A3-5. The soft-ride suspension system of the mountain bike is pinned at C and supported by the shock absorber BD. If it is designed to support a load P = 1500 N, determine the required minimum diameter of pins B and C. Use a factor of safety of 2 against failure. The pins are made of material having a failure shear stress of Tfail = 150 MPa, and each pin is subjected to double shear. %3D %3D

A3-5. The soft-ride suspension system of the mountain bike is pinned at C and supported by the shock absorber BD. If it is designed to support a load P = 1500 N, determine the required minimum diameter of pins B and C. Use a factor of safety of 2 against failure. The pins are made of material having a failure shear stress of Tfail = 150 MPa, and each pin is subjected to double shear. %3D %3D

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The bell-crank mechanism is in equilibrium for an applied load of F1 = 11 kN applied at A. Assume a = 250mm, b = 100mm, c = 90mm, and θ = 40°. Pin B is in a double-shear connection and has a diameter of 29 mm. The bell crank has a thickness of 31 mm. Determine the shear stress in pin B. and the the bearing stress in the bell crank at B.
The assembly is used to support the distributed load of w=500 lb/ft. determine effortnormal in bar BC and the shear stress in pins B and C. The bar has adiameter of 0.40 in. and each of the bolts has a diameter of 0.30 in. Express theanswers in ksi.
If the bolt head and the supporting bracket are made of the same material having a failure shear stress of tfail = 120 MPa, determine the maximum allowable force P that can be applied to the bolt so that it does not pullthrough the plate. Apply a factor of safety of F.S. = 2.5 against shear failure.
The bell-crank mechanism is in equilibrium for an applied load of F1 = 11 kN applied at A. Assume a = 250mm, b = 100mm, c = 90mm, and θ = 40°. Pin B is in a double-shear connection and has a diameter of 29 mm. The bell crank has a thickness of 31 mm. Determine the shear stress in pin B. Express your answer in MPa rounded to the nearest hundredths.
The bell-crank mechanism is in equilibrium for an applied load of F1 = 16 kN applied at A. Assume a = 330mm, b = 170mm, c = 75mm, and θ = 50°. Pin B is in a double-shear connection and has a diameter of 23 mm. The bell crank has a thickness of 35 mm. Determine(a) the shear stress in pin B.(b) the bearing stress in the bell crank at B.
Before the load is placed on the rigid plate, the top of the central spring is 20 mm lower than the outer springs. Each outer spring is made of 24 turns of 15-mm diameter wire on a mean radius of 60 mm. The central spring consists of 16 turns of 20 mm dimeter wire on a mean radius of 80 mm. If a load P = 5 kN is now placed on the rigid plate. Disregarding the weight of the plate, use G = 83 GPa and use Light spring formula. Determine the maximum shearing stress of the in uter spring. In MPa
The spring mechanism is used as a shock absorber for a load applied to the drawbar AB. Determine the force in each spring when the 50-kN force is applied. Each spring is originally unstretched and the drawbar slides along the smooth guide posts CG and EF. The ends of all springs are attached to their respective members. Also, what is the required diameter of the shank of bolts CG and EF if the allowable stress for the bolts is sallow = 150 MPa?
If the roller at A and the pin at B cansupport a load up to 4 kN and 8 kN,respectively, determine the maximumintensity of the distributed load w, measuredin kN/m, so that failure of the supports doesnot occur.
In the next column, determine a) the eccentricity e of the load, b) the maximum stress in the column. P = 480 N (I will rate it)
The coupling rod is subjected to a force of 5 kip. Determine the distance d between C and E accounting for the compression of the spring and the deformation of the bolts. When no load is applied the spring is unstretched and d = 10 in. The material is A-36 steel and each bolt has a diameter of 0.25 in. The plates at A, B, and C are rigid and the spring has a stiffness of k = 12 kip>in.
The hanger is supported using a rectangular pin. Determine the magnitude of the allowable suspended load P if the allowable bearing stress is (σb)allow=220 MPa, the allowable tensile stress is (σt)allow=150 MPa, and the allowable shear stress is τallow=130 MPa. Take t=6 mm, a=5 mm, and b=25 mm. draw free-body diagram
The horizontal bar shown is pinned at O and is supported with a helical springat L1 from O. L1=2m, L2=1m. The spring has 30 turns and the diameter of the wire usedis 20mm. The diameter of the spring is 125mm. Modulus of Rigidity = 83GPa. Determine the shear stress of the helical spring loaded as shown if w = 25kN/m.