A surface of area 0.5 m², emissivity 0.8 and temperature 150° C is placed in a large, evacuated chamber whose walls are maintained at 25°C. What is the rate at which radiation is emitted by the surface? What is the net rate at which radiation is exchanged between the surface and the chamber walls?

A surface of area 0.5 m², emissivity 0.8 and temperature 150° C is placed in a large, evacuated chamber whose walls are maintained at 25°C. What is the rate at which radiation is emitted by the surface? What is the net rate at which radiation is exchanged between the surface and the chamber walls?

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter11: Heat Transfer By Radiation

Section: Chapter Questions

Problem 11.35P

See similar textbooks

Similar questions

A long wire 0.7 mm in diameter with an emissivity of 0.9 is placed in a large quiescent air space at 270 K. If the wire is at 800 K, calculate the net rate of heat loss. Discuss your assumptions.
Three thin sheets of polished aluminum are placed parallel to each other so that the distance between them is very small compared to the size of the sheets. If one of the outer sheets is at 280C and the other outer sheet is at 60C, calculate the temperature of the intermediate sheet and the net rate of heat flow by radiation. Convection can be ignored.
1.11 Calculate the heat loss through a glass window 7-mm thick if the inner surface temperature is 20°C and the outer surface temperature is 17°C. Comment on the possible effect of radiation on your answer.
Determine the power requirement of a soldering iron in which the tip is maintained at 400C. The tip is a cylinder 3 mm in diameter and 10 mm long. The surrounding air temperature is 20C, and the average convection heat transfer coefficient over the tip is 20W/m2K. The tip is highly polished initially, giving it a very low emittance.
11.41 Determine the steady-state temperatures of two radiation shields placed in the evacuated space between two infinite planes at temperatures of 555 K and 278 K. The emissivity of all surfaces is 0.8.
Two large parallel plates with surface conditions approximating those of a blackbody are maintained at 816C and 260C, respectively. Determine the rate of heat transfer by radiation between the plates in W/m2 and the radiative heat transfer coefficient in W/m2K.
1.26 Repeat Problem 1.25 but assume that the surface of the storage vessel has an absorbance (equal to the emittance) of 0.1. Then determine the rate of evaporation of the liquid oxygen in kilograms per second and pounds per hour, assuming that convection can be neglected. The heat of vaporization of oxygen at –183°C is .
A 4.0-cm-diameter sphere is heated to a temperature of 200°C and is enclosed in a large room at 20 C. Calculate the radiant heat loss if the surface emissivity is 0.6.
An electric hot plate is placed in a room which is maintained at a temperature of 297 K. The plate is maintained at a temperature of 403 K and has an emissivity of 0.8. If the plate surface resembles a circular disc of diameter 250 mm, electrical power consumed by the hot plate will be?
A long electrical conductor of 10 mm diameter is concentric with a refrigerated cylindrical tube of 50 mm diameter whose surface has an emissivity of 0.9 and temperature of 27 °C. The electrical conductor has a surface emissivity of 0.6 and dissipates 6.0 W per meter length. Assuming that the space between the two surfaces is empty, calculate the surface temperature of the conductor.
A small, oxidized, horizontal metal tube with an OD of 0.0254 m (1 in.), 0.61 m (2 ft) long, and with a surface temperature at 588 K (600°F) is in a very large furnace enclosure with fire-brick walls and the surrounding air at 1088 K (1500°F). The emissivity of the metal tube is 0.60 at 1088 K and 0.46 at 588 K. Calculate the heat transfer to the tube by radiation using SI units and AES units.
The glass surfaces are polished, having an emissivity of 0.095. The diameters of the inner and outer cylinders are 9 cm and 11 cm respectively and their length is 20 cm. The temperature of the inner and outer cylinders is 92oC and 31oC respectively. Calculate the heat transfer coefficient due to radiation through the cylindrical surface from the inner to the outer cylinder.