p. At what value of the bforce P will the space between the poltyethylene bar and the steel tube be closed ? for polythelene,assume E=200 ksi and v=0.4.
a 20mm diameter bronze bar 3.4m long is place between two rigid walls. at a temperature of -31°C, the gap ∆= 4.7mm. Find the temperature (at degree Celsius) at which the compressive stress in the bar will be 39MPa . Use alpha = 19.59x10^-6 m/(m.°C) and E= 87GPa.
What will be the stress induced in a steel bar when it is heated from 15°C to 60°C, all expansion being prevented? For mild steel, E = 210 GN/m2 and a = 11 x 10"6 per °C
A 5-m rod having a uniform cross-sectional area of 1000 sq.mm. is secured between two walls 5 meters apart. The load on the rod is zero at 27 °C. E = 200 GPa, α = 11.25x10-6 m/m-°C. When the temperature rises to 57°C:a) What is the stress in the rod assuming that the walls are rigid.b) What is the stress in the rod if the walls spring together a total distance of 0.5 mm
A 5-m rod having a uniform cross-sectional area of 1000 sq.mm. is secured between two walls 5 meters apart. The load on the rod is zero at 27 °C. E = 200 GPa, α = 11.25x10-6 m/m-°C. When the temperature rises to 57°C: What is the stress in the rod if the walls spring together a total distance of 0.5 mm
A prismatic bar with a circular cross section is loaded by tensile forces P 65kN. The bar has length L=1.75m and diameter d=32mm. It is made of aluminum alloy with modulus of elasticity E=75GPa and Poisson's ratio is 1/3. Find the percentage decrease in the cross sectional area.
Consider a metal with shear modulus G = 40 GPa and atomic radiusr0 = 0.15 nm. Suppose the metal has a solute that results in a misfit of ε =(R − r0)/r0 = 0.14. Compute the elastic misfit energy per mole of solute.