An ice chest whose outer dimensions are 30 cm x 40 cm x 40 cm is made of 3-cm-thick Styrofoam (k = 0.033 W/m - °C). Initially, the chest is filled with 28 kg of ice at 0°C, and the inner surface temperature of the ice chest can be taken to be 0°C at all times. The heat of fusion of ice at 0°C is 333.7 kJ/kg, and the surrounding ambient air is at 25°C. Disregarding any heat transfer from the 40 cm x 40 cm base of the ice chest, determine how long it will take for the ice in the chest to melt %3D completely if the outer surfaces of the ice chest are at 8°C. T = 25°C Ice chest D 0°C 3 сm 0°C Styrofoam

An ice chest whose outer dimensions are 30 cm x 40 cm x 40 cm is made of 3-cm-thick Styrofoam (k = 0.033 W/m - °C). Initially, the chest is filled with 28 kg of ice at 0°C, and the inner surface temperature of the ice chest can be taken to be 0°C at all times. The heat of fusion of ice at 0°C is 333.7 kJ/kg, and the surrounding ambient air is at 25°C. Disregarding any heat transfer from the 40 cm x 40 cm base of the ice chest, determine how long it will take for the ice in the chest to melt %3D completely if the outer surfaces of the ice chest are at 8°C. T = 25°C Ice chest D 0°C 3 сm 0°C Styrofoam

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Consider a cold aluminum canned drink that is initially at a uniform temperature of 4°C. The can is 12.5 cm high and has a diameter of 6 cm. If the combined convection/radiation heat transfer coefficient between the can and the surrounding air at 25°C is 10 W/m2 · °C, determine how long it will take for the average temperature of the drink to rise to 15°C. In an effort to slow down the warming of the cold drink, a person puts the can in a perfectly fitting 1-cm-thick cylindrical rubber insulator (k = 0.13 W/m · °C). Now how long will it take for the average temperature of the drink to rise to 15°C? Assume the top of the can is not covered.
A 40-cm-long, 800-W electric resistance heating element with diameter 0.5 cm and surface temperature 120°C is immersed in 75 kg of water initially at 20°C. Determine how long it will take for this heater to raise the water temperature to 80°C. Also, determine the convection heat transfer coefficients at the beginning and at the end of the heating process.
During a picnic on a hot summer day, the only available drinks were those at the ambient temperature of 90°F. In an effort to cool a 12-fluid-oz drink in a can, which is 5 in high and has a diameter of 2.5 in, a person grabs the can and starts shaking it in the iced water of the chest at 32°F. The temperature of the drink can be assumed to be uniform at all times, and the heat transfer coefficient between the iced water and the aluminum can is 30 Btu/h·ft2·°F. Using the properties of water for the drink, estimate how long it will take for the canned drink to cool to 40°F.
The chilling room of a meat plant is 15 m × 18 m × 5.5 m in size and has a capacity of 350 beef carcasses. The power consumed by the fans and the lights in the chilling room are 22 and 2 kW, respectively, and the room gains heat through its envelope at a rate of 14 kW. The average mass of beef carcasses is 220 kg. The carcasses enter the chilling room at 35C, after they are washed to facilitate evaporative cooling, and are cooled to 16°C in 12 h. The air enters the chilling room at 2.2°C and leaves at 0.5°C. Determine (a) the refrigeration load of the chilling room and (b) the volume flow rate of air. The average specific heats of beef carcasses and air are 3.14 and 1.0 kJ/kg · °C, respectively, and the density of air can be taken to be 1.28 kg/m3 .
A person puts a few apples into the freezer at -13°C to cool them quickly for guests who are about to arrive. Initially, the apples are at a uniform temperature of 37°C, and the heat transfer coefficient on the surfaces is 6.3 W/m2 · °C. Treating the apples as 8.2-cm-diameter spheres and taking their properties to be ρ= 836 kg/m3, Cp = 4.05 kJ/kg · °C, k= 0.426 W/m · °C, and α= 1.43 ×10-7 m2/s, determine the center and surface temperatures of the apples in 1.9 h
An average man has a body surface area of 1.8 m2 and a skin temperature of 330C. The convective heat transfer coefficient for a clothed person walking in still air is expressed as h= 8.6V0.53 where V is the walking velocity in m/s. Assuming the average surface temperature of the clothed person to be 300C, determine the rate of heat lost by convection from an average man walking in still air at 100C at a walking velocity of 1.2 m/s.
A person puts a few apples into the freezer at 15°C cool them quickly for guestswho are about to arrive. Initially, the apples are at a uniform temperature of 20°C,and the heat transfer coefficient on the surfaces is 8 W/m2·K. Treating the apples as9-cm-diameter spheres and taking their properties to be 840 kg/m3, Cp 3.81 kJ/kg·K, k = 0.418 W/m·K, and α =10-7 m2/s, determine the center and surface temperatures of the apples in 1 h. Also, determine the amount of heat transfer from each apple. Solve this problem using analytical one-term approximation method (notthe Heisler charts). Answer: Center: 11.2 ℃, Surface: 2.7 ℃, heat transfer: 17.2 kJ
A 0.3-cm-thick, 12-cm-high, and 18-cm-long circuit board houses 80 closely spaced logic chips on one side, each dissipating 0.06 W. The board is impregnated with copper fillings and has an effective thermal conductivity of 16 W/m · °C. All the heat generated in the chips is conducted across the circuit board and is dissipated from the back side of the board to the ambient air at 30°C, which is forced to flow over the surface by a fan at a free-stream velocity of 400 m/min. Determine the temperatures on the two sides of the circuit board.
Consider a 1.2-m-high and 2-m-wide double-pane window consisting of two 0.0023-m-thick layers of glass (k = 0.78 W/m·K) separated by a 12-mm-wide vacuum space. Take the convection heat transfer coefficients on the inner and outer surfaces of the window to be h1 = 10 W/m2·K and h2 = 25 W/m2·K, and disregard any heat transfer by radiation. Assume that the space between the two glass layers is evacuated.Determine the steady rate of heat transfer (in W) through the glass window. The room is maintained at 24°C while the temperature of the outdoors is –5°C. (Radiation in outer side of the double-pane window should be disregarded but in the inner part, the only mechanism of heat transfer in vacuum is by radiation. Emissivity for glass is around 1, and the temperature of inner surfaces of the double-pane window should be assumed to be 5 and 15 'C.)
A cylindrical fuel rod of 2 cm in diameter is encased in a concentric tube and cooled by water. The fuel generates heat uniformly at a rate of 150 MW/m3. The convection heat transfer coefficient on the fuel rod is 5000 W/m2∙K, and the average temperature of the cooling water, sufficiently far from the fuel rod, is 70°C. Determine the surface temperature of the fuel rod and discuss whether the value of the given convection heat transfer coefficient on the fuel rod is reasonable.
The heat is dissipated from the plate by convection and radiation into surrounds at 20 C . Take ε =0.8 , σ =5.67×10**-8 and h∞ = 6 W/m**2. K. If the surface temperature of the plate is 50 C ,the value of the heat flux from the plate is :
A 10-cm diameter copper ball is to be heated from 80°C to an average temperature of 160°C in 30 minutes. Taking the average density and specific heat of copper in this temperature range to be 8950 kg/m3 and Cp = 0.395 kJ/kg · °C, respectively, determine the average heat flux.