An insulated, electrically heated tank for hot water contains 260 kg of liquid water at 95°C when a power outage occurs. If water is withdrawn from the tank at a steady rate m = 0.2 kg/s. Assume cold water enters the tank at 17°C and negligible heat losses from the tank. For liquid water let Cv=Cp=C, independent of T and P. The time in seconds to take the temperature of the water in the tank to drop from 95 to 70°C is 414.4588 O 111.6316 O 296.0661 227.1352

An insulated, electrically heated tank for hot water contains 260 kg of liquid water at 95°C when a power outage occurs. If water is withdrawn from the tank at a steady rate m = 0.2 kg/s. Assume cold water enters the tank at 17°C and negligible heat losses from the tank. For liquid water let Cv=Cp=C, independent of T and P. The time in seconds to take the temperature of the water in the tank to drop from 95 to 70°C is 414.4588 O 111.6316 O 296.0661 227.1352

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A steam turbine operates with inlet conditions of 500 C and 2 MPa, and exit conditions of 10 kPa and x=0.95. If the required turbine work per kilogram of steam flow is 900 kj/kg. calculate the magnitude of heat transfer from the turbine per unit mass of steam.
R-134a enters a compressor as a saturated vapor at 80 kPa and exits at a pressure of 400 kPa. If 44 kJ/kg of work is required and 5 kJ/kg of heat is lost to the surroundings. What is the outlet temperature. Round your answer to the nearest whole number.
It is proposed to pump 10,000 kg/h of toluene at 114°C and 1.1 atm abs pressure from the reboiler of a distillation tower to a second distillation unit without cooling the toluene before it enters the pump. If the friction loss in the line between the reboiler and pump is 7 kN/m^2 and the density of toluene is 866 kg/m^3, how far above the pump must the liquid level in the reboiler be maintained to give a net positive suction head of 2.5m?
An air compressor draws air from the atmosphere and discharges it at 500 kPa through a 100 mm-diameter outlet at 100 m/s. Determine the minimum power required to drive the insulated compressor. Assume atmospheric conditions of 25 C and 80 kPa.
A pump is used to raise the pressure of a stream of water from 10 kPa to 0.7 MPa. The temperature of the water is the same at the inlet and outlet and equal to 20°C. The velocity also does not change across the pump. If the mass flow rate is 14 kg/s, what power is needed to drive the pump? Assume frictionless flow and no significant elevation change.
An adiabatic expansion of air occurs through a nozzle from 830 KPa and 750C to 140 KPa.The initial kinetic energy is negligible. For an isentropic expansion,4.1 Determine the specific volume4.2 Determine the final temperature4.3 Solve for the speed at the exit section
In a gas turbine , the flow rate of air is 4 kg/sec . The velocity and enthalpy of air at the entrance are 200 m/sec and 6000 KJ/kg respectively . At the exit , the velocity is 100 m/sec and enthlpy is 5000 KJ /kg . A loss of heat of 40 KJ/kg occurs while the air passes through the turbine . Determine the power developed by the turbine
A vehicle travelling at 100 km/h has air passing through its radiator at the rate of 100 kg mol per minute. The hot water from cooling the engine is circulated through the radiator at the rate of 10 L per minute, and as it passes through the radiator it is cooled from 78 °C to 32 °C. Assume the car is in good condition so the radiator has no leaks and the air and water do not contact. Given the heat capacity of the air is 1.0035 J·g-1·K-1, what is the temperature of the air exiting the radiator (assume air has a molecular weight of 29 g·mol-1).
At a particular stage of a reaction turbine the mean blade speed is 140 m/sec and the steam is at a pressure of 20 bar with temperature of 250° C. Fixed and moving blades at this stage have inlet angles 30° and exit angles 20°. The stage efficiency is 80%. Determine (1) Specific entholpy drop across the stage in kJ/kg.
Water vapor enters a Lule with an input cross-sectional area of 0.02 m2 at a temperature of 1.8 MPa and 400C. Water vapor passes through the Lule with a flow of 5 kg/s, and in this process there is a heat loss of 2.8 kJ / kg from the Lule. If the pressure at the outlet is 1.4 MPa and the speed is 275 M/s, find the speed at which the water vapor enters the Lule and the temperature at the outlet of the Lule.
Water at 200 kPa and 355K (H=343.3 kJ/kg) enters the straight horizontal pipe at velocity 3 m/s whereit is heated by flue gases from outside. Steam leaves the system at 100 kPa and 423K (H=2776.3 kJ/kg) ata velocity of 200 m/s. How much heat must have been supplied per kg of water flowing?
A single-cylinder reciprocating compressor has a 5% clearance and a bore and stroke of 25 cm x 30 cm, respectively. The compressor operates at 500 RPM. The air enters the cylinder at 27 C and 95 kPa and discharges at 2000 kPa. Ambient air conditions are 101.3 kPa and 27C. If the polytropic exponent n = 1.3 for compression and re-expansion processes, A.) determine the volume of the actual air being delivered by the compressor in m3/hr. B.) the power required to drive the unit, in kW, if the compressor efficiency is 82%.