A three-phase synchronous generator has a synchronous reactance of 50 Ω/phase. It is connected to an infinite bus of line voltage 15,000 V , and it develops a total power of 5 MVA supplying with unity pf. If the armature voltage of the generator is increased by 15%, while the input power to the generator remains constant, determine the new power factor and the apparent power supplied to the grid.it supplies to the network.

A three-phase synchronous generator has a synchronous reactance of 50 Ω/phase. It is connected to an infinite bus of line voltage 15,000 V , and it develops a total power of 5 MVA supplying with unity pf. If the armature voltage of the generator is increased by 15%, while the input power to the generator remains constant, determine the new power factor and the apparent power supplied to the grid.it supplies to the network.

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.21P: An industrial plant consisting primarily of induction motor loads absorbs 500 kW at 0.6 power factor...

See similar textbooks

Similar questions

For the circuit element of Problem 2.3, calculate (a) the instantaneous power absorbed, (b) the real power (state whether it is delivered or absorbed). (c) the reactive power (state whether delivered or absorbed). (d) the power factor (state whether lagging or leading). [Note: By convention the power factor cos() is positive. If | | is greater than 90, then the reference direction for current may be reversed, resulting in a positive value of cos() ].
A 100KVA, 220V, a star-connected alternator is loaded at full load and at 60% pf lagging.The effective AC resistance per phase is 0.01411Ω. If the synchronous reactance is 4.5times the effect of the armature leakage reactance wherein the later is 0.046 Ω perphase, find(a) the phase voltage that would be generated at the load if the circuit were operating normally(b) What no-load open-circuit phase voltage must be present in order to circulate full-load current in short-circuit state while maintaining the same speed and field current?(c) What is the terminal phase voltage of the alternator when it is under a shorted load condition? Give an explanation in support of your response using just one sentence. The IA phasor should be used as the reference one.
A 3-phase, 420 V, 60 Hz, Y-connected synchronous generator, with a synchronous reactance of 1.20 Ohm per phase is connected to an infinite bus. The power angle, when supplying 110 kW to the bus is 30 degree. What will be the total apparent power (in kVA) injected by this generator to infinite bus? (a) 118.28 (c) 110.52 (b) 118.74 (d) 100.39
A 25 kVA, 240 V single phase source supply the rated power at the rated voltage to a motor at 0.8 power factor lagging. Find the capacitor bank in order to improve the power factor to 0.9 lagging connected to a motor.a. Calculate the real power, reactive power and current before capacitor bank is connected? b. Calculate the power and reactive power after capacitor bank is connected? c.What is kVA rating of capacitor bank QC?
Electromechanical energy conversion (One AC induction motor and one AC synchronous motor were operated connected to an infinite bus of 600V. Power factor of the induction motor is 0,7 (lagging) and consumes 400 W from the bus. Synchronous motor consumes 300 W from the bus. If the power factor of the synchronous motor is 0,9 (lagging) find the line current from the bus, for the total of two motors (IL total 1) of the line that connects the motors with the bus and find the total appearent power (SL total 1) of the motors consumed from the bus. When the induction motor has the same conditions, if the power factor of the synchronous motor is 0,9 (leading) find the line current from the bus, for the total of two motors (IL total 2) of the line that connects the motors with the bus and find the total appearent power (SL total 2) of the motors consumed from the bus.
Consider the following power system model with the following entities:i. A generator generates a sinusoidal waveform with amplitude of 300 V and angular frequency of 5 radians,ii. The transmission line has a resistance of 1Ω, andiii. A capacitive load with a value of 2F presents at the end of the system. Answer the following questions:(a) Draw the relevant diagram and label all entity values of the power system as described above.(b) Replacing the real source in Figure from part (a) with a complex source, find the response of the steady-state capacitor voltage in time-domain.(d) Repeat the sub-question (a) above, now showing calculations in s-domain.
Consider the following power system model with the following entities:i. A generator generates a sinusoidal waveform with amplitude of 300 V and angular frequency of 5 radians,ii. The transmission line has a resistance of 1Ω, andiii. A capacitive load with a value of 2F presents at the end of the system. Answer the following questions:(a) Draw the relevant diagram and label all entity values of the power system as described above.(b) Replacing the real source in Figure from part (a) with a complex source, find the response of the steady-state capacitor voltage in time-domain.(c) Repeat the sub-question (a) above, now showing calculations in frequency-domain.(d) Repeat the sub-question (a) above, now showing calculations in s-domain.
It is desired to purchase a synchronous condenser to correct the 2,400-KVA 0.67-lagging power factor load in an industrial plant to 0.95 lagging. Neglect losses, calculate: (a) the kilovolt-ampere input rating of the required synchronous condenser; (b) the total kilovoltamperes of the plant. Using the phasor diagram.
Design a power factor correction circuit with the value of parallel capacitance needed tocorrect a load of 179 kVAR at 0.85 lagging pf to unity pf. Assume that the load issupplied by a 110-V (rms), 60-Hz line.
S.2) The serial impedance of the 300 km power transmission line is 23 + j75 ohm / phase and the shunt acceptance is j500 microS / phase. A power of 50 MW with a power factor of 0.88 under 220 kV interphase voltage from the end of the power transmission line being shot. Using these data of the energy transmission line, a) Characteristic impedance of the energy transmission line, b) Natural apparent power of the energy transmission line according to the 220 kV interphase operating voltage, c) The values of the line parameters A, B, C and D of the transmission line using hyperbolic functions, d) Calculate the maximum power that the power transmission line can transmit.
A balance 3-phase, 220V, abc source initially has a load which is a 3-phase induction motor rated 60 Hp, 0.85 efficiency, 0.8 p.f. lagging. If it is desired to improve the power factor of the system from 0.8 to 0.95 pf lagging by adding a 3-phase synchronous motor that will operate at 0.85 pf leading. What is the KW input of the synchronous motor needed to do this?
T e R e s e e e s 516 A three-phase, Y-connected synchronous generator is fated at 200KVA aud 2300 V. Jtis supplying rated current at rated terminal voltage (0 a 08 Jagang pf load. When the load is completely disconnected (without any change of field exitation), {he terminal voltage rises to 3800 V. (@ Draw a phasor diagram, illustrating the foregoing load condition. Mark each phasor by its symbol and its numerical yalue. () Calculate the synchronous reactance of this generator. Assume o negligible. e L R D ST