A well-insulated 4 × 4 × 5 m³ room, initially at 10 °C, is heated by the radiator of asteam heating system. The radiator has a fixed volume of 150 L and is initially filled withsuperheated water vapor at 200 kPa and 200 °C. After 30 minutes, the pressure of the steamis observed to drop to 100 kPa as a result of heat transfer to the room. Assume constantspecific heats for air.(a)(b)(d)Sketch a thermodynamic diagram for the process of the steam.Determine the final temperature of the steam. Based on the final state youfound, make any corrections needed to your diagram in (a).neglected.the air.Write the First Law for the air and steam, and indicate which terms can beAssuming the air has a uniform temperature, find the final temperature of

Answered: Image /qna-images/answer/faad0756-6109-48fd-b699-7bc49cf20c2e.jpg

A well-insulated 4 × 4 × 5 m³ room, initially at 10 °C, is heated by the radiator of a steam heating system. The radiator has a fixed volume of 150 L and is initially filled with superheated water vapor at 200 kPa and 200 °C. After 30 minutes, the pressure of the steam is observed to drop to 100 kPa as a result of heat transfer to the room. Assume constant specific heats for air. (a) (b) (c) (d) Sketch a thermodynamic diagram for the process of the steam. Determine the final temperature of the steam. Based on the final state you found, make any corrections needed to your diagram in (a). neglected. the air. Write the First Law for the air and steam, and indicate which terms can be Assuming the air has a uniform temperature, find the final temperature of

A well-insulated 4 × 4 × 5 m³ room, initially at 10 °C, is heated by the radiator of a steam heating system. The radiator has a fixed volume of 150 L and is initially filled with superheated water vapor at 200 kPa and 200 °C. After 30 minutes, the pressure of the steam is observed to drop to 100 kPa as a result of heat transfer to the room. Assume constant specific heats for air. (a) (b) (c) (d) Sketch a thermodynamic diagram for the process of the steam. Determine the final temperature of the steam. Based on the final state you found, make any corrections needed to your diagram in (a). neglected. the air. Write the First Law for the air and steam, and indicate which terms can be Assuming the air has a uniform temperature, find the final temperature of

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

At 645.3 kPa and 151.2°C, steam leaves an industrial boiler. When the calorimeter pressure reaches 104.3 kPa, a part of the steam is fed through a throttling calorimeter and expelled to the atmosphere. If the steam temperature at the calorimeter is 113.8°C, a. how much moisture is exiting the boiler container? b. If the mass of the saturated liquid is 15 kg, calculate the mass of the saturated vapor. @ 645.3 kPa and 151.2°C: hf = 624.56 kJ/kg hfg = 2123.3 kJ/kg @ 104.3 kPa and 113.8°C: h2 = 2506.7 kJ/kg
For an ideal gas if the specific internal energy at a specific pressure and temperature of 20 oC is u=246.9 kJ/kg, what is the specific internal energy if the pressure is doubled while the temperature stays the same.
Two identical piston-cylinder devices are each filled with 1 kg air at T = 300 K and P = 2 bar. Next, one of the gases undergoes a reversible and isothermal expansion, and the other one expands isentropically. Both of the gases stop expanding when their final volumes reach twice of their initial volumes. [5] a) Sketch both of these processes on the same T-S plot. Indicate the direction of the expansion process on the plot. (No need to express the values for T and S on the plot) [5] b) Sketch both of these processes on the same P-V plot. Indicate the direction of the expansion process on the plot. (No need to express the values for P and V on the plot) [10] c) Calculate the heat transfer between the air and the surrounding for each process separately. show possible interpolations
Calculate the compressor work in kJ required to compress 1 kg of an ideal gas from an initial volume and pressure of 0.65m3 and 101.3kpa to a final pressure of 517kpa. Compression is with n=1.35. A. 133.6 B. 105.8 C. 148.3 D. 142.7
A frictionless piston-cylinder assembly initially contains saturated liquid water at a pressure of 200 kPa. Then, 450 kJ of heat transfer occurs from a source with a temperature of 500 0C to water and some of the water evaporates at constant pressure. Show whether this state change is feasible or not by considering the increase of entropy principle.
23. A 5.2m3 tank contains nitrogen, which is evacuated from 100kPag to a pressure of 98kPagvacuum. Determine the mass of pumped out nitrogen if initially the temperature is 510K and thefinal temperature is 100K.a. 6.3274kg b. 5.8802kg c. 6.4656kg d. 6.2169kg
A sealed rigid tank is filled with 1 kg of steam at 200 °C and 10 bar. b) 0.5 kg of steam are removed from the tank. If the temperature remains at 200 °C, what is the newpressure in the tank? answer: 0.412m^3/kg c) What is the state of the steam at the end of part b (e.g., liquid, vapor, saturated, superheated)?d) How much heat must be added to bring the pressure back to 10 bar?e) What is the temperature at the end of step (d)?
A frictionless piston-cylinder assembly initially contains saturated liquid water at a pressure of 200 kPa. Then, 450 kJ of heat transfer occurs from a source with a temperature of 500 0C to water and some of the water evaporates at constant pressure. Show whether this state change is feasible or not by considering the increase of entropy principle. please solve fast
A 20 kg/s steam enters a turbine at an initial enthalpy of 2456kJ/kg and exits at 1987 kJ/kg. If the kinetic energy of the steam decreases by 10 kJ/s, how much is the turbine work? Draw a schematic diagram,andthen plot the state/s and process, whichever is applicable in a t-sdiagram
Determinethecapacityoftheheatingcoilwhen1.5m3/sofmoistairis heated from 21C db, 15C wb with a value of 20C. If the coil uses hot water and enters at 85C and exits at 75C. Determine the mass flowrate of the water
Helium gas undergoes an adiabatic process in which the Kelvin temperature doubles. By what factor does the pressure change?
Refrigerant 134a is compressed adiabatically in a piston-cylinder assembly from saturated vapor at 10 ∘∘F to a final pressure of 120 lbfin2lbfin2. Determine the minimum theoretical work input required per unit mass of refrigerant, in Btu/lb