A steel tape, with a coefficient of linear expansion of 0.0000116/C, is known to be 50 meters long at 20°C. The tape was used to measure a line was found to be 532.28 meters long when the temperature was 35°C. Determine the following: a. Temperature correction per tape length b. Temperature correction for the measured line c. Correct length of the line

A steel tape, with a coefficient of linear expansion of 0.0000116/C, is known to be 50 meters long at 20°C. The tape was used to measure a line was found to be 532.28 meters long when the temperature was 35°C. Determine the following: a. Temperature correction per tape length b. Temperature correction for the measured line c. Correct length of the line

Engineering Fundamentals: An Introduction to Engineering (MindTap Course List)

5th Edition

ISBN:9781305084766

Author:Saeed Moaveni

Publisher:Saeed Moaveni

Chapter18: Mathematics In Engineering

Section: Chapter Questions

Problem 32P

See similar textbooks

Similar questions

A steel tape, known to be of standard length at 20°C, is used in measuring a 3,895.70m line. The coefficient of linear expansion is 0.0000116/1°C. 1.Determine the temperature correction when the temperature is 34°C. 2.Determine the correct length of the line.
A steel tape, with a coefficient of linear expansion of 0.0000116/C, is known to be 100 meters long at 20°C. The tape was used to measure a line was found to be 1532.28 meters long when the temperature was 37°C. Determine the following: Temperature correction per tape length Temperature correction for the measured line Correct length of the line
A surveying team used a 100m tape which is of standard length at 32°C in measuring a certain distance and found out that the length of tape have different tension were applied as shown. Let K = 0.0000116 m/°C. Length of tape (m) Tension Applied (kg) 99.986 10 99.992 14 100.003 20 a. What tension must be applied to the tape at a temperature of 32°C so that it would be of standard length? b. What tension must be applied to the tape at a temperature of 40.6°C so that it would be of standard length?
A steel tape with C=0.0000116 per degree centigrade is known to be 50 m long at 20 °C. The tape was used to measure a line 500 m long when the temperature was 35°C. What is the corrected length of the line?
A steel tape of nominal length 200 m with a plumb bob of mass 16 kg attached to it was used to measure a length down a shaft as 160.852 m. The mean temperature during the measurement was 4 C. If the tape was standardized to be 200.0014m under a tension of 115 N at 20" C temperature, determine the correct measured length. The following data may be used: Mass of tape = 0.07 kg/m Cross-sectional area of tape= 10 mm Coefficient of linear expansion a = 11x 10/°C Modulus of clasticity = 2x 10° Nmm Acceleration due to gravity 9.807 m's.
⦁ A steel tape with coefficient of linear expansion of 0.0000116/0 C is known to be 50 m long at 20 C. The tape was used to measure a line, when the temperature was 30 C. If the corrected distance was found to be 582.424m., Find the measured distance.
24. A 30 m. steel tape is 2 mm too long at 20° C with a pull of 55 N. A rectangle in measured with this tape. The sides are recorded as 144.95 m. and 113.00 m. The average temperature during the measurement is 30° C with a pull of 55 N. Use coefficient of expansion of steel tape as 0.0000116/°C. What is the true area?
A steel tape with a coefficient of linear expansion of 0.0000116 per degree centigrade is known to be 50 m. Long at 20℃. The tape was used to measure a line which was found to be 532.28 meters long when the temperature was 35℃. Determine the following: Temperature correction per tape length. Temperature correction Corrected length of the line.
to measure a base line, a steel tape 30m long standardised at 15 degree Celsius with a pull of 100N was used. Find the correction per tape length, if the temperature at the time of measurement was 20 degree Celsius and the pull exerted was 160N weight of 1cm3 of steel is 0.0786N and weight of the tape=8N, E=210000kg/m2, coefficient of expansion of tape per 1 degree celsius is 0.00000071.
A steel tape with C=0.0000116 per degree centigrade is known to be 50 m long at 20 °C. The tape was used to measure a line 500 m long when the temperature was 35°C. What is the temperature correction for the measured line?
4. A steel tape is 100 m. long at 25°C with a pull of 10 kg. A line was measured and found to be 510.02 m. when the temperature was 35°C using the same pull. If the coefficient of thermal expansion is 0.0000065 /°C. what is the correct length of line?
A steel tape with a coefficient of linear expansion of 0.0000116 m / °C is known to be 50m long at 20°C. The tape was used to measure a line which is found to be 456.28m long when the temperature was 30°C. Determine the following:A.Temperature correction for the measured lineB.Corrected length of the line.