A thin-walled cylindrical pressure vessel has a diameter of 1.7 metres and contains gas at a pressure of 24 MPa. The wall thickness of the vessel is 9.6 mm. Determine the magnitude of the hoop stress in the tank. Input your answer in units of MPa to one decimal place. So if the value is 71.5E06, just enter "71.5".

A thin-walled cylindrical pressure vessel has a diameter of 1.7 metres and contains gas at a pressure of 24 MPa. The wall thickness of the vessel is 9.6 mm. Determine the magnitude of the hoop stress in the tank. Input your answer in units of MPa to one decimal place. So if the value is 71.5E06, just enter "71.5".

Name: A thin-walled cylindrical pressure vessel has a diameter of 1.7 metre
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: A thin-walled cylindrical pressure vessel has a diameter of 1.7 metres and containsgas at a pressure of 24 MPa. The wall thickness of the vessel is 9.6 mm. Determinethe magnitude of the hoop stress in the tank.Input your answer in units of MPa to on

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter8: Centroids And Distributed Loads

Section: Chapter Questions

Problem 8.121P: One side of the container has a 03-m square door that is hinged at its top edge. If the container is...

See similar textbooks

Similar questions

A 4-ft diameter spherical tank is subjected to an internal pressure of 12 psf. If the wall thickness is 0.38", determine the tangential stress of the wall in psi.
A 6-ft diameter spherical tank is subjected to an internal pressure of 12 psf. If the wall thickness is 0.43", determine the tangential stress of the wall in psi. hellooo pls help kinda urgent ty!!
An upright cylindrical tank 15 m in diameter and 13 m high is completely filled with water determine the minimum thickness of the tank plating if the stress is limited to 40 Mpa.
A cylindrical steel tank having an internal diameter of 50 in. is submerged in seawater (weight density =64⁢ lb/ft3) to a depth of 9750 ft. The internal gage pressure in the tank is 1600 psi. (a) If the allowable stress of the steel is 32 ksi, what is the minimum allowable outside diameter of the tank? (b) What is the maximum tensile stress before the tank is immersed? Determine the external pressure of the seawater at a depth of 9750 ft. po= psi Determine the maximum magnitude of σr produced in the tank. σr = psi Based on the maximum magnitude of σr produced in the tank from Part 2, is there an outside diameter for which the radial stress magnitude will exceed the allowable stress of the steel in this case? More calculations are needed. No Yes For this case, choose the correct statement regarding the maximum magnitude circumferential normal stress. It occurs at the outer surface of the tank, and it is tensile. It occurs at the outer surface of the tank, and it…
Design the thickness of the cylinder tank in the shown figure if it is to be filled with oil whose density is 790 kg/m³. The maximum stress of the material is 70MPa. Steel tank dimensions are D = 2.5m and L = 4m.
A thin-walled hollow sphere 3.8 m in diameter holds helium gas at 1767 kPa. Determine the minimum wall thickness of the sphere in mm if its allowable stress is 84.8 MPa.
Determine the magnitude of the force on the inclined gate 1.5m by 0.5m shown in the figure. The tank of water is completely closed and the pressure gage at the bottom of the tank reads 90,000 N/m2. Use 9800 N/cubic meter for water? Ans: 48022.5N
The strength per meter of the longitudinal joint in the figure is 480 kN, whereas or the girth joint is 200 kN. Determine the maximum diameter of the cylindrical tank if the internal pressure is 1.5 MPa.
The Bulk Modulus of 1 kg of water is 2.2 GPa. If the percentage reduction in volume is 6%, determine the pressure applied. Express your answer in the appropriate SI unit Round off ONLY the final result to three decimal places as applicable.
A hydraulic cylinder filled with water has an inside diameter of 1.0 in and a length of 2.0 ft. How many pounds of force must be applied to a piston at the end of the cylinder to compress the water by 0.1 in? Take the bulk modulus of water to be K=312,000 psi.
PLEASE ANSWER THEM ASAP ALL FOR AN UPVOTE. I PROMISE THAT. At 20 0 C, determine pressure (in N/m²) inside a water droplet having diameter of 1.5 mm with a surface tension of 0.053 N/m. a.) What is the working formula of pressure to be used in this problem? b.)What is the diameter of the droplet (in m - enter your complete answer in decimal system)? c.) What is the radius of the droplet (in m - enter your complete answer in decimal system)? d.) What will be the modified working equation to be used to solve this problem based from the given? e.) What is the pressure inside the droplet of water (in N/m²)? f.)What is the pressure inside the droplet of water (converted to its CGS unit)?
QUESTION 3 A thin spherical pressure vessel is required to contain 18 m3 of water at a gauge pressure of 700 KPa. Assuming the efficiency of all riveted joints to be 75%, and the maximum stress should not exceed 140 MPa. Determine: 3.1 The diameter of the vessel 3.2 The thickness of the plate