Electromechanical energy conversion (One AC induction motor and one AC synchronous motor were operated connected to an infinite bus of 600V. Power factor of the induction motor is 0,7 (lagging) and consumes 400 W from the bus. Synchronous motor consumes 300 W from the bus. If the power factor of the synchronous motor is 0,9 (lagging) find the line current from the bus, for the total of two motors (IL total 1) of the line that connects the motors with the bus and find the total appearent power (SL total 1) of the motors consumed from the bus. When the induction motor has the same conditions, if the power factor of the synchronous motor is 0,9 (leading) find the line current from the bus, for the total of two motors (IL total 2) of the line that connects the motors with the bus and find the total appearent power (SL total 2) of the motors consumed from the bus.

Electromechanical energy conversion (One AC induction motor and one AC synchronous motor were operated connected to an infinite bus of 600V. Power factor of the induction motor is 0,7 (lagging) and consumes 400 W from the bus. Synchronous motor consumes 300 W from the bus. If the power factor of the synchronous motor is 0,9 (lagging) find the line current from the bus, for the total of two motors (IL total 1) of the line that connects the motors with the bus and find the total appearent power (SL total 1) of the motors consumed from the bus. When the induction motor has the same conditions, if the power factor of the synchronous motor is 0,9 (leading) find the line current from the bus, for the total of two motors (IL total 2) of the line that connects the motors with the bus and find the total appearent power (SL total 2) of the motors consumed from the bus.

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.21P: An industrial plant consisting primarily of induction motor loads absorbs 500 kW at 0.6 power factor...

See similar textbooks

Similar questions

A manufacturing plant takes 200,000 Watts, at 0.6 power factor. Form a 600 V, 60 Hz, three phase system. It is desired to raise the power factor of the entire system to 0.9 by means of a synchronous motor, which at the same time is to drive a direct current shunt motor generator, requiring that the synchronous motor take 80,000 watts form the line. What should be the rating of the synchronous motor in volts and amperes?
A power plant comprises three turbine-generators rated 1000 MW, 800 MW and 600 MW respectively. The regulation constant of each generator is 0.05 pu based on its own rating. Each unit is initially operating at one-half of its own rating, when the system load suddenly increases by 250 MW. Calculate the following:a) Per-unit area frequency response characteristic on a 1000 MW system base [CR9]b) Steady-state drop in area frequency [CR4]c) The share of the load increase on each generator [CR9]d) Total load on each generator after the increase in system load [CR3]Assume the reference power setting of each turbine is unchanged.
An area of an interconnected power system has two fossil-fuel operating on economic dispatch. The variable operating costs of these units are given by in image Determine the power output of each units, the incremental operating cost, and the total operating cost that minimizes when total load demand is 250, 500, 750, 1000 and 1250 MW, transmission losses is neglecting?
A factory load consists of the following: input power of Induction motor is 40000 W at 0.76 power factor, input power of the synchronous motor is 24000 W with 0.81 power factor leading and lighting load of 10 kW at unity p.f. Find the annual electrical charges if the tariff is 390 baisa per kVA of maximum demand per annum plus 31 baisa per kWh, assuming the load to be steady for 2500 hours in a year. Annual electrical charges=______________________ Rial
Show that an alternator running in parallel on constant-voltage and frequency bus-bars has a natural time period of oscillation. Deduce a formula for the time of one complete oscillation and calculate its value for a 5000-kVA, 3-phase, 10,000-V machine running at 1500 r.p.m. on constant 50-Hz bus-bars. The moment of inertia of the whole moving system is 14,112 kg-m2 and the steady short-circuit is five times the normal full-load value. ANSWER IS [1.33 second]
Calculate for full-load and unity p.f., the natural period of oscillation of a 50-Hz, 10,000-kVA, 11-kV alternator driven at 1500 r.p.m. and connected to an infinite bus-bar. The steady short-circuit current is four times the full-load current and the moment of inertia of the rotating mass is 17,000 kg-m2. ANSWER IS [1.148 second]
The data obtained in the idling test performed on a three-phase star-connected asynchronous motor; It is 1200V, 5500W, 9.5A. The data obtained in the short circuit experiment on the same motor is 250V,It is 14500W and 100A. For the case where the slip of the motor is 5%, create the approximate equivalent circuit of the motor (L type equivalent circuit), draw the equivalent circuit, find the values of the circuit elements and MUST AND MUST write them ON THE EQUIVALENT CIRCUIT. R and X values will be used in circuit elements, not Z.
A power plant comprises three turbine-generators rated 1000 MW, 800 MW and 500 MW respectively. The regulation constant of each generator is 0.05 pu based on its own rating. Each unit is initially operating at one-half of its own rating, when the system load suddenly increases by 300 MW. Calculate the following:a) Per-unit area frequency response characteristic on a 1000 MW system base.b) Steady-state drop in area frequency [CR4]c) The share of the load increase on each generator.d) Total load on each generator after the increase in system load.Assume the reference power setting of each turbine is unchanged.
List and Describe the functions of the components that needed to be designed and calculated in designing a diesel electric power plant
A 2-pole, 50 Hz, 11 kV synchronous generator with a rating of 120 MW and 0.87 lagging power factor has a moment of inertia of 12,000 kg- . Calculate the constants H and M A 4-pole synchronous generator supplies over a short line a load of 60 MW to a load bus. If the maximum steady state capacity of the transmission line is 110 MW, determine the maximum sudden increase in the load that can be tolerated by the system without losing stability
Question # 4 An industrial load consists of: A synchronous motor of 150 h.p. Induction motors aggregating 200 h.p., 0.707 power factor lagging and 82 % efficiency. Lighting load aggregating 30 KW. The tariff is Rs. 100 per annum per KVA maximum demand plus 8 paisa per KWH. Compute the following: Total annual bill when synchronous motor runs with 0.8 power factor lagging and efficiency of 94 %? Total annual bill when synchronous motor runs with 0.8 power factor leading and efficiency of 94 %? Annual saving in cost if synchronous motor is operated at leading power factor?
MERALCO Electrician has a 25 kW series generator used in street lighting has anefficiency of 85 % when operating at rated load. If the stray power loss is 20 %of the full load loss, calculate the efficiency of the generator when delivering aload of 15 kW, assuming that the stray power loss is substantially constant andthe other losses vary as the square of the load.