An unbalanced delta-connected load is supplied from a 400-V, 3-ph, delta-connectedalternator through conductors having impedances of 4 + j3 2. The load consists of Zab=15/30°, Zbc = 30/45°22 and Zca = 30/60°. The source phase sequence is ABC withECA as the reference phasor. Determine the line currents and the voltage Vab of the load.Express your answers in polar form.

Delta connection is a mesh type connection made to the electrical apparatus and the three phase…

An unbalanced delta-connected load is supplied from a 400-V, 3-ph, delta-connected alternator through conductors having impedances of 4 + j3 02. The load consists of Zab= 15/30°, Zbc = 30/45°22 and Zca = 30260°02. The source phase sequence is ABC with ECA as the reference phasor. Determine the line currents and the voltage Vab of the load. Express your answers in polar form.

An unbalanced delta-connected load is supplied from a 400-V, 3-ph, delta-connected alternator through conductors having impedances of 4 + j3 02. The load consists of Zab= 15/30°, Zbc = 30/45°22 and Zca = 30260°02. The source phase sequence is ABC with ECA as the reference phasor. Determine the line currents and the voltage Vab of the load. Express your answers in polar form.

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.51P: A three-phase line with an impedance of (0.2+j1.0)/ phase feeds three balanced three-phase loads...

See similar textbooks

Similar questions

A three-phase line with an impedance of (0.2+j1.0)/ phase feeds three balanced three-phase loads connected in parallel. Load 1: Absorbs a total of 150 kW and 120 kvar. Load 2: Delta connected with an impedance of (150j48)/phase. Load 3: 120 kVA at 0.6 PF leading. If the line-to-neutral voltage at the load end of the line is 2000 v (rms), determine the magnitude of the line-to-line voltage at the source end of the line.
A three-phase, 3-wires CBA System alternator, sending 3-phase voltages of 339.4 volt to the lines, having a delta connected load, with VCA is the reference vector. ZBC = 12.99 – j7.5 ZCA = 8.66 + j5 ZAB = 10 + j0 Determine the phase and line current b) draw the phasor diagram and c) true power generates by the generator neglect the line losses.
In a balanced 3-phase system, the effective value of the IbB current for a triangular connected load is known as 15 (-150 degrees) Amperes and the effective value of the VCA voltage is known as 60 (90 degrees) Volts. Since it is known that the phase sequence is positive; Phase current IAB= 8.660 (60 degrees) A Phase current IAC= [Select ] Load impedance Z= [Select ] the total average power sent to the 3 phase load is Pt Aggregate= [Select ] (Note: Perform your operations using at least 3 digits after the comma.)
An unbalanced delta-connected load is supplied from a 400-V, 3-ph, delta-connected alternator through conductors having impedances of 4 + j3 ohms. The load consists of Zab = 15<30 ohms, Zbc=30<45 ohms and Zca = 30<60 ohms. There is no neutral connection. The phase sequence is ABC with Eca as the reference phasor. Determine the line currents and the voltage between the star-point of the alternator and that of the load. Express your answers in polar form.
Shown are two buses connected via a transmission line. Connected to Bus 1 is a generator(modelled as a voltage source V1), and to Bus 2 is a generator( with Voltage V2) and a load. The line impedance Z = R + jX is not known. Three-phase load is forecasted as 100MW + 60MVar. Generator at Bus 2 is scheduled to deliver 40MW and its excitation is adjusted for the machine to deliver 55 MVar. Voltage at Bus 1 is 241 KV angle 10 deg, while voltage at bus is 230 kV; use V2 as the reference for all angles. 1. What is the current (RMS) in amperes drawn by the load connected to Bus 2? 2. How much real power (in MW) is delivered by the generator connected to Bus 1? 3. What is the total real power loss along the line, in percent of the load? 4. What is the X/R Ratio of the line impedance?
low voltage systems In the circuit given below, single-phase powers connected to the single-phase network are given. If the effective value of the applied voltage is 220 V, the amplitude of the current drawn from the network(I) how many A?(Note: - sign indicates phasor state) A)142,85 B)119,34 C)129,16 D)137,86
1. An unbalanced, three-phase, delta-connected load, is supplied by an alternator three-phase system given in abc phase sequence in which Vbc is 220∠0° V. The load impedances Zab, Zbc, and Zca are given as 5∠60°, 10∠0°, and 15∠−20° Ω, respectively. Determine the following: (a) The phase currents Iab, Ibc, and Ica (b) The line currents Ia, Ib, and Ic (c) The powers absorbed by the individual impedances of the load (d) The total power absorbed by the load (e) The power recorded on each wattmeter assuming line B is the common.
Under balanced operating conditions, consider the 3-phase complex power delivered by the 3-phase source to the 3-phase load. Match the following expressions, those on the left to those on the right. 0) Real power, Py (ii) Reactive power, Qu (ii) Total apparent power Sy (iv) Complex power, Sy (a) (V3 VLL. IL)VA (b) (V3 Vu sng) var (e) (V3 VLL. IL cos ø) W (d) Py +Qy Note that VLL is the rms line-to-line voltage, IL is the ms line current, and o is the power-factor angle.
S.1) The serial impedance per phase of a three-phase 45 km energy transmission line is 2 + j4 / phase. A load with a power factor of cos2 = 0.8 forward is fed from the end of the line. Since the line voltage at the beginning and end of the line of the energy transmission line is wanted to be kept constant at 115 kV, a) Active and reactive powers drawn from the beginning and end of the line, b) Calculating the power consumed along the energy transmission line and the efficiency of the line. S.2) Line constants of an energy transmission line are given as A = D = 0.8746 + j0, B = 0 + j128.34, C = j0.0018316 S. At the beginning of the line, it is desired to write 1920 MW active power and 600 MVAr reactive power lines under 7650kV line voltage. According to this business, a) Calculate the line end magnitudes (U2, I2 and P2). b) What value does the end voltage take when the load fed from the end of the line is deactivated? S.3) The length of a phased energy transmission line with a…
Can you please solve the d e f parts? Three symmetrical three-phase loads are connected in parallel. Load 1 is connected in Y with an impedance of 400 + j300Ω / φ, load 2 is connected in with with an impedance of 2400 - j1800Ω / φ and load 3 is evaluated at 172.8 + j2203.2 kVA. Loads are supplied from a distribution line with an impedance of 2 + j16Ω / φ. Size of the voltage between the line and the neutral conductor at the end of the charge the line is 24√3 kV. The operating frequency is 50 Hz.(a) Calculate the line currents and the phase currents of the loads.(b) Calculate the total complex power at the receiving end of the system.(c) Calculate the total complex power at the transmitting end of the line.(d) Calculate the values of the compensation capacitors which are connected from the line to the neuron at the load end of the system so that the power factor at the load end reaches pf ≥ 0.98.(e) What if the capacitors are connected from one line to another? What would be the best…
Given: A balanced-Y load is in parallel with a balanced-D-connected capacitor bank. The Y load has an impedance ZY=(3+j4) Ω per phase, and Its neutral is grounded through an inductive reactance Xn = 2 Ω. The capacitor bank has a reactance XC = 30 Ω per phase.Draw: the sequence networks for this load and calculate the load-sequence impedances.
A 3-phase Y-connected load draws power from a 3-phase Y-connected source. The source voltage, ?=440∠0º?_rms and the load impedance, Z_y=(30+j15) Ω. The line impedance, Z_line= (1+j1)Ω and the system operates at 60 Hz. a) Draw the single-phase equivalent circuit and label all given quantities numerically. b) Calculatethe rms line (phase) current phasor in each phase. c) Calculate the total active or real power supplied by the source. d) Calculate the total active or real power consumed by the load. e) Calculate the total line loss i.e. the total activepower lost due to line. f) Determine the power efficiency of the system.