11 An antenna has a noise temperature T = 4° K. It is%3Dantconnected to a receiver which has an equivalent noisetemperature T, = 100° K , the mid-band gain of theereceiver is gao= 1010 , and can be represented by a RClowpass filter having a 3-dB bandwidth of 10MHZ.FindNoise band of the receiver Byi)ii)The available output noise power

Answered: Image /qna-images/answer/04b67850-73e2-4a70-bfef-c9ddca9df94d.jpg

An antenna has a noise temperature Tmt = 4° K . It is connected to a receiver which has an equivalent noise temperature T = 100° K , the mid-band gain of the %3D receiver is g, = 1010 , and can be represented by a RC lowpass filter having a 3-dB bandwidth of 10MHZ. Find

An antenna has a noise temperature Tmt = 4° K . It is connected to a receiver which has an equivalent noise temperature T = 100° K , the mid-band gain of the %3D receiver is g, = 1010 , and can be represented by a RC lowpass filter having a 3-dB bandwidth of 10MHZ. Find

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Related questions

Q: Determine the carrier to noise ratio for a receiver with a receive power value of -80dBW, the…

A: Given

Q: An angle-modulated by the equation: QFM(t) = 10 cos (Oct + 2 sin 2000лt). a) Write expressions for…

A: Only one frequency component of the baseband or message signal is used in single-tone modulation.…

Q: 2.10. In target-search ground-mapping radars it is desirable to have echo power received from a…

Q: A transmitter has a power of 207 mW and transmits at 2.4 GHz to a receiver at the distance of 101…

A: The solution is given below

Q: A communication system uses a superheterodyne receiver with an intermediate frequency of 10.7 MHz.…

A: we need to find out the center frequency of an image station.

Q: 6.13. Design an ordinary end-fire uniform linear array with only one maximum so that its directivity…

A: “Since you have posted a question with multiple sub-parts, we will solve first three subparts for…

Q: The RF amplifier of a receiver has an input resistance of 1000 Q, and equivalent shot noise…

A: RF amplifiers provide the amplification that is needed when the signal received by the antenna is…

Q: Practically, the de-emphasis filter in an FM receiver unit is often a simple resistance-capacitance…

A: THIS Question is from Communication System.

Q: Use the free space model and the following equation to compute the received power in dBm for a 900…

A: We will use free space equation to solve the given problem .

Q: The gap between two neighboring spectral components in a sampled signal exist if we choose sampling…

A: The gap between two neighbouring spectral components in a sampled signal exist if we choose samfling…

Q: An air-filled resonant cavity with dimensions a = 5 cm, b = 4 cm, and c = 10 cm is made of copper…

A: Wave is function of space and time. The mode at which waveguide have lowest frequency is said to be…

Q: Using the MATLAB platform, Write a program to plot the given signal array…

A: Given array=[4,8,12,7,-2,6,4,5,0,-1,1,3]

Q: An antenna has a gain that is 19 times better than an isotropic antenna. Calculate the gain of this…

A: Given information: The gain of the antenna under test is 19 time more than the gain of an isotropic…

Q: Practically, the de-emphasis filter in an FM receiver unit is often a simple resistance-capacitance…

Q: A) The effective aperture of a 144.0cm-diameter parabolic reflector antenna is 6m of the physical…

Q: nsider an ideal low-pass filtered white noise process, n(t), whose auto-correlation function T) and…

Q: In target-search ground-mapping radars it is desirable to have echo power received from a target, of…

Q: -The modulating signal into an FM modulator is m(t) = 2 cos(16nt) and the carrier is c(t) = 12…

Q: A rectangular waveguide with dimensions a = 2.5 cm, b = 1 cm is to operate below Calculate the…

A: Wave is function of space and time. The mode at which waveguide have lowest frequency is said to be…

Q: The equivalent circuit of an amplifier circuit is shown below. Assuming Cx and C, represent…

A: "According to the company's policy, we will provide solution for first three parts of the question,…

Q: For an FM receiver with 200-kHz bandwidth, noise figure is 8 dB, and input noise temperature is 100…

A: Given data, Bandwidth=200 kHzN.F=8 dBSNi/p=40 dB

Q: b. An antenna having an effective temperature 15K is fed into a microwave amplifier that has an…

A: The noise power per unit bandwidth is proportional to the object's temperature and is given by…

Q: A transmitting antenna, Tx and a receiving antenna, Rx are separated by d=1.25 km. The efficiency…

A: Given : Transmitting antenna and receiving antenna are separated by distance d=1.25 kmEfficiency of…

Q: Consider a receiving antenna with a ground value of 20 dB and an equivalent noise temperature of…

A: In this question, We need to choose the correct options Here Antenna Gain = 20dB Equivalent noise…

Q: An angle-modulated signal with carrier frequency we = 2n x 106 and the modulating signal =…

Q: A rectangular guide with dimensions of 5.7cmX2.524cm has air as its dielectric and operates at a…

A: According to the question, for the given rectangular waveguide with the dimension of 5.7 cm * 2.524…

Q: Use the radar equation from Chapter 2 to solve the following problem. For a radar with a 100 kW peak…

A: Given data,Transmitter peak power (Pt) =100 kWAntenna gain = 30dBNoise figure = 4dBLosses =…

Q: For an AM commercial broadcast band receiver (535 kHz to 1605 kHz) with an input filter Q-factor of…

Q: Using a 15-k(ohm) resistance, design an RC high-pass filter with a breakpoint at 200-kHz.

A: Breakpoint frequency for RC high-pass filter is given by: fc=12πRC Given:fc=200 kHzR=15 kΩNow…

Q: Assignment-2 Q1. Derive an expression for the input impedance of the equivalent network for the…

A: Given f=500MHz R=0.5 Ohm L=15nH c=1 pF Need to find the input impedence Given circuit . Resonant…

Q: a=2.286 cm and b=1.016 cm. Find the cutoff frequencies of the first four propagating modes. What is…

A: Please find your answer below in step 2

Q: Q5. A station started broadcasting on the commercial AM system with the frequency 620 kHz, while a…

Q: 3. Sketch FM for the following modulating signals m(t). The frequency conversion factor is 10° and…

A: According to the question,

Q: 3. The radiation resistance of an antenna 72 ohms, loss resistance is 8 ohms .What is the…

Q: Q4) Two different (i.e. physically independent) band-limited analog message signals both having 10…

Q: Q5] In target-search ground-mapping radars it is desirable to have echo power received from a…

A: The desirable intensity radiation intensity of the antenna in silicon as follows : V(θ,∅) = 1,…

Q: A satellite at an altitude of 37654 km transmits a signal of 17 GHz to a ground station directly…

A: A satellite transmits a signal to a ground station directly below it. The following data is given:…

Q: Design a rectangular microstrip patch antenna, based on the dominant mode, that can be mounted on…

Q: Tuned Circuit Design Using a VARICAP (a) Refer to the capacitance curves for the Motorola…

A: Solution- The given operating frequency is 103.3MHz.

Q: An air-filled cubic cavity made of Copper (conductivity: 5.8x10 S/m) has fn01 = 10 GHz. What is the…

A: Given, an air filled cubic cavity made of copper having Conductivity, σ = 5.8×107 S/m fr101=10 GHz

Q: 3.4 A DBS-TV receiving antenna has a circular aperture with a diameter of 0.6 m and operates at a…

A: As per our company guidelines, we are supposed to answer only the first 3 sub-parts. Kindly repost…

Q: A receiver consists of an antenna with a noise temperature equal to 120 K that feeds an attenuator…

Q: Establish the relation between dB and dBm while measuring the power of an antenna.

A: The dBm is a logarithmic unit of power and it stands for power in decibels when the reference power…

Q: In a link budget calculation at 12 GHz, the free space loss is 206 dB, the APL is 1 dB, AA is 2 dB.…

A: The losses are given as follows- Losses=Free space loss+RFL+APL+AA+PL =206+1+1+2…

Q: Assignment-2 Q1. Derive an expression for the input impedance of the equivalent network for the…

Q: A receiver consists of an antenna with a noise temperature equal to 120 K that feeds an attenuator…

A: The temperature of a resistance that would produce the same noise power at the output of an ideal…

Q: 11 0.9 0.8 0.7 与 0.6 0.5 0.4 0.3 0.2 0.1 10 /11 12 0.1 0.2 0.3 0.4 0.5 A carrier (fc = 100MHZ, A̟ =…

Q: A lossless resonant half-wavelength dipole antenna, with input impedance of 73 ohms, is connected to…

A: Input Impendence =73 ohms, Characteristics impendence =50 ohms. Umax= Bo

Q: i) A communication system employs a continuous source. The channel noise is white and Gaussian. The…

A: Given that Bandwidth, W= 10 MHz Signal to noise power ratio, S/N=100 We have to find channel…

Question

An antenna has a noise temperature T = 4° K. It is
%3D
ant
connected to a receiver which has an equivalent noise
temperature T, = 100° K , the mid-band gain of the
e
receiver is gao
= 1010 , and can be represented by a RC
lowpass filter having a 3-dB bandwidth of 10MHZ.
Find
Noise band of the receiver By
i)
ii)
The available output noise power

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step 3

VIEW

Step by step

Solved in 3 steps with 3 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, electrical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A receiver consists of an antenna with a noise temperature equal to 120 K that feeds an attenuator with a physical temperature of 200 K and a loss of 3 dB. The attenuator feeds an amplifier with an effective noise temperature of 150 K, a noise bandwidth of 20 MHz, and a power gain of 50 dB. What is the total noise power available at the output of the attenuator (within the specified noise bandwidth)?
Design a rectangular microstrip patch antenna, based on the dominant mode, that can be mounted on the roof of a car to be used for satellite cellular telephone. The designed center frequency is 1.6 GHz, the dielectric constant of the substrate is 10.2 (i.e., RT/duroid), and the thickness of the substrate is 0.127 cm. Determine the (a) dimensions of the rectangular patch (in cm) (b) resonant input impedance, assuming no coupling between the two radiating slots (c) mutual conductance between the two radiating slots of the patch (d) resonant input impedance, taking into account coupling (e) position of the feed to match the patch antenna to a 75-ohm line
Answer the Following and provide solution. 1. The maximum frequency deviation of the carrier is ± 15 kHz and the maximum modulating frequency is 3 kHz, calculate for the modulation index. 2. Assume that the 60-dB bandwidth of a receiver is 12 kHz and the 6-dB bandwidth is 7 kHz. What is the shape factor of the circuit? 3. What is the bandwidth of a receiver with a quality factor of 50 and a resonance frequency of 540 kHz. 4. What is the maximum bandwidth of an FM signal with a deviation of 27 kHz and a maximum modulating signal of 4 kHz as determined by Carson’s rule? 5. A PM signal has a maximum allowed deviation of 17 kHz and an actual deviation of 8 kHz. What is the percentage modulation?
A digital radio communication system receives a signal with signal power Sof 3 µW, and noise level of 200 nW, on a radio channel with upper cut-offfrequency of 2.42 GHz, and a lower cut-of frequency of 2.40GHz. . What is the signal Bandwidth in Hertz?
A rectangular guide with dimensions of 5.7cmX2.524cm has air as its dielectric and operates at a frequency of 4.21GHz. Get The first 4 cut-off frequencies of the TE modes and the first of the TM modes (in GHz),phase constant in TE10 mode guide (in rad / m),phase velocity in TE10 mode guide (in Mm / s),
Consider a receiving antenna with a ground value of 20 dB and an equivalent noise temperature of 12dBK, the G/T factor will be: Select one: A. The value is 32dB/K b. The value is 8dB/K c. None of the results is correct d The value is -8db/K
What is the minimum sensitivity necessary for a receiver with a noise figure of 5 dB, aSNR of 11 dB, and a bandwidth of 10 MHz to achieve a 10^-5 BER?
A communication system uses a superheterodyne receiver with an intermediate frequency of 10.7 MHz. Suppose the receiver is to receive a transmitted signal with a center frequency of 89.7 MHz. Find the center frequency of an image station that must be rejected by the tunable bandpass filter in the superheterodyne receiver.
Practically, the de-emphasis filter in an FM receiver unit is often a simple resistance-capacitance (RC) circuit with transfer function. Hde(f)=1/(1+j2πfRC) i) Determine the 3-dB bandwidth and equivalent bandwidth. ii) Presume the modulating signal has bandwidth W, the carrier amplitude is A, and the single-sided power spectral density of the white Gaussian noise is N0. Solve for the noise power at the output of the de-emphasis filter circuit. iii) Find the noise power without the de-emphasis filter. iiii) Supposing RC = 6 × 10−5, and W = 15 kHz. Calculate the improvement in the output signal-to-noise ratio (SNR) provided by the de-emphasis filter. Express it in decibel (dB).
A transmitter has a power of 207 mW and transmits at 2.4 GHz to a receiver at the distance of 101 meters. Cable loss is 3 dB and antenna gain is 3 dBi on both TX and RX sides. On the receiver side, we measure a total noise power of -91 dBm. What is the SNR in dB at the receiver? Calculate up to 1 decimal point. Hint: SNR(db)=RSSI-Noise power
1. Which system has the best projected BER? 2. An earth station satellite transmitter has an HPA with a rated saturated output power of 10,000 W. The back-off ratio is 6 dB, the branching loss is 2 dB, the feeder loss is 4 dB, and the antenna gain is 40 dB. Determine the actual radiated power and the EIRP.
You have an FSK transmitter using a mark frequency of 500 kHz, a space frequency of 380 kHz, and sending 10 kbps. A) How much bandwidth do you need for your transmission? B) if you are to design the system with continuous phase shift keying in mind, what would be the value of the space frequency if the mark frequency remains the same?