A water-cooled spherical object of diameter 10 mm and emissivity 0.9 is maintained at 4000 C. What is the net transfer rate from the oven walls to the object? A surface of area 0.5 m² , emissivity 0.8 and temperature 150 °C is placed in a large, evacuated chamber whose walls are maintained at 25°C. What is the rate at which radiation is emitted by the surface? What is the net rate at which radiation is exchanged between the surface and the chamber walls?

A water-cooled spherical object of diameter 10 mm and emissivity 0.9 is maintained at 4000 C. What is the net transfer rate from the oven walls to the object? A surface of area 0.5 m² , emissivity 0.8 and temperature 150 °C is placed in a large, evacuated chamber whose walls are maintained at 25°C. What is the rate at which radiation is emitted by the surface? What is the net rate at which radiation is exchanged between the surface and the chamber walls?

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter11: Heat Transfer By Radiation

Section: Chapter Questions

Problem 11.35P

See similar textbooks

Similar questions

A long wire 0.7 mm in diameter with an emissivity of 0.9 is placed in a large quiescent air space at 270 K. If the wire is at 800 K, calculate the net rate of heat loss. Discuss your assumptions.
A surface of area 0.5 m², emissivity 0.8 and temperature 150° C is placed in a large, evacuated chamber whose walls are maintained at 25°C. What is the rate at which radiation is emitted by the surface? What is the net rate at which radiation is exchanged between the surface and the chamber walls?
A chamber for heat curing large aluminum sheets lacquered black on both sides operates by passing the sheets vertically between two steel plates 150 mm apart. One of the plates is at 300°C, and the other exposed to the atmosphere, is at 25°C. i) What is the temperature of the lacquered sheet? and ii) What is the heat transferred between the wall when equilibrium has been reached? Neglect the convection effects and the emissivity of lacquered sheet is 1.
A long cylinder of diameter 0.4 m is at 1000 K and has an emissivity of 0.4. A coaxial cylinder of 1 m dia having surface emissivity of 0.6 maintained at 400°C surrounds the smaller cylinder. It is proposed to use a shield having an emissivity of 0.1. Compare the heat reduction if the shield diameter is 0.6 m.
A long cylinder of diameter 0.4 m is at 1000 K and has an emissivity of 0.4. A coaxial cylinder of 1 m dia having surface emissivity of 0.6 maintained at 400°C surrounds the smaller cylinder. It is proposed to use a shield having an emissivity of 0.1. Compare the heat reduction if the shield diameter is (i) 0.6 m and (ii) 0.8 m based on 1 m2 of surface used.
A small sphere (emissivity =0.503 radius=r1) is located at the center of a spherical abestos shell ( thickness =1.74 cm, outer radius= r2; thermal conductivity of abestos is 0.090 J/ (sm c degrees) The thickness of the shell is small compared to the inner and outer radii of the shell. The temperature of the small sphere is 695 degrees Celsius while the temperature of the inner surface of the shell is 352 degrees Celsius, both temperatures remaining constant. Assuming that r2/r1 =8.75 and ignoring any air inside the shell, find the temperature in degrees Celsius of the outer surface of the shell.
An electric heating system is installed in the ceiling of a room 5 m (length), 5 m (width) and 2.5 m (height). The temperature of the ceiling is 315 K whereas under equilibrium conditions the walls are at 295 K. If the floor is non-sensitive to radiations and the emissivities of the ceiling and wall are 0.75 and 0.65 respectively. Calculate the radiant heat loss from the ceiling to the walls?
Heat is generated in a sphere of radius 1 m at a rate of 1000 W/m3. The sphere is surrounded by air at 27 oC.A. Balance total energy produced by the total energy lost from the surface by convection and radiation tocalculate the surface temperature.B. Solve the heat transfer problem in the sphere and use the temperature calculated in A as the boundarycondition to determine the temperature at the center of the sphere.Assume that the sphere can be treated as a black body for calculating radiation losses.Properties The thermal conductivity is given to be k =2.5 W/m°C.σ = 5.67 × 10−8 W / (m2 x K4). Heat transfer coefficient h = 10 W/(m2 K)
During periods of high activity, the Sun has more sunspots thanusual. Sunspots are cooler than the rest of the luminous layer of theSun’s atmosphere (the photosphere). Paradoxically, the total poweroutput of the active Sun is not lower than average but is the same orslightly higher than average. Work out the details of the followingcrude model of this phenomenon. Consider a patch of thephotosphere with an area of 5.10 × 1014 m2. Its emissivity is 0.965.a) Find the power it radiates if its temperature is uniformly 5800oK,corresponding to the quiet Sun.b) To represent a sunspot, assume 10.0% of the patch area is at4800oK and the other 90.0% is at 5890oK. Find the poweroutput of the patch.
A loaf of bread having a surface temperature of 373 K is being baked in an oven whose walls and the air are at 477.4 K. The bread moves continuously through the large oven on an open chain belt conveyor. The emissivity of the bread is estimated to be 0.85, and the loaf can be assumed to be a rectangular solid 114.3 mm high × 114.3 mm wide × 330 mm long. Calculate the radiation heat-transfer rate (in SI and AES units) to the bread, assuming that it is small compared to the oven and neglecting natural convection heat transfer.