An inverted cone has a radius of 12ft and height of 15ft. The cone is 80% full of a fluid having a density of 40lb/ft3. Determine the weight of the fluid in Newton.
Q: Crude oil (with specific weight γoil = 55 lb/ft3 ) is pumped at a rate of 400 gallons per minute…
A: Given data, Q = 400 gallons/min = 4007.48×60ft3/s density of soil (γoil) = 55 lb/ft3pressure at A…
Q: NOTE (h in ft) h = 8.881 ft Problem II. A proposed elevated tank for a certain community has a…
A: Given Unit weight of water= 62.4 lb/ft3 Height of tank = 120 inches
Q: A pressure gage at elevation of 12m at the side of the tank containing liquid reads 100 kPa. Another…
A: Given data in question Elevation heads at 2 points Pressure at 2 points Since the cross section at…
Q: Calculate the volume flow rate of oil from the nozzle and the pressure at point A and B.
A:
Q: An inverted cone has a diameter of 6m and height of 9m. At t = 0, it is filled with water when a…
A: Volume of Cone is given by V= 13πr2hV = 13π×32×9V = 84.78 m3Now lets find out flow rate through…
Q: A 1.5m cylinder (s=2.45) is 10m long and it held two different liquid at both sides. If the liquid…
A: Given data Specific gravity Length Depth Radius I have assumed the depth of left side fluid is…
Q: A cylindrical tank containing a fluid (sg = 0.75) is accelerated upward by a net force of 40 lb. The…
A:
Q: A tube is used as a siphon to discharge an oil of specific gravity 0.8 from a large open vessel into…
A: Since the question comprises of a number of subparts, the solution for first 3 subparts is as…
Q: A cylindrical tank 1.5 m diameter is filled with water at 2.5 m high. What size of orifice must be…
A: Solution: Given data: Diameter=1.5 m height of water=2.5 m
Q: E A pump is installed in a pipeline of diameter of 0.2 m. Close to the pump gauges are installed on…
A:
Q: The jets from a water sprinkler are 20mm in diameter. Each has a radius of 0.6m from the main…
A:
Q: In pumping 1400 gpm of heavy fuel oil (sp. gr. = 0.90) through a new steel pipe, a friction loss of…
A: Solution: Given Data: S.G=0.90→S=900 kg/m31 GPM=3.7854 lpmTherefore,…
Q: closed cylindrical tank is 2.0 m high and 1.0 m in diameter and contains oil (sg = 0.70) at a depth…
A: w=20rad/s R1=0.5m
Q: An airflows in a circular cylinder with a speed of 320 m/s the pressure is 121,751.5 N/m. What will…
A: Question is based on the airflow in a right circular cylinder . Speed of flow and pressure are given…
Q: An open cylindrical vessel 1.20m in diameter and 2.10m high is 2/3 full of water. If the vessel is…
A: Given data in question Diameter Height Constant speed rotation To find out Height of paraboloid
Q: Water entering a pump through an 200mm diameter pipe at 27.6 kPa has a flow rate of 0.1 m^3/s. It…
A:
Q: A jet of water strikes with a velocity of 26.36 m/s on a flat plate, inclined at 30o with the axis…
A: Velocity v= 26.36m/s Diameter of nozzle =291mm
Q: An open cylindrical tank 2m in diameter and 6m tall has 2m of oil (SG = 0.80), 1.2m of an unknown…
A:
Q: A small funnel in the shape of a cone is being emptied of fluid at the rate of 15 cubic centimeters…
A: Given values, rate of flow = 15 cubic centimeters per second height of the funnel = 23 cm radius…
Q: Calculate the pressure due to a column of 10.0m of (a) water, (b) mercury of sp. gr. 13.6, and (c)…
A:
Q: A liquid having a sp.gr. of 20 is flowing in a 50 mm diameter pipe. The total head at a given point…
A:
Q: A circular vessel 2m in diameter and 3m high is one-third filled with liquid A having s.g. of 1.0,…
A: Step 1
Q: An open circular cylinder of 1m diameter and 2m depth is completely filled with water. Find the…
A:
Q: Determine the rate of flow of water through a pipe of 300 mm diameter placed in an inclined position…
A: Rate of flow the rate at which a liquid or other substance passes through a channel or conduit. The…
Q: 150 mm diameter, having a coefficient of contraction of 0.65 discharges oil (SG=0.80) under a head…
A: Given:- d=150mm SG=0.80 coefficient of contraction =0.65 head=8m average actual velocity =11.65m/s…
Q: 7. For the water flow in a vertical pipe shown. The velocity at section 1 is 1.55 m/sec, find the…
A: P1ρg + v212g + Z1 = P2ρg + v222g + Z2 Can be written as ; P1ρg+Z1-P2ρg+Z2 = v22 - v212g…
Q: Calculate the volume flow rate of oil from the nozzle and the pressure at point B and D.
A:
Q: 1. A horizontal venturimeter with inlet diameter of 200 mm and throat diameter of 100 mm is used to…
A: As per bartleby policy, I can answer only the first question. If you want the answer for remaining…
Q: An open jet of water at 20 ℃ exits a nozzle into sea-level air and strikes a stagnation tube, as…
A: Continuity equation is given by- a1v1=a2v2v1=16144v2v1=v29 Bernoulli equation is given by-…
Q: diameter of cylindrical tank = 2 meters depth of cylindrical tank = 8 meters diameter of…
A: If fluids are in their single state, it is used to measure the flow rate through an orifice. An…
Q: 4.) A 75 mm diameter pipe, 2 m long is just filled with oil (sp. gr. = 0.822) and then capped, and…
A:
Q: A pipe 3in in diameter is fitted to a water tank as shown in figure 2. The nozzle 1in in diameter at…
A: To determine: flow rate pressure at C velocity at D Given, Pipe diameter (D) = 3 in Nozzle…
Q: An open cylindrical tank 4 ft in diameter and 6 ft deep is filled with water and rotated about its…
A:
Q: Coneider incompressible, frictionless flow of a fluld in a horizontal pipe. The pressure and…
A:
Q: The 275-kg circular craft is suspended 100 mm from the ground. For this to occur, air is drawn in at…
A: Given data 275 kg circular craft Density of air = 1.22 kg /m3 velocity = 18 m/s Fluid is…
Q: A 75 mm diameter orifice discharges 0.023 m3/s of liquid under a head of 2.90 m. The diameter of the…
A:
Q: Smooth pipe: d=50mm P1 1 10 m I 40m->> 20m 80 m Open jet
A:
Q: What flows through a 0.305m vertical pipe downwards at a rate of 1.70 x 10^(-4) m^3/s exiting into…
A: V=1.28m/s d=0.013m
Q: Pa. Assuming that the suction and discharge sides of the pump are at the same elevation, find the…
A: Given data Specific gravity of oil, SG=0.82 Flow rate=0.07 m3/s
Q: Water flows steadily through a nozzle at 60 kg/s. the diameters are D1 = 220 mm and D2 = 80 mm.…
A:
Q: A liquid having a sp.gr. of 20 is flowing in a 50 mm diameter pipe. The total head at a given point…
A:
Q: An orifice 50 mmø with C= 0.60 is located at lower portion left side as shown. An open mercury…
A: The maximum height at which a pump can transfer fluid against gravity is called head. This is the…
Q: liquid in Fig. D has a specific gravity of 1.50. The gas pressure is P = +5.67 lb per sq in. and Pb…
A:
Q: A venturi meter with a throat diameter of 100 mm is fitted in the inclined pipeline of 200 mm…
A:
Q: Two vertical conical tanks are joined at the vertices by a pipe. Initially the bigger tank is full…
A:
Q: Data measured during tests of a centrifugal pump at 2750 rpm are Parameter Inlet, Section O Outlet,…
A:
Q: How much water (m³) is left if the track is traveling horizontally at 9.81 m/s^2
A:
Q: The head of water at the inlet of a pipe 2000 m long and 500 mm diameter is 60 m. A nozzle of…
A: Given: Length of pipe, L = 2000 m Diameter, D = 500 mm = 0.5 m Head, H = 60 m Nozzle diameter, d =…
Q: An open cylindrical tank having a radius of 0.30 m. and a height of 1.20 m. is filled with water at…
A: Solution Given Data Radius of cylindrical tank= 0.30 m Height= 1.20 m Depth=0.90 m
Q: A pipeline connecting three tanks contains 10 standard long elbows, 5 globe valves that is half…
A:
Step by step
Solved in 2 steps
- An open rectangular tank 3.8m high, 2.5m wide and 6m long is filled with water at a depth of 2.2m. If it is accelerated at 2.3 m/s^2 and is moving at a plane inclined 15 degrees from the horizontal, determine the following: a. acceleration of the vessel along the horizontal; and b. angle of fluid inclination. Note: Use density of water as 1000kg/m3 and specific weight as 9.81kN/m3.A cylindrical vessel 15 cm diameter and 40 cm long is completely filled with water. The vessel is open at the top. Find the quantity of water left in the vessel in cm^3, when it is rotated about its vertical axis with a speed of 300 rpm.An oil flow rate of 0.012 m³/s is required in an industrial process. The flow system includes a pressure tank pushing the oil through 200 m of new ductile iron pipe (DIP: 15 cm diameter, square-edged entrance) to point "2" (atmospheric pressure) as shown in Figure P3.11.11. The sur face of the fluid in the tank (point "1") is at elevation 100 m and the end of the pipe (point "2") is at elevation 106 m. What air pressure will be needed over the fluid to produce the requisite flow? (S.G. (oil) = 0.84, v 2.03 x 106 m²/s, and e = 0.00012 m.)
- Water enters a large rigid tank steadily at a rate of V . = 0.5 m3/s, and exits through a large rectangular opening through which the velocity changes linearly in the vertical direction from 4 m/s to 5 m/s. Knowing that the tank is full, determine the magnitude of the velocity through the circular opening at the top whose diameter is D = 15 cm.1. The head of water at the inlet of a pipe 2000 m long and 500 mm diameter is 60 m. A nozzle of diameter 100 mm at its outlet is fitted to the pipe. a) Determine the velocity of water at the outlet of the nozzle if friction coefficient for the pipe is 0.01.a circular cone s(0.99) floats vertically as shown in the figure, determine if it is stable or unstable, for that position R=0.75m and h=1.50m
- Consider a rectangular plate of width B = 1m (measured in the direction normal to the plane of this sheet) and negligible thickness, which separates two fluids of densities ρ and ρw. A mass of density ρs is supported by an inextensible rope that passes through a pulley connected to one end of the plate. Consider that ρ = 1.59ρw and ρs = 2.40ρw, where ρw = 1000 kg/m3. Determine the volume that this mass must have for the system to remain in equilibrium, as shown in the figure.An open rectangular tank, 9.62 ft. high, 11.29 ft. long, and 5.19 ft. wide, has liquid (SG = 0.53) to a depth of 6.54 feet. Determine the maximum horizontal acceleration (ft/s2) that can be applied to the tank such that no liquid will spill.A tank containing water moves horizontally (parallel to length) with a constant linear acceleration of 3 m/s2 . The tank is 3 m long and the depth of water when the tank is at rest is 1.5 m. FIND THE FOLLOWING: A. what angle (degrees) does the water make during acceleration? B. what is the minimum height of the vessel for no spilling of water? C. what is the maximum pressure head? (m)
- A cylindrical tank contains a certain liquid (SG = 2.75) to a depth of 0.4 m. A pressure of 78 kPa is acting at the surface of the liquid. If it is accelerated upwards at 3.43 m/s2, what is the resulting pressure (kPa) at the bottom of the tank?diameter = 60 cm height = 60 cm The CLOSE cylindrical tank is two-thirds full of water. It is subjected to pressure = 10 kpag. Considering that the tank is to rotate about the axis at the center at 10 rad/s a. What is the pressure at point C? b. What is the pressure at point D?Q4 A plate 0.05 mm distant from a fixed plate moves at 1.2 m / s and requires a force of 2.2 N / m² to maintain this speed. Find the viscosity of the fluid between the plates.