An inductor (L=400 mH), a capacitor (C = 4.43 uF), and a resistor (R = 500 02) are connected in series. A 46.0-Hz AC generator connected in series to these elements produces a maximum current of 270 mA in the circuit. (a) Calculate the required maximum voltage AVmax (b) Determine the phase angle by which the current leads or lags the applied voltage. the voltage by a magnitude of I The current (Ctrl)

An inductor (L=400 mH), a capacitor (C = 4.43 uF), and a resistor (R = 500 02) are connected in series. A 46.0-Hz AC generator connected in series to these elements produces a maximum current of 270 mA in the circuit. (a) Calculate the required maximum voltage AVmax (b) Determine the phase angle by which the current leads or lags the applied voltage. the voltage by a magnitude of I The current (Ctrl)

Physics for Scientists and Engineers: Foundations and Connections

1st Edition

ISBN:9781133939146

Author:Katz, Debora M.

Publisher:Katz, Debora M.

Chapter33: Inductors And Ac Circuits

Section: Chapter Questions

Problem 31PQ

See similar textbooks

Similar questions

An ac source of voltage amplitude 10 V delivers electric energy at a rate of 0.80 W when its current output is 2.5 A. What is the phase angle between the emf and the current?
A 40-mH inductor is connected to a 60-Hz AC source whose voltage amplitude is 50 V. If an AC voltmeter is placed across the inductor, what does it read?
The emf of an ac source is given by v(t)=V0sint, where V0=100V and =200 . Find an expression that represents the output current of the source if it is connected across (a) a 20-pF capacitor, (b) a 20-mH inductor, and (c) a 50 resistor.
A 1.5k resistor and 30-mH inductor are connected in series, as below, across a120-V(rms)ac power source oscillating at 60-Hz frequency. (a) Find the current in the circuit. (b) Find the voltage drops across the resistor and inductor. (C) Find the impedance of the circuit. (d) Find the power dissipated in the resistor. (e) Find the power dissipated in the inductor. (1) Find the power produced by the source.
A 20-mH inductor is connected across an AC source with a variable frequency and a constant-voltage amplitude of 9.0 V. (a) Determine the reactance of the circuit and the maximum current through the inductor when the frequency Is set at 20 kHz. (b) Do the same calculations for a frequency of 60 Hz.
The emf of an ac source is given by v(t)=v0sint. where V0=100V and at =200rad/s . Calculate the average power output of the source if it is connected across (a) a 20F capacitor, (b) a 20-mH inductor, and (c) a 50 resistor.
At 1000 Hz, the reactance of a 5.0-mH inductor is equal to the reactance of a particular capacitor. What is the capacitance of the capacitor?
Explain why at high frequencies a capacitor acts as an ac short, whereas an inductor acts as an open circuit.
An LC circuit in an AM tuner (in a car stereo) uses a coil with an inductance of 2.5 mH and a variable capacitor. If the natural frequency of the circuit is to be adjustable over the range 540 to 1600 kHz (the AM broadcast band), that range of capacitance is required?
A 700-pF capacitor is connected across an ac source with a voltage amplitude of 160 V and a frequency of 20 kHz. (a) Determine the capacitive reactance of the capacitor and the amplitude of the output current of the source. (b) If the frequency is changed to 60 Hz while keeping the voltage amplitude at 160 V, what are the capacitive reactance and the current amplitude?
Suppose a coil has a self-inductance of 20.0 H and a resistance of 200 . What (a) capacitance and (b) resistance must be connected in series with the coil to produce a circuit that has a resonant frequency of 100 Hz and a Q of 10?
In an ideal AC circuit with capacitance, there is no resistance. Is any energy dissipated? How about in a real AC circuit with capacitance?