Analyze the beam shown below if the loads are as follows: P = 180 kN w = 23 kN/m M = 215 kN.m a. Which of the following most nearly gives the reaction at the roller support in kN [ Select ] b. Which of the following most nearly gives the reaction at the hinge support in kN [ Select ] M 4 m 3 m

Analyze the beam shown below if the loads are as follows: P = 180 kN w = 23 kN/m M = 215 kN.m a. Which of the following most nearly gives the reaction at the roller support in kN [ Select ] b. Which of the following most nearly gives the reaction at the hinge support in kN [ Select ] M 4 m 3 m

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Determine the reactions at a and b for the beam subjected to the concentrated loads Ay= ? (Not 8.77 or 4.85 previous failed attempts on my behalf) bx = 7.2 Ax = ? (Not 1.9 or -.3365)
2. The beam AB shown is supported at A and B. the beam is loaded with three fixed concentrated loads and an overhead hoist carrying a load W. P1 P2-320 KN. P3-200 KN and W-500 KN A. Find the distance of W from A in meters if the resultant of the external loads is at the midspen B. What is the reaction at A when W is at midspan?
(2) sz The bar ABCD is fixed at A by a pin and supported by two wires as shown in fig. the bar is subjected to aload of 75 kN at D. the relation between the movement of point N BtoDis TSN 36B =2 8D 26B =3 6D 8B =4 6D None of all these 26B = 8D O OOO0O0
For the given loads w = 36 KN/m and M=90 KN.m is supported as shown by a roller at D and a hinge at D 1- Magnitude of reaction at D is (KN) : (a. 72 - b. 180 - c. 144 - d. 216 - e. 252 ) 2- Magnitude of reaction at A is (KN): (a. 72 - b. 108 - c. 252 - d. 36 - e. 180 ) 3- Bending moment just to the right of B (KN.m) : (a. -36 - b. -54 - c. -72 - d. -90 - e. -108) 4-Find Shear force just to the right of D 5- Find Shear force just to the left of D 6- Find Maximum absolute value of bending moment (KN.m) is
please help! upvote will be given. NO LONG EXPLANATION NEEDED STRENGTH OF MATERIALS The compound shaft carries the two torques shown. The shear moduli are 28 GPa for aluminum, 83 GPa for steel, and 35 Gpa for bronze. If T = 1179.9 Nm, U = 4330 Nm, x = 3.03 m, y = 2.25 m, z = 1.34 m, d = 94 mm, and e = 76 mm, find the angle of rotation of the free end of the shaft. Round off the final answer to two decimal places.
Design a purlin for a roof truss having the following data:Span of the truss = 6.0mSpacing of truss = 3m c/c.Inclination of roof = 30oSpacing of Purlin = 2m c/cWind pressure = 1.5 kN/m2Roof coverage= A.C Sheeting weighing 200 N/m2Provide a channel section Purlin.
A 250mm x 300mm beam 7m long is supported at its end and its midspan. It carries a uniformloadof 9KN/m excluding its own weight. E = 13.8 GPA. Weight of wood is 9.5 KN/m^3. If the allowable deflection is12mm. a. Compute the reaction at Midspan
The beam shown in figure below carries a triangular load of 12 kN per meter at A to zero at B and a concentrated load 20 kN at C.1. Which of the following most nearly gives the reaction at B in kN?a. 38.67b. 22.53c. 17.33d. 12.542. Which of the following most nearly gives the maximum moment in kN-meter?a. 13.78b. 18.65c. 26.51d. 10.623. Which of the following most nearly gives the distance of the point of inflection from A in meters? a. 3.62 mb. 2.24 mc. 4.51 md. 1.86 m
The cantilever is statically indeterminate since there are 4 unknowns VA HA MA and VB to solve with only the 3 Rules becomes possible only if at least one action is given. Say for example we are given that MA = 71.65 kNm (hogging). Determine the 3 unknown reactions and on the diagram overleaf, draw the SFD and BMDs
The beam shown in the image attached is simply supported and subjected to the loads shown. If the reaction VA and VB are 14.67kN and 23.33kN respectivley, find the distance from the left hand support "A" to the point of contralexure.
Determine the required length of cord AC shown so that the 8-kglamp can be suspended in the position shown. The undeformed lengthof spring AB is l'AB = 0.4 m, and the spring has a stiffness of kAB = 300 N/m.
A beam-column has the following properties and loading: A992 W8x35 and an unbraced length of 10-ft. Pu = 160 kip. It is bent about its strong axis. The two ends are pinned, and the beamcolumn is part of a braced frame (BF) system. Take Cb = 1.14. Take the moment modification factor, B1, to be 1.06 to assist you in determining the magnified moment (Mr) from the factored moment with no translation (Mnt). What is the maximum factored bending moment (Mu) that can be applied to the beam-column and still meet AISC Equation H1-1a?