An aluminum calorimeter with a mass of 100 g contains 250 g of water. The calorimeter and water are in thermal equilibrium at 10.0°C. Two metallic blocks are placed into the water. One is a 50.0-g piece of copper at 80.0°C. The other has a mass of 70.0 g and is originally at a temperature of 100°C. The entire system stabilizes at a final temperature of 20.0°C. Determine the specific heat of the unknown sample and Using the data in Table of constants, identify of the unknown material?

An aluminum calorimeter with a mass of 100 g contains 250 g of water. The calorimeter and water are in thermal equilibrium at 10.0°C. Two metallic blocks are placed into the water. One is a 50.0-g piece of copper at 80.0°C. The other has a mass of 70.0 g and is originally at a temperature of 100°C. The entire system stabilizes at a final temperature of 20.0°C. Determine the specific heat of the unknown sample and Using the data in Table of constants, identify of the unknown material?

Physics for Scientists and Engineers: Foundations and Connections

1st Edition

ISBN:9781133939146

Author:Katz, Debora M.

Publisher:Katz, Debora M.

Chapter21: Heat And The First Law Of Thermodynamics

Section: Chapter Questions

Problem 68PQ

See similar textbooks

Similar questions

A well-insulated styrofoam bucket contains 146 g of ice at 0 °C. If 20 g of steam at 100 °C is injected into the bucket,what is the final equilibrium temperature of the system?(c water=4186 J/kg.°C, Lf= 3.35*10 ^5 J/kg, Lv=2.26*10^6 J/kg)
A copper calorimeter with mass 100g contains 160g of water and 18g of ice in thermal equilibrium. If you drop a 0.75 kg block of lead at 2500C into the calorimeter, what would be the final temperature? Assume no heat is lost to the surroundings. Specific heat of lead is 128 J/kg.K. Specific heat of copper is 386 J/kg.K. a) 0 0C b) 20.40C c) 21.40C
How much heat is removed from the body when 300-g ice from an ice pack melted and the water inside had a temperature of 25°C? a. 3135 J b. 31 350 J c. 100 080 J d. 131 430 J In what conditions will vaporization best occur? a. low kinetic energy, strong molecular forces, and large surface area b. high kinetic energy, weak molecular forces, and large surface area c. low kinetic energy, low molar mass, and small surface area d. high kinetic energy, high molar mass, and large surface area Assuming all substances are at room temperature, choose the liquid having a vapor pressure between higher a. mercury and water b. condensed milk and evaporated milk c. acetone and honey d. motor oil and gasolinens
A thirsty nurse cools a 2.30 LL bottle of a soft drink (mostly water) by pouring it into a large aluminum mug of mass 0.257 kgkg and adding 0.123 kgkg of ice initially at -14.0 ∘C∘C. If the soft drink and mug are initially at 20.9 ∘C∘C, what is the final temperature of the system, assuming no heat losses?
The exhaust duct from a heater has an inside diameter of 114.3 mm with ceramic walls 6.4 mm thick. The average k = 1.52 W/mK. Outside this wall, an insulation of rock wool 102 mm thick is installed. The thermal conductivity of the rock wool is k = 0.046+1.56*10-4T (°C) (W/mK). The inside surface temperature of the ceramic is T1= 588.7 K, and the outside surface temperature of the insulation is T3= 311 K. Calculate the heat loss for 1.5 m of duct and the interface temperature T2between the ceramic and the insulation.Assumesteady heat transfer.Hint: The correct value of km for insulation is that evaluated at the mean temperature of T2+T3/2. Hence, for the first trial assume a mean temperature of, say, 448 K. Then, calculate the heat loss and T2. Using this new T2, calculate a new mean temperature and proceed as before.
600g of ice at -8°C is put inside a calorimeter filled with 4000 g water initially at 20 °C. What is the final temperature of the system? c water = 4.186 J/g°C c of ice = 2.093 J/g°C Hf = 334 J/g
A. 1 kg of ice at 0°C is mixed with 3 kg of steam at 100°C in a thermally isolated container and allowed to reach thermal equilibrium. What is the final temperature of the resulting mixture? The latent heat of fusion is 80 cal/g and the latent heat of vaporization is 540 cal/g. The specific heat of water is 1.00 cal/g · K. The specific heat of both ice and steam is 0.5 cal/g · K° B. A skater spins with constant angular acceleration from rest to a final angular speed of 10.0 rev/s in 6.00 seconds. How many revolutions did she make in the first 6.00 seconds? C. A particle exhibiting simple harmonic motion has a velocity v(t) = 200 sin(50t) where v is in m/s. Its maximum velocity in m/s is _______. D. A container has 0.50 kg of ice at 0.00°C. A tube connected from a boiler et 0.100 kg of steam at 100.0°C inside the container. What is the temperature of the system when it has reached equilibrium? Assume that no heat is absorbed by the container.
Water with a mass of mW = 0.400 kg and temperature of TW = 15.5°C is poured into an insulated bucket containing mI = 0.19 kg of ice at a temperature of TI = -15°C. Assume the specific heats of ice and water are constant at cI = 2.10×103 J/(kg⋅°C) and cW = 4.19×103 J/(kg⋅°C), respectively. The latent heat of fusion for water is Lf = 334×103 J/kg. Part (a) What is the final temperature of the mixture, in degrees Celsius? Tfinal = Part (b) Enter an expression for the mass of ice, in kilograms, that has melted when the mixture reaches its final temperature. mmelt = Part (c) Calculate how much ice, in kilograms, has melted when the mixture reaches its final temperature. mmelt =
The value of specific heat for copper is 390 J/kgC for aluminum is 900 J/kgC and for water is 4186 J/kgC. What will be the equilibrium temperature when a 265g block of copper at 255 degrees Celsius is placed in a 155 g aluminum calorimeter cup containing 845 g of water at 14
A 50-g cube of ice, initially at 0.0°C, is dropped into 200 g of water in an 80-g aluminum container, both initially at 30°C. What is the final equilibrium temperature in Kelvin? (Specific heat for aluminum is 900 J/kg×C°, the specific heat of water is 4 186 J/kg×C°, and Lf = 3.33×10 5 J/kg.)
Hydrogen gas is enclosed in a chamber at 200 degrees C and a volume of 0.0250 m3. Initially, the pressure in the gas is 1.50 x 106 Pa. The chamber is removed from the heat source and allowed to cool until the pressure in the gas falls to 0.950 x 106 Pa. What is T2?
Equal 0.4 kg masses of lead and tin at 60.0°C are placed in 1.0 kg of water at 20.0°C. cSn = 227 J/ kg ⋅°C ; cPb = 128 J/kg ⋅°C (a) What is the equilibrium temperature of the system? (b) If an alloy is made of half lead and half tin by mass, calculate specific heat of the alloy? (c) How many atoms of tin NSn are in 0.4 kg of tin, and how many atoms of lead NPb are in 0.4 kg of lead? (MSn = 118.7 g/mol ; MPb = 207.2 g/mol) (d)Divide the number NSn of tin atoms by the number NPb of lead atoms and compare this ratio with the specific heat of tin divided by the specific heat of lead. What conclusion can be drawn?