I need the answer as soon as possible AŁa certain Roint in a so% reactionturbine, the Heam leaving a movingbladerow is atthe steam fho sate s 7Kg/s audturbinespeed is 3000 rpm.|os base O.90 dry!theAt entrythe axialvelocityis 0.7 times andat exit fom themean blade velocity- the exitaugles of bot fixed and Movingblades are20; Measused forom thelave of rotatonf Moving bladesthe mean diameter.the Loight of the Moving bladesaf, exifin the blade row.to the moving blade lowrow Do7S timmesthegond„the heightat exit is 40 ofDeternineand' the power dficloped

Turbines are power producing devices that convert hydraulic energy into mechanical energy. On the…

AŁa certain Roint in a so% reaction turbine, the tteam leauing a moving blade the steamfloo sate s 7Kg/s aid turbine row is at |os base O.90 dry! the speed is 3000 rpm: At entry te the moving blade lows the axial velocityis at exit fom the. meah blade velocityr the exit augles of both fixed andMoving blades are 20; Measured from the 0.7 times. and Do7S times the row plave g and of Moving blades the Mean diametr. the Loight af,ext of rotation the height at exit is 4o of Detersine fthe blades Moving and' the poweer dhieloped flade row. in the

AŁa certain Roint in a so% reaction turbine, the tteam leauing a moving blade the steamfloo sate s 7Kg/s aid turbine row is at |os base O.90 dry! the speed is 3000 rpm: At entry te the moving blade lows the axial velocityis at exit fom the. meah blade velocityr the exit augles of both fixed andMoving blades are 20; Measured from the 0.7 times. and Do7S times the row plave g and of Moving blades the Mean diametr. the Loight af,ext of rotation the height at exit is 4o of Detersine fthe blades Moving and' the poweer dhieloped flade row. in the

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

To avoid the bulky tower and impeller and generator inthe HAWT of the chapter-opener photo, we could insteadbuild a number of Darrieus turbines of height 4 m anddiameter 3 m. (a) How many of these would we need tomatch the HAWT’s 100 kW output for 15 m/s wind speedand maximum power? (b) How fast would they rotate?Assume the area swept out by a Darrieus turbine is twothirdsthe height times the diameter.
The air temperature is 288K and the pressure is 1 atm upstream of a shock wave; After the passing through the shock wave, the temperature of the air is 690K and the pressure is 8.656 atm. Calculate the change in a) enthalpy b) internal energy, and c) entropy across the wave. Assume R = 0.287 kJ/kg⋅K and ? = 1.4
Air enters through a duct of a fan with a velocity of 4m/s and an inlet pressure of2cm of water less than atmospheric pressure. The air leaves the fan through aduct at a velocity of 12m/s and a discharge static pressure of 8cm of waterabove atmospheric pressure. If the specific weight of air is 1.2kg/m3 and the fandelivers1 2m3/s, what is the fan input power to the motor if the fan has amechanical efficiency of 70% and motor efficiency of 80%.
A supply tank at 500 kPa and 400 K feeds air to a converging–diverging nozzle whose throat area is 9 cm2. The exit areais 46 cm2. State the conditions in the nozzle if the pressureoutside the exit plane is (a) 400 kPa, (b) 120 kPa, and (c) 9kPa. (d ) In each of these cases, fi nd the mass fl ow.
A pump draws water from a 20 cm diam suction pipe and discharges through a15 cm diam pipe in which the velocity is 3.60 m/s. The pressure is – 34. 465 kPaat A in the suction pipe. The 15 cm diam pipe discharges horizontally into air atC. To what height h above B can the water be raised if B is 1.8 m. above A and20 hp is delivered to the pump? Assume that the pump operates at 80 %efficiency and that the frictional loss in the pipe between A and C is 3 m. Determine the inclination angle at point C for the water stream to reach a range of 10 m. Calculate the maximum height that the water can go from the selected datum plane.
A fluid moves in a steady flow manner between two sections in a flow line. At the entrance section: A1, =1 m2, v1= 0.5 m/s, ρ1 = 4 kgm/m3. At the exit section: A2 =0. 2 m2, ? 2 = 0.20 m3/kgm. Calculate (a) the mass flow rate in kg/s and (b) the speed at section 2 in m/s.
Air flows steadily through a converging-diverging nozzle a mass flow rate of 3.00kg/s. The air enters the duct at a pressure of 1400kPa and a temperature of 200°C with a low velocity, and it expands in the nozzle to an exit pressure of 92kPa. The duct is designed so that the flow can be approximated as isentropic. Nozzle throat area must be ______ to sustain the flow.
Gas turbine operates with air. At the initial state the air has pressure of 1.3 MPa and temperature 773K, after the expansion, the air has pressure of 100 kPa and is at temperature 120C. The cross-sectional area of a turbine changes from 0.2 m2 to 1m2 respectively. Knowing that the initial velocity of air is 40 m/s, determine: a. mass flow rate. Use tables as needed. b. power generated by the turbine. Use tables as needed.
The converging-diverging nozzle of the engine of a new supersonic unmanned aerial vehicle (UAV) has an exit area of 50 cm^2 . At the design operating condition, the mass flow rate of exhaust gases (? ≈ 1.4, molecular weight = 26 g/mol) is 1.75 kg/s. The exhaust gases enter the nozzle with stagnation pressure and temperature equal to Po = 300 kPa and To = 500 K, respectively a) What is the optimal cruising altitude for the operation of the nozzle of this UAV? (b) What is the lowest altitude at which the plane can fly such that the flow inside the diverging part of the nozzle is kept supersonic? Note: - Assume that the stagnation conditions of the flow of exhaust gases entering the nozzle are kept constant with varying altitude
A horizontal axis wind turbine with a 35-m diameter rotor is 40% efficient at 7.5 m/s winds and at 1 atm of pressure and 15° C. (a) How much power would it produce at these conditions? (b) What would the air density be on the peak of Mount Robson in the Rainbow Range which has an elevation of 3954 m at -8.5° C? (c) Determine the power the wind turbine would produce on the mountain with the same wind speed. Assume that the efficiency of the turbine is not affected by density and the coefficient of friction is the same at both altitudes. Is it beneficial to build the turbine on top of this mountain?
When you inhale, air flows through theturbinate bones of your nasal passagesas shown. Assume that for a shortlength of 15 mm, the flow is passingthrough parallel plates, the plateshaving a total mean width of w = 20 mmand spacing of a = 1 mm. If the lungsproduce a pressure drop of ∆p = 50 Pa, and the air has a temperature of 20° C,determine the power needed to inhale air. At T = 20° C, ρa = 1.202 kg/m3 and µa =18.1(10-6) N.s/m2.
Atmospheric air at 101kPa and 20OC is drawn isentropically through a convergent–divergent nozzle of exit area 0.033m2. If the pressure at the nozzle exit is 32kPa, the maximum mass flow rate through the nozzle is ________