A steel ball with the density of 6324 kg/m and the radius of 0,48 cm was dropped into the oil whose viscosity was to bemeasured as is seen in the figure. When the ball attains a constant velocity, the distance that the ball travelled was measured as97 cm within the time interval of 4 sec. Before the experiment, the mass of the 100 ml-oil was measured as 2,8 gr. According tothe data given above, find;a) the density of the oil (in kg/m). (Please do not use any decimal digit.)Yanıt:

Mass of oil measured = 2.8 gram= 0.0028 Kg Volume of oil = 100 ml = 0.1litre 1 liter= 0.001 m3…

Answered: a) the density of the oil (in kg/m).…

Engineering

Mechanical Engineering

a) the density of the oil (in kg/m). (Please do not use any decimal digit.) Yanıt:

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A steel ball with the density of 6229 kg/m and the radius of 0,65 cm was dropped into the oil whose viscosity was to be measured as isseen in the figure. When the ball attains a constant velocity, the distance that the ball travelled was measured as 99 cm within the time interval of 4,7 sec. Before the experiment, the mass of the 100 ml-oil was measured as 2,1 gr. According to the data given above, find; a) the density of the oil (in kg/m ). (Please do not use any decimal digit.) b) the speed of the steel ball after the ball attains a constant velocity (in m/s). (Please use 4 decimal digits.) c) the dynamic viscosity of the oil (in Pa.s) (Please use 3 decimal digits.) d) the flow Reynolds number. (Please use 4 decimal digits.) Please solve this question step by step to reach correct answers. correct answers: a) 21 b) 0,2106 c) 2,715 d) 0,0212
An 18-kg slab slides down a 15° inclined plane on a 3-mm-thick film of oil with viscosity of 0.0814Pa-sec. If the contact area is 0.3m^3, find the terminal velocity of the slab. Neglect air resistance. ans. 5.614 m/s
A shaft 70-mm in diameter is being pushed at a speed of 400mm/s through a bearing sleeve 70.2-mm in diameter and 250mm long. The clearance is filled with oil with a kinematic viscosity of v = 0.005 ?2/? and SG=0.9. Find the frictional resistance exerted by the oil on the shaft in Newtons (N). And when the shaft is fixed axially and rotated inside the sleeve at 2000 rpm, determine the resisting torque exerted by the oil and the power required to rotate the shaft in kiloWatts (kW).
An ideal gas at 250 °C and atmospheric pressure flows through a smooth pipe with ID 6-in. The molecular weight of the ideal gas is 35 g/mol, and its viscosity is 0.002 cP. If the average velocity of the gas is 3.5 m/s, determine the pressure drop per unit length (m).
In the study of fluid phenomena, how does Newton's Law of Viscosity affect your calculations?
A plate separated by 0.5mm from a fixed moves at 0.50 m/s under a force per unit area of 4.0 N/m². Determine the viscosity of the fluid between the plates.
The figure below represents a cylinder C i (d = 11 cm) that is inside a hollow cylinder (d = 11.1 cm). The inner cylinder, with a mass of 30 kg and a length of 25 cm (L), is subjected to a pressure P of 50 kPa at its bottom, rising at a constant speed of 2.5 m/s. a) Determine the dynamic viscosity of the lubricating oil that must be placed in the space between the piston and the cylinder; b) Determine the kinematic viscosity knowing that it consists of a mixture of 3 L of oil A (specific mass of 880 kg/m 3 ) and 2200 mL of oil B (specific mass of 940 kg/m 3 ). Data: g = 9.81 m/s 2
Q7) A flat plate of area 1.5 x 106 mm2 is pulled with a speed of 0.5 m/s relative to another plate located at a distance of 0.2 mm from it. Find the force and power required to maintain this speed, if the fluid separating them is having viscosity as 1 Pois
A block of mass 4.0 kg moves horizontally on a film of crude oil at 30°C. The contact area of the undersurface is 0.06 m². If initially the block has a speed of 3.0 m/s, find the speed after 1 s. Dynamic viscosity of crude oil at 30° is 1.65 x 10-3 Pa.s. The oil film thickness below block is 0.3mm.
What is Reynold’s number? What is its relevance in fluid flow. Define viscosity and ts properties.
A fluid sample is contained between two parallel plates separated by a distance of 2+- 0,1mm . The area of the plates is 100+- 0,01 cm². The bottom plate is stationary, and the top plate moves at a velocity of 1 cm/s when a force of 315+- 25 dynes is applied to it, and at 5 cm/s when a force of 1650+- 25 dynes is applied. (a) What is the viscosity of this fluid? (b) What is the rheological behavior of this fluid and discussing this behavior? (c) What is the range of uncertainty for your answer in item (a).
A thin plate travels between two plane, parallel, horizontal and stationary surfaces at a constant speed of 7 m/s. The two stationary surfaces are spaced 6 cm apart, and the middle is filled with oil of viscosity of 0.9 Ns/m2.The moving plate submerged in oil has a length of 2 m and a width of 0.5 m. (i) If the plate moves through the mid-plane between the surfaces, determine the force required to maintain this motion. (ii) Determine the force if the plate was 1 cm from the bottom surface and 2 cm from the top surface?