An axial flow turbine is operated at a pressureof 24m and develops 24,2MW when rotating at 146 r/min. The tips of the blades are on a diameter of 4.72m and hub diameter is 2,1m. If the hydraulic is 94% and the overall efficiency 88%, determine the inlet and exit angles of the blades at the mean radius. Assume free vortex flow towards the rotor and conditions for maximum pow

An axial flow turbine is operated at a pressureof 24m and develops 24,2MW when rotating at 146 r/min. The tips of the blades are on a diameter of 4.72m and hub diameter is 2,1m. If the hydraulic is 94% and the overall efficiency 88%, determine the inlet and exit angles of the blades at the mean radius. Assume free vortex flow towards the rotor and conditions for maximum pow

Automotive Technology: A Systems Approach (MindTap Course List)

6th Edition

ISBN:9781133612315

Author:Jack Erjavec, Rob Thompson

Publisher:Jack Erjavec, Rob Thompson

Chapter34: Emission Control Diagnosis And Service

Section: Chapter Questions

Problem 2RQ: What will result from too little EGR flow? And what can cause a reduction in the flow?

See similar textbooks

Similar questions

An axial flow turbine is operated at a pressure head of 24m and develops 24.2MW when rotating at 146 r/min. The tips of the blades are on a diameter of 4,72m and the hub diameter is 2,1m. If the hydraulic efficiency is 94% and the overall efficiency 88%, determine the inlet and exit angles of the blades at the mean radius. Assume free vortex flow towards the rotor and conditions for maximum power
A Pelton wheel develops 12,900kW at 425rpm under a head of 505m. The efficiency of the machine is 84%. Find (1) discharge of the turbine, (2) diameter of the wheel, and (3) diameter of the nozzle. Assume Cv = 0.98, and ratio of bucket speed to jet speed ¼ 0.46 Draw the schematic diagram and full solution showing formulas use.
For an inward flow reaction turbine has an external diameter as 1.5 m and width of 13.5 cm. The turbine speed is 600 rpm and the water flow rate is 420m / min. The turbine operates under a head of 260 m and developing 16.12 MW. Calculate efficiency, baled angle at inlet, and guide vane angle at inlet, if the velocity at the draft tube inlet is 16 m / s.
An inward flow turbine is supplied with 245L of water per second and works under a total head of 30m. The velocity of wheel periphery at inlet is 16m/s. The outlet pipe of the turbine is 28cm in diameter. The radial velocity is constant. Neglecting friction, calculate (1) The vane angle at inlet (2) The guide blade angle (3)Power Show schematic diagram ang provide solutions.
In a Francis turbine, when 6N force is applied to the disc with a radius of 0.08m, the revolution rate is 2500 rpm, the water flow rate is 8 m3 / h, the inlet pressure is 12 mSS and the outlet pressure is 0 mSS. In this case, calculate. Francis turbine efficiency
Turpomachinery A multi-jet Pelton turbine of 1.47 m wheel diameter operates under a head of 200 m and has a specific speed of Ns = 42. The jet/wheel diameters ratio is 0.113. The wheel efficiency is 88% and the velocity coefficient of all nozzles is Cv = 0.95. The speed factor is (Φ=0.47). Determine: Your answer The bucket angle The bucket speed The jet velocity The developed power
In a Parson reaction turbine, the angles of receiving tips are 35º and of discharging tips 20º.The blade speed is 125 m/s. Calculate the tangential force, power developed, diagramefficiency and axial thrust of the turbine, if it steam consumption is 1.5 kg/min.
What is most likely to happen to a kaplan turbine without any draft tube in a commercial hydropowersites?
A 5 MW turbine is developed under an effective head of 320 m. The turbine efficiency is85%. Velocity coefficient of the nozzle is 99%.(a)Select which is the appropriate turbine based on effective head. (b)What should be the wheel diameter in meters assuming it is 12 times the diameter of the jet?
A Kaplan turbine delivering 40 MW works under a head of 35 m and runs at 167 rpm.The hub diameter is 2.5 m and runner tip diameter is 5 m. The overall efficiency is 87%.Determine the blade angles at the hub and tip and also at a diameter of 3.75 m. Also find the speed ratio and flow ratio based on tip velocity. Assume ηH = 90%. Outlet blade angle at the mean diameter
An existing impulse turbine-generator installation operates at 450 rpm under a net Head of 520 m. The output current is 60 cycles per second. If a single 18-cm diameter waterjet is used, Cv = 0.98, Øe = 0.45 and ηT = 0.85. Find the flow through turbine in m3/sec.
The nozzle angle for an axial flow impulse turbine is 15°. The inlet absolutevelocity is 800 ft./s and the blade speed is 550 ft./s. Axial speed at the inlet andoutlet is assumed to be a constant. Calculate (a) energy transfer E, (b) change intotal (stagnation) and static enthalpies, (c) utilization factor.Ans: E=∆h0=245,038 ft-lbf/slug; ∆h=0; ε=0.77