An airplane is cruising at a velocity of 950 km/h in air whose density is 0.526 kg/m3. The airplane has a wing planform area of 90 m2. The lift and drag coefficients on cruising conditions are estimated to be 2.0 and 0.06, respectively. The power that needs to be supplied to provide enough trust to overcome wing drag is (a) 21,500 kW (b) 19,300 kW (c) 23,600 kW (d ) 25,200 kW (e) 26,100 kW

An airplane is cruising at a velocity of 950 km/h in air whose density is 0.526 kg/m3. The airplane has a wing planform area of 90 m2. The lift and drag coefficients on cruising conditions are estimated to be 2.0 and 0.06, respectively. The power that needs to be supplied to provide enough trust to overcome wing drag is (a) 21,500 kW (b) 19,300 kW (c) 23,600 kW (d ) 25,200 kW (e) 26,100 kW

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter5: Analysis Of Convection Heat Transfer

Section: Chapter Questions

Problem 5.49P

See similar textbooks

Similar questions

To reduce the drag coefficient and thus to improve the fuel efficiency, the frontal area of a car is to be reduced. Determine the amount of fuel and money saved per year as a result of reducing the frontal area from 20 to 13 ft2. Assume the car is driven 12,000 mi a year at an average speed of 55 mi/h. Take the density and price of gasoline to be 50 lbm/ft3 and $3.10/gal, respectively; the density of air to be 0.075 lbm/ft3, the heating value of gasoline to be 20,000 Btu/lbm; and the overall efficiency of the drive train to be 30 percent.
To reduce the drag coefficient and thus to improve the fuel efficiency, the frontal area of a car is to be reduced. Determine the amount of fuel and money saved per year as a result of reducing the frontal area from 17 to 14 ft2. Assume the car is driven 10,000 mi a year at an average speed of 55 mi/h. Take the density and price of gasoline to be 50 lbm/ft3 and $3.10/gal, respectively; the density of air to be 0.075 lbm/ft3; the heating value of gasoline to be 20,000 Btu/lbm; and the overall efficiency of the engine to be 30%.
To reduce the drag coefficient and thus to improve the fuel efficiency, the frontal area of a car is to be reduced. Determine the amount of fuel and money saved per year as a result of reducing the frontal area from 18 to 15 ft2. Assume the car is driven 12,000 mi a year at an average speed of 55 mi/h. Take the density and price of gasoline to be 50 lbm/ft3 and $3.10/gal, respectively; the density of air to be 0.075 lbm/ft3; the heating value of gasoline to be 20,000 Btu/lbm; and the overall efficiency of the engine to be 30 percent.
A commercial airplane has a total mass of 70,000 kg and a wing planform area of 150 m2. The plane has a cruising speed of 558 km/h and a cruising altitude of 12,000 m, where the air density is 0.312 kg/m3. The plane has double-slotted flaps for use during takeoff and landing, but it cruises with all flaps retracted. Assuming the lift and the drag characteristics of the wings can be approximated by NACA 23012 , determine (a) the minimum safe speed for takeoff and landing with and without extending the flaps, (b) the angle of attack to cruise steadily at the cruising altitude, and (c) the power that needs to be supplied to provide enough thrust to overcome wing drag.
A commercial airplane has a total mass of 150,000 lbm and a wing planform area of 1700 ft2. The plane has a cruising speed of 625 mi/h and a cruising altitude of 38,000 ft where the air density is 0.0208 lbm/ft3. The plane has double-slotted flaps for use during takeoff and landing, but it cruises with all flaps retracted. Assuming the lift and drag characteristics of the wings can be approximated by NACA 23012, determine (a) the minimum safe speed for takeoff and landing with and without extending the flaps, (b) the angle of attack to cruise steadily at the cruising altitude, and (c) the power that needs to be supplied to provide enough thrust to overcome drag. Take the air density on the ground to be 0.075 lbm/ft3.
A 17,000-kg tractor-trailer rig has a frontal area of 9.2 m2, a drag coefficient of 0.96, a rolling resistance coefficient of 0.05 (multiplying the weight of a vehicle by the rolling resistance coefficient gives the rolling resistance), a bearing friction resistance of 350 N, and a maximum speed of 110 km/h on a level road during steady cruising in calm weather with an air density of 1.25 kg/m3. Now a fairing is installed to the front of the rig to suppress separation and to streamline the flow to the top surface, and the drag coefficient is reduced to 0.76. Determine the maximum speed of the rig with the fairing.
How does a winglet on the wing tip reduce induced drag? Which drag is higher if an aircraft is flying at 100knts and the L/Dmax is 120knts? How do you know this?
The power delivered to the wheels of a car is used to overcome aerodynamic drag. Compare the amount of annual fuel consumption by the car when driving a distance of 24,000 km/year with velocities of 60, 100 and 140 km/h. The drag coefficient and frontal area of the car body are 0.26 and 1.8 m2 and the engine efficiency is 30%. Take the density of air and gasoline as 1.2 and 750 kg/m3. The heating value of gasoline is also 44,000 kJ/kg.
, A small aircraft has a wing area of 40 m2a lift coefficient of 0.45 at takeoff settings, and a total mass of 4000 kg. Determine (a) the takeoff speed of this aircraft at sea level at standard atmospheric conditions, (b) the wing loading, and (c) the required power to maintain a constant cruising speed of 360 km/h for a cruising drag coefficient of 0.035.
An airplane has a mass of 50,000 kg (without load), a wing area of 360 m2 , a maximum lift coefficient of 3.25, and a cruising drag coefficient of 0.03 at an altitude of 12,000 m. Taking the density of standard air as ρ1 = 1.225 kg/m3 at sea level and ρ2 = 0.312 kg/m3 at 12,000 m altitude. (a) Generate a plot of the safe takeoff speed at sea level Vs the load carried by airplane (ranging from 0 kg to 20,000 kg of load). (b) Determine the power that must be delivered by the engines for a cruising speed of 800 km/hr.
A shuttlecock is launched from the ground with an initial speed of 36.9838 m/s at an angle of 9.9728 degrees with respect to the horizontal. The shuttlecock experiences air resistance with a drag coefficient of 0.1967 in an environment where the air density is 0.7584 kg/m3. If the shuttlecock has a radius of 3.4 cm and a mass of 5.2 grams, what is the maximum height reached by the shuttlecock? Assume that the experiment is done near the surface of the earth.
An airplane has a total mass of 35,000 kg and a wing planform area of 65 m2. The airplane is cruising at 10,000 m altitude with a velocity of 1100 km/h. The density of air on cruising altitude is 0.414 kg/m3. The lift coefficient of this airplane at the cruising altitude is (a) 0.273 (b) 0.290 (c) 0.456 (d ) 0.874 (e) 1.22