An inductor has a 57.8-0 reactance when connected to a 60.0-Hz source. The inductor is removed and then connected to a 49.0-Hz source that produces a 95.0-V rms voltage. What is the maximum current in th inductor?

An inductor has a 57.8-0 reactance when connected to a 60.0-Hz source. The inductor is removed and then connected to a 49.0-Hz source that produces a 95.0-V rms voltage. What is the maximum current in th inductor?

Physics for Scientists and Engineers: Foundations and Connections

1st Edition

ISBN:9781133939146

Author:Katz, Debora M.

Publisher:Katz, Debora M.

Chapter33: Inductors And Ac Circuits

Section: Chapter Questions

Problem 33PQ

See similar textbooks

Similar questions

A 200- resistor, 150- F capacitor, and 23-H inductor are connected in series with an ac source of amplitude 10 V and variable angular frequency . (a) What is the value of the resonance frequency R? (b) What is the amplitude of the current if =R ? (c) What is the phase constant of the current when =R ? Is it leading or lagging the source voltage, or is It In phase? (d) Write an equation for the voltage drop across the resistor as a function of time when =R . (e) What is the power factor of the circuit when =R ? (f) How much energy is used up by the resistor in 2.5s when =R ?
An ac source of emf delivers 5.0 mW of power at an rms current of 2.0 mA when it is connected to the primary cod of a transformer. The rms voltage across the secondary coil is 20 V. (a) What are die voltage across the primary coil and the current through the secondary coil? (b) What is the ratio of secondary to primary turns for the transformer?
A step-down transformer has 65 turns in its primary coil and 10 turns in its secondary coil. The primary coil is connected to standard household voltage (Erms= 120.0 V, 60.0 Hz), a. What is the rms voltage in the secondary coil? b. If, instead, the transformer is connected to a 6-V DC battery, what is the rms voltage in the secondary coil after the first few milliseconds?
In an RLC series circuit, the voltage amplitude and frequency of the source are 100 V and 500 Hz, respectively, an R = 5O0. L=0.20H, and C=2.0F . (a)What is the impedance of the circuit? (b) What is the amplitude of the current from the source? (C) If the emf of the source Is given by v(tt)=(100V)sin , how does the current vary with time? (d) Repeat the calculations with C changed to 0.20F .
A resistor and inductor are connected in series across an ac generator. The emf of the generator is given by v(t)=V0cost , where V0=120V and =120rad/s ; also, R=400 and L = 1.5 H. (a) What Is the impedance of the circuit? (b) What is the amplitude of the current through the resistor? (C) Write an expression for the current through the resistor. (d) Write expressions representing the voltages across the resistor and across the inductor.
An RLC series circuit has an impedance of 60 and a power factor of 0.50, with the voltage Lagging the current (a) Should a capacitor or an inductor be placed in series with the elements to raise the power factor of the circuit? (b) What is the value of the capacitance or self-inductance that will raise the power factor to unity?
An 80.0- resistor and a 200-mH inductor are connected in parallel across a 100-V (rms), 60.0-Hz source. (a) What is the rms current in the resistor? (b) By what angle does the total current lead or lag behind the voltage?
A 60.0-ft resistor is connected in series with a 30.0-F capacitor and a source whose maximum voltage is 120 V, operating at 60.0 Hz. Find (a) the capacitive reactance of the circuit, (b) the impedance of the circuit, and (c) the maximum current in the circuit. (d) Does the voltage lead or lag the current? (e) How will adding an inductor in series with the existing resistor and capacitor affect the current? Explain.
An RLC series circuit has a 1.00 k(resistor, a 1.50 (H inductor, and a 25.0 nF capacitor. (a) Find the power factor at f = 7.50 Hz. (b) What is the phase angle at this frequency? (c) What is the average power at this frequency? (d) Find the average power at the circuit’s resonant frequency.
A power plant generator produces 100 A at 15 kV (rms). A transformer is used to step up the transmission line voltage to 150 kV (rms). (a) What is rms current in the transmission line? (b) If the resistance per unit length of the line is 8.6108/m , what is the power loss per meter in the line? (c) What would the power loss per meter be If the line voltage were 15 kV (rms)?
An PLC series circuit with R=600 , L = 30 mH. and c=0.050F is driven by an ac source whose frequency and voltage amplitude are 500 Hz and 50 V, respectively, (a) What is the impedance of the circuit? (b) What is the amplitude of the current in the circuit? (c) What is the phase angle between the emf of the source and the current?
A 20 resistor, 50F capacitor, and 30-mH inductor are connected in series with an ac source of amplitude 10 V and frequency 125 Hz. (a) What is the impedance of the circuit? (b) What is the amplitude of the current in the circuit? (c) What is the phase constant of the current? Is it leading or lagging the source voltage? (d) Write voltage drops across the resistor, capacitor, and inductor and the source voltage as a function of time, (e) What is the power factor of the circuit? (f) How much energy is used by the resistor in 2.5 s?