A vehicle weighs 1.6tons and for each wheel the diameter is 5.7m and the Mass moment of inertia is 4.7kg.m2. The coefficient of friction between the wheels and the road surface is 0.28. Calculate the deceleration of the vehicle if all of the wheels are locked after the brakes are suddenly applied. Given g=9.81m/s 2 (give answer as positiv

A vehicle weighs 1.6tons and for each wheel the diameter is 5.7m and the Mass moment of inertia is 4.7kg.m2. The coefficient of friction between the wheels and the road surface is 0.28. Calculate the deceleration of the vehicle if all of the wheels are locked after the brakes are suddenly applied. Given g=9.81m/s 2 (give answer as positiv

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter7: Dry Friction

Section: Chapter Questions

Problem 7.48P: Find the smallest distance d for which the hook will remain at rest when acted on by the force P....

See similar textbooks

Similar questions

Solve Prob. 7.10 assuming that the pick-up truck has front-wheel drive.
Find the smallest distance d for which the hook will remain at rest when acted on by the force P. Neglect the weight of the hook, and assume that the vertical wall is frictionless.
consider the mass and pulley system in the attached file. mass m1 = 29 kg and mass m2 = 12kg. the angle of the inclined plane is given and the coefficient of kinetic friction between mass m2 and the inclined plane is uk = 0.12. assume the pulleys are massless and frictionless what is the acceleration of mass m2 on the inclined plane? take positive acceleration to be up the ramp a2 = ?
A manufacturer is carrying out a vehicle performance analysis and subjects to a road test. The vehicle is driven along a horizontal road at velocity V. The vehicle weighs 1.79tons and for each wheel the radius is 0.31m and the MMofI is 5.53kgm2. The coefficient of friction between the wheels and the road surface is 0.43. Given g=9.81m/s2 and the length between the center of rear and front wheel is 3.9m. The height of center of gravity is 0.95m while its horizontal distance to the center of rear wheel is 1.72m. If only the front wheels are locked and there is no rear wheel braking, calculate the deceleration (m/s) of the vehicle. Submit your answer as a positive value.
3. A vehicle, mass 1400 kg, passes a bend at a speed of 54 km/hr. The radius of curvature of the road is 60 m. Determine the minimum coefficient of static friction between the car tires and the road, so that the car can pass through corners safely.
A 2000-lb bike with a rear wheel drive has awheelbase of 10 ft. The c.g. is 3 ft above thepavement and 4 ft ahead of the rear wheels.The coefficient of friction is 0.60 between thetires and the pavement. Determine the inertia force on themotorcycle when the acceleration ismaximum.a. 2846.57 lbs b. 2675.66 lbsc. 2864.75 lbs d. 2666.75 lbs
consider the mass and pulley system in the attached file. mass m1 = 29 kg and mass m2 = 12kg. the angle of the inclined plane is given and the coefficient of kinetic friction between mass m2 and the inclined plane is uk = 0.12. assume the pulleys are massless and frictionless when mass m2 moves a distance 4.94 m up the ramp, how far downward does mass m1 move? d= ?
A block of mass 14 kg is resting on a table is pulled by a force of 100 N. The coefficient of friction between table and block is .34. Calculate the acceleration of the block.
A block of mass M1 resting on an inclined plane is connected by a string and pulleys to another block of mass M2 as shown in Fig. Find the tension in the string and acceleration of the blocks. Assume the coefficient of friction between the blocks M1 and the plane to be 0.2. M1=1500N , M2=1000N . Angle of inclined glane = 45 degrees
11. Box A (mass 50 kg) and box B (mass 200 kg) shown in Figure 9 are released from rest. Here the mass of pulleys is ignored. The coefficient of copper friction between box A and box B is 0.1, the coefficient of copper friction between box B and slope is 0.2, and the angle of slope is 20 degrees. Answer each of the following questions.1) Calculate the acceleration (m/s^2) of box A.2) Find the tension size (lb).3) If box A and box B are obtained when box B moves 1.0m, explain why it is not possible to apply the Principle of Work & Energy to the entire box A, box B and pulley system, and obtain the speed (m/s) of box A and box B when box B moves 1.0m down.4) When box B moves 2m, calculate the speed (m/s) of box A using the Modified energy supply law.
A block having a mass of 60kg is subjected to a force, P =337.5N acting 53 degrees from the horizontal that causes it to have an acceleration of 1.2m/s2. Determine the coefficient of kinetic friction.NOTE: use 3 decimal places
Calculate the expected acceleration (Eq. 2) and the experimental acceleration (Eq. 3). This hanging mass will supply the unbalanced (net) force acting on the cart. The track is assumed to be frictionless, so the only force present is that from the hanging mass. m1 (hanging mass), m2 (cart).