An ultrasonic sensor is installed at the top of a tank to measure the level water inside it. If the range of the measurement is 200 to 800 mm from the top of the tank, what is the fastest sampling time (in millisecond) that can be implemented? Use a speed of sound of 340 m/s. a. 0.59 C. 0.89 b. 0.72 d. 1.2

An ultrasonic sensor is installed at the top of a tank to measure the level water inside it. If the range of the measurement is 200 to 800 mm from the top of the tank, what is the fastest sampling time (in millisecond) that can be implemented? Use a speed of sound of 340 m/s. a. 0.59 C. 0.89 b. 0.72 d. 1.2

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

an automobile speedometer is graduated in 5 kmph increaments and has accuracy rated to be within 4% . estimate the 95% uncertainty in indicated speed at 90 kmph??
A pressure sensor is used to measure the water level in a tank. What pressure would you expect for 2 m of water?
Discuss the importance of measuring devices for Electric Motor and Internal Combustion Engine in terms of accuracy.
In calibration of instrument the 0.055 percent of the calibration span what does it mean. If let say the range of pressure transmitter is 0 - 250 psi. Can you shown me the calibration results using 0.055 percnt calibration span.
In turbine flow sensors, besides the rotor, there are stationary flow varies which smoothen the flow to increase the ________. a. sensitivity b. reproducibility c. reliability d. accuracy
What horsepower is supplied to air moving at 20 fpm through a 2 x 3 ft duct under a pressure of 3 in. water gage?
A displacement transducer has the following specifications: Linearity error: ±0.25% reading Drift: ±0.05%/°C reading Sensitivity error: ±0.25% reading Excitation: 10-25 V dc Output: 0-5Vdc Range: 0-5 cm The transducer output is to be indicated on a voltmeter having a stated accuracy of 0:1% reading with a resolution of 10 μV. The system is to be used at room temperature, which can vary by 10 °C. Assume 95% confidence. The displacement transducer above is used in measuring the displacement of a body impacted by a mass. Twenty measurements are made, which yield Determine a best estimate for the mass displacement at 95% probability based on all available information.
A displacement transducer has the following specifications: Linearity error: ±0.25% reading Drift: ±0.05%/°C reading Sensitivity error: ±0.25% reading Excitation: 10-25 V dc Output: 0-5Vdc Range: 0-5 cm The transducer output is to be indicated on a voltmeter having a stated accuracy of 0:1% reading with a resolution of 10 μV. The system is to be used at room temperature, which can vary by 10 °C. Assume 95% confidence. The displacement transducer above is used in measuring the displacement of a body impacted by a mass. Twenty measurements are made, which yield X= 17.20mm Sx= 1.70mm Determine a best estimate for the mass displacement at 95% probability based on all available information.
Question 1 (a) Explain what you understand by the term Callibration. (b) Describe in details the process of calibrating a digital industrial thermometer. Question 2 (a) Explain the importance of Primary, secondary and tertiary standards employed in Metrology. (b) By giving appropriate examples outline the advantages and disadvantages of Line and end standards. Question 3 Describe the types of errors and defects encountered in measuring instruments used in metrology.
n a certain dynamic measurement application the input(x) – output(y) relationship is given by y=1+(1+x)e^(-x) With what uncertainty must x be determined to yield a relative uncertainty of ±5 percent for y at a value of x = 2,4
Correct the following false statements: 1) For the ultrasonic level sensor, measurement of the frequency of the echo signal allows the liquid level to be inferred.?2) Bourdon tubes are highly sensitive than the Bellows in the lower-pressure range of 0-30 psi.?3) A single-turn pot (350°) has a linearity error of 0.1% and is connected to a 2 Vdc source, so the maximum angle error that could be expected from this system is 0.25o.?
In the field of air pollution control, one often needs to sample the quality of a moving airstream. In such measurements a sampling probe is aligned with the flow as sketched in Fig. A suction pump draws air through the probe at volume flow rate V· as sketched. For accurate sampling, the air speed through the probe should be the same as that of the airstream (isokinetic sampling). However, if the applied suction is too large, as sketched in Fig, the air speed through the probe is greater than that of the airstream (super iso kinetic sampling). For simplicity consider a two-dimensional case in which the sampling probe height is h = 4.58 mm and its width is W = 39.5 mm. The values of the stream function corresponding to the lower and upper dividing streamlines are ?l = 0.093 m2/s and ?u = 0.150 m2/s, respectively. Calculate the volume flow rate through the probe (in units of m3/s) and the average speed of the air sucked through the probe.