An undisturbed soil sample that is cylindrical in shape and measures 3 in (76.2 mm) in diameter by 6 in (152.4 mm) in length after oven drying weighs 2.57 lb (1.166 kg bulk) as opposed to 3.04 lb (1.38 kg mass). What are the densities and the weights in (a) wet and dry units? Additionally, find out the moisture content.

An undisturbed soil sample that is cylindrical in shape and measures 3 in (76.2 mm) in diameter by 6 in (152.4 mm) in length after oven drying weighs 2.57 lb (1.166 kg bulk) as opposed to 3.04 lb (1.38 kg mass). What are the densities and the weights in (a) wet and dry units? Additionally, find out the moisture content.

Fundamentals of Geotechnical Engineering (MindTap Course List)

5th Edition

ISBN:9781305635180

Author:Braja M. Das, Nagaratnam Sivakugan

Publisher:Braja M. Das, Nagaratnam Sivakugan

Chapter5: Soil Compaction

Section: Chapter Questions

Problem 5.2P

See similar textbooks

Similar questions

Calculate the coefficient of permeability of a soil sample of 6 cm is height and 50cm2 in cross sectional area, if the quantity of water equal to 450ml passed down in 10minutes under an effective constant head of 40cm. On oven drying, the test specimen weigh 495g. Take Gs as 2.65, calculate the seepage velocity of water during test.
- Find the moisture content, using dry weight per trial based on the table. - Solve the mean, sd, and rsd of the measurements. Description Trial 1 Trial 2 Trial 3 Trial 4 Weight of empty watch glass (g) 38.1151 38.1474 38.9473 38.7400 Weight of watch glass and soil sample (g) 90.1440 85.7554 86.6980 85.1235 Weight of watch glass and dry soil 67.0170 64.1915 65.1110 63.8859
A WET OF SOIL SAMPLE HAS A VOLUME OF 4.85 x 10^-4 m3 AND WEIGHS 8.5N. AFTER OVEN DRYING, THE WEIGHT REDUCES TO 7.5N. IF sg = 2.7DETERMINE THE UNIT WEIGHT. DETERMINE THE MOISTURE CONTENT. DETERMINE THE DEGREE OF SATURATIONAnswer in 4 decimal places with unit
PLS ANSWER ASAPA WET OF SOIL SAMPLE HAS A VOLUME OF 4.85 x 10^-4 m3 AND WEIGHS 8.5N. AFTER OVEN DRYING, THE WEIGHT REDUCES TO 7.5N. IF sg = 2.7DETERMINE THE UNIT WEIGHT. DETERMINE THE MOISTURE CONTENT. DETERMINE THE DEGREE OF SATURATIONAnswer in 4 decimal places with unit
You are checking a field-compacted layer of soil. The laboratory control curve has the following values: gd (kN/m3) w (%) 16.34 14 16.57 16 16.65 18 16.50 20 16.26 22 15.87 24 The specification for compaction states that the field-compacted soil must be at least 95% of the maximum control density and within of the optimum moisture for the control curve. You dig a hole 1m3 in the compacted layer and extract a sample that weighs 17.2 kN wet and 14.1 kN dry. (a) What is the compacted gd? The compaction w? The percent compaction? Does the sample meet the specifications? (b) If the specific gravity is 2.68, what is the compacted degree of saturation? If the sample were saturated at constant density, what would be the water content?
Calculate the coefficient of permeability in mm/s of a soil sample, 6 cm in height and 50 cm2 in cross sectional area, if a quantity of water equal to 430 ml passed down in 10 minutes, under an effective constant head of 40 cm. a.625 X 10^-2 b.5.9 x 10^-2 c.1.6 X 10^-5 d.2.15 x 10^-2
A sample of the soil tested in triaxial with dimensions of 38 mm diameter and 76 mm height, its weight afterthe test was 205.1 g and after drying in an oven the weight was 175.6 g, determine the moisture content,bulk and dry densities and unit weights. 1- Analyse the results of liquid limit, plastic limit and plasticity indices determined 2- What is the importance of specific gravity, in the given examples?
2A sample of soil obtained from a borrow pit has a wet weight of 16 kg.The total volume occupied by the sample when in the ground was8490cm. A small portion of the sample is used to determine the watercontent. The wet sample weighs 150g. After drying, it weights 125g (a) What is the water content of the sample?(6) Determine the wet and the dry unit weights of the soil in the borrowpit.
A cylindrical soil sample 50 mm in diameter and 200 mm in height is used as thepermeameter in a falling head permeability test setup. In one minute of observation, thehydraulic head in the 10 mm diameter standpipe through which test water went reducedfrom 900mm to 500 mm. During that time, 1.5 liters of water were collected in the graduate. Calculate the soil sample's permeability coefficient in cm/s.
A 50 mm diameter and 90 mm-long silty clay sample was subjected to a falling head permeameter test using a setup similar to the one shown in Figure 6.4b, where the inner diameter of the standpipe was 3.0 mm. The head dropped from 870 mm to 450 mm in 5 minutes. What is the permeability of the sample?
Question 30 The data from a falling head test is shown. Diameter of standpipe: 6 cm. Initial Head: 90.4 cm. Duration of test: 18 min. Length of soil sample: 30.35 cm. Diameter of permeameter: 44 cm. If the soil permeability is 0.0038 cm/min, determine the final head (in cm.) of the permeability test. Round off to two decimal places.
Sketch the figure and determine coefficient of permeability (k) in mm/min using constant head permeability, given the following data, Water flows horizontally The height of the reservoir supply source is 2 m above the elevation of the outlet. The soil sample length in the direction of water flow is 200 mm. The cross-sectional area of the soil sample is 1,950 mm2. The measured volume of flow for the steadystate condition is 500 ml in a 10-minute time period.