An automobile engine has a valve spring is to be made of Fe, C, & Mn, to be oil-tempered, & to bedesigned that should not exceed to a cylindrical space of 134-in in diameter. The spring index should be6.0, the coil-to-coil distance of 0.33in, & the maximum load it will sustain is 100lb with the correspondingcompression of ½/2-in. The spring is subjected to repeated loading & fatigue must be considered by a factorof safety of 2.25. Determine:(a) the diameter of wire based on commercial sizes;(b) the total number of coils;(c) the free length of the spring.Sample image of valve spring in an assembly.

Answered: Image /qna-images/answer/bb6dbdc5-091f-465a-b542-03900c81fe7c.jpg

An automobile engine has a valve spring is to be made of Fe, C, & Mn, to be oil-tempered, & to be designed that should not exceed to a cylindrical space of 1%-in in diameter. The spring index should be 6.0, the coil-to-coil distance of 0.33 in, & the maximum load it will sustain is 100lb with the corresponding compression of 1/2-in. The spring is subjected to repeated loading & fatigue must be considered by a factor of safety of 2.25. Determine: (a) the diameter of wire based on commercial sizes; (b) the total number of coils; (c) the free length of the spring.

An automobile engine has a valve spring is to be made of Fe, C, & Mn, to be oil-tempered, & to be designed that should not exceed to a cylindrical space of 1%-in in diameter. The spring index should be 6.0, the coil-to-coil distance of 0.33 in, & the maximum load it will sustain is 100lb with the corresponding compression of 1/2-in. The spring is subjected to repeated loading & fatigue must be considered by a factor of safety of 2.25. Determine: (a) the diameter of wire based on commercial sizes; (b) the total number of coils; (c) the free length of the spring.

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter2: Axially Loaded Members

Section: Chapter Questions

Problem 2.2.11P: A small lab scale has a rigid L-shaped frame ABC consisting of a horizontal arm AB (length b = 10...

See similar textbooks

Similar questions

A helical compression spring has a scale of 400 lb/inch, an inside diameter of 2.5 inches, a free length of 8 inches and with squared and ground ends. Material is to be chrome vanadium steel. For a load, P, of 750 pounds, and for average service, determine the solid height. Working stress is 63 ksi, G = 10,800 ksi.
A typical compound helical spring consists of two coaxial closed coil spring having the following particulars: Outer spring 1: mean coil diameter = 100 mm Wire diameter = 12.5 mm No. of turns = 15 Inner spring 2: mean coil diameter = 75 mm No. of turns = 20Both the springs are of equal initial length when unloaded. Ifthe working stress for each spring is to be same. The modulus of rigidity for the wire material is 80 GPa. Calculate the following:a. Diameter of steel wire for inner spring. b. Stiffness of inner springc. Stiffness of the compound spring. I need answer ASAP. Thank you!
A typical compound helical spring consists of two coaxial closed coil spring having the following particulars: Outer spring 1: Mean coil diameter = 100mm Wire diameter = 12.5 mm No. of turns = 15 Inner spring 2: Mean coil diameter = 75 mm No. of turns = 20 Both the springs are of equal initial length when unloaded. If the working stress for each spring is to be the same. The modulus of rigidity for the wire material is 80 GPa. Calculate the following: a. Diameter of steel wire for inner spring b. Stiffness of inner spring c. Stiffness of the compound spring
(9) A Mercedes Benz gas engine valve spring should not exceed to a cylindrical space of 1¾-in in diameter. The spring index is 6.0 & the maximum load it will have to sustain is l00lb with corresponding deflection of ½-in. The spring is subjected to repeated loading & fatigue must be considered, a low working stress of 40,110psi will be used. Determine: (a) the diameter of wire based on commercial sizes; (b) the number of coils.
A helical compression spring is to be used for a maximum load of 1.5 kN using the spring index of 8. The maximum permissible shear stress for the spring wire is 400 MPa. Which of the following is the wire diameter of the spring to be used?
Q) A helical compression spring of a mechanism is subjected to Pas =120 N 19ad cycle. The diameter if the wire is 3 mm, with a spring index of € = 7 P, =4N and .The spring is made of oil-hardened and tempered steel, with”« ~ L0t dm Determine the factor of safety in fatigue loading.
A helical compression spring is 1o exert a force of 8.0 Ib when compressed 1o a length of 1.75 in. At a length of 1.25 in, the force must be 12.0 Ib. The spring will be installed in a machine that cycles slowly. and approximately 200 000 cycles total are expected. The tem- perature will not exceed 200°F. The spring will be installed in a hole having a diameter of 0.75 in. For this application. specify a suitable material, wire diameter. mean diameter. OD. ID. free length, solid length. number of coils, and type of end condition. Check the stress at the maximum operating load and at the solid length condition. The first of two solution procedures will be shown. The numbered steps can be used as a guide for future problems and as a Kind of algorithm for the spreadsheet approach that follows the manual solution.
a helical compression spring with squared and ground ends is ti be made of a steel wire 79 gpa and presetting is to be used. the operation load of the spring can be considered static. If the maximum working force is 292 N and a force of 35 N is required when the spring is 30 mm longer, determine the spring constant k
a helical compression spring with squared and ground ends is made of shot-peened astm a232 spring wire with presetting(G=79 GPa) . It is used to control a cyclic dynamic load that varies between 562 and 0 N. if a saftey factor of 1.12 is used, determine the allowable shear stress for a design cinsideration of infinite fatigue life
A spring with 12 active coils and a spring index of 9 supports a static load of 220 N with a deflection of 120 mm. The shear modulus of the spring material is 83 GPa. Working stress is 63 ksi, G = 10,800 ksi. 1. What is the theoretical wire diameter? 2. Determine the number of active coils.
A round steel rod made of structural steel, AISI C1118, As rolled is to be used as a column, centrally loaded with 15 kips; N= 2.75. Determine the diameter for (a) L= 20 in. (b) L= 5 in. (c) the same as (a) and (b) except that the material is AISI 9850, OQT 1100 F. Is there any advantage in using this material rather than structural steel?
A mechanism used in printing machinery consists of a tension spring assembled with a preload of 40 N. The mean diameter of the coilis 32 mm with a spring index of 8. The spring has 18 active coils. The spring wire is hard drawn and oil tempered having the following material properties: a.Design shear stress = 700 MPb b. .Modulus of rigidity = 80 kN/mm2 Identify (a) the initial torsional shear stress in the wire, (b) the spring rate, and (c) the force to cause the body of the spring to reach its yield strength.