A steel tape with a coefficient of thermal expansion of 0.0000116/°C is known to be 50 m long at 20°C. The tape was used to measure a line that is 642.90 m long when the temperature was 35ºC. a) Calculate the temperature correction per tape length. b) Calculate the correction for the measured line. c) Calculate the correct length of the measured line.

A steel tape with a coefficient of thermal expansion of 0.0000116/°C is known to be 50 m long at 20°C. The tape was used to measure a line that is 642.90 m long when the temperature was 35ºC. a) Calculate the temperature correction per tape length. b) Calculate the correction for the measured line. c) Calculate the correct length of the measured line.

Engineering Fundamentals: An Introduction to Engineering (MindTap Course List)

5th Edition

ISBN:9781305084766

Author:Saeed Moaveni

Publisher:Saeed Moaveni

Chapter11: Temperature And Temperature- Related Variables In Engineering

Section: Chapter Questions

Problem 42P

See similar textbooks

Similar questions

Obtain the values of vapor pressures of alcohol, water, and glycerin at a room temperature of 20 C.
A steel tape with a coefficient of linear expansion of 0.0000116 per degree centigrade is known to be 50 m. Long at 20℃. The tape was used to measure a line which was found to be 532.28 meters long when the temperature was 35℃. Determine the following: Temperature correction per tape length. Temperature correction Corrected length of the line.
A 50 m length of tape is of standard length at temperature of 50.76°C. What would be the error in the length of tape at a temp. of 68°C. Use coefficient of thermal expansion equal to 0.0000116m/°C. a. 0.01 b. 0.02 c. 0.03 d. 0.04
A steel tape with a coefficient of linear expansion of 0.0000116/1°C is known to be 75-m long at 35°C. The tape was used to measure a line which was found to be 532.28 meters long when the temperature was 48°C. Determine the following: a) Temperature correction per tape length b) Temperature correction for the measured line c) Correct length of the line
3. A line was measured with a 50-m tape which was found to be 532.28 m. the tape is known to be of standard length at 20o C with coefficient of thermal expansion of 0.0000116 m/o C. If the corrected length of the measured line is 532.37 m. long, at what temperature was the measurement made?
A steel tape with a coefficient of linear expansion of 0.0000116/oC is know to be 50m long at 20oC. The tape was used to measure a line which was found to be 532.28 meters long when the temperature was 35oC. Determine the following:a) Temperature correction per tape length.b) Temperature correction for the measured line.c) Correct length of the line.
A steel tape, with a coefficient of linear expansion of 0.0000116/C, is known to be 100 meters long at 20°C. The tape was used to measure a line was found to be 1532.28 meters long when the temperature was 37°C. Determine the following: Temperature correction per tape length Temperature correction for the measured line Correct length of the line
4. A steel tape is 100 m. long at 25°C with a pull of 10 kg. A line was measured and found to be 510.02 m. when the temperature was 35°C using the same pull. If the coefficient of thermal expansion is 0.0000065 /°C. what is the correct length of line?
To measure a baseline a steel tape 30m long standardized at 15° with a pull of 80N was used. Find the correction per tape length if the temperature at the time of measurement is 25° and pull exerted is 150N. E= 2×10^5 N/mm²Coefficient of thermal expansion= 11.2×10^-6
Calculate the heat loss from a double-pane glass window consisting of two pieces of glass, each having a thickness of 10 mm with a thermal conductivity of k = 1.3 W/m.K . The two glass panes are separated by an air gap of 7 mm. Assume thermal conductivity of air to be k = 0.022 W/m.K .
⦁ A steel tape with coefficient of linear expansion of 0.0000116/0 C is known to be 50 m long at 20 C. The tape was used to measure a line, when the temperature was 30 C. If the corrected distance was found to be 582.424m., Find the measured distance.
A 50 meter steel tape was used in laying out a distance of 550.55 m. The tape was standardized at 20 Deg Celcius and during the activity the mean temperature observe was 15 Deg Celcius. Determine the correct length to be laid out using the erroneous steel tape. Assume the coeffucuent of linear expansion of the tape to be equal 0.0000116 per 1 Deg Celcius.