and 1. A cylindrical container whose weight is 65 N is inverted a pressed into the water, as shown in figure. Determine the differential height h of the manometer and the force F needed to hold the container at the position shown. F Air D=25cm A. 9.83 cm & 25.42 kN B. 9.07 cm & 34.15 kN A Manometer Fluid SG = 2.1 20cm B C. 9.34 cm & 27.79 kN D. 9.52 cm & 31.31 kN Water

and 1. A cylindrical container whose weight is 65 N is inverted a pressed into the water, as shown in figure. Determine the differential height h of the manometer and the force F needed to hold the container at the position shown. F Air D=25cm A. 9.83 cm & 25.42 kN B. 9.07 cm & 34.15 kN A Manometer Fluid SG = 2.1 20cm B C. 9.34 cm & 27.79 kN D. 9.52 cm & 31.31 kN Water

Name: and1. A cylindrical container whose weight is 65 N is inverted apress
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: and1. A cylindrical container whose weight is 65 N is inverted apressed into the water, as shown in figure. Determine thdifferential height h of the manometer and the force F needed tohold the container at the position shown.AirD=25cmA. 9.83 cm & 25

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter8: Centroids And Distributed Loads

Section: Chapter Questions

Problem 8.122P: The 12-ft wide quarter-circular gate AB is hinged at A. Determine the contact force between the gate...

See similar textbooks

Similar questions

One side of the container has a 03-m square door that is hinged at its top edge. If the container is filled with water, determine the smallest force F that must be applied to the bottom edge of the door to keep it closed.
A long solid cylinder of radius 0.8 m hinged at point A is used as an automatic gate, When the water level reaches 5 m, the gate opens by turning about the hinge at point A. Determine (a) the hydrostatic force acting on the cylinder and its line of action when the gate opens and (b) the weight of the cylinder per m length of the cylinder.
A long, solid cylinder of radius 2 ft hinged at point A is used as an automatic gate, as shown in the figure below. When the water level reaches 15 ft, the cylindrical gate opens by turning about the hinge at point A. Determine (a) the hydrostatic force acting on the cylinder and its line of action when the gate opens. (b) the weight of the cylinder per ft length of the cylinder.
A 1-kg cube of wood floats in an upright position in fresh water. If a side of the cube measures 12.5 cm, determine the pressure acting at the bottom of the cube due to the water. How deep is the cube floating?
A cylindrical disk ofwood weighing 45.0 N and having adiameter of 30.0 cm floats on a cylinderof oil of density 0.850 g /cm3(Fig.). The cylinder of oilis 75.0 cm deep and has a diameterthe same as that of the wood.(a) What is the gauge pressure at thetop of the oil column? (b) Supposenow that someone puts a weightof 83.0 N on top of the wood, butno oil seeps around the edge of thewood. What is the change in pressureat (i) the bottom of the oil and(ii) halfway down in the oil?
A gate which is hinged at O with a constant width of 5m and water depth of 4m to the right of the gate.determine the magnitude of hydrostatic force required to maintain the gate in equilibrium
6-m-wide rectangular gate shown is hinged at B and leans against the floor at A making an angle of 45° with the horizontal The gate is to be opened from its lower edge by applying a normal force at its center. Determine the minimum force F required to open the water gate.
A rectangular gate (h = 3 m high, w = 6 m wide) is hinged at the top edge at A, which is a = 2 m under the water surface, and is restrained by a fixed ridge at B. Determine the hydrostatic force in kN in the horizontal direction exerted on the gate by the water. (water density 1000 kg/m^3 , g=9.81 m/s^2)"
Open tank (4.5 m long, 2.5 m height and 3 m wide) contains liquid (S-0.75) to height 1. m. If this tank is accelerated along its length on a horizontal truck at a constant value of 3.5 m/s, determine pressure at the bottom of the tank at front and rear edges (in kN/m). (take y=9.8 kN/m for water)
Find the position of centre of buoyancy for a wooden block of width 5 m and depth 1 m, when it floats horizontally in water. The density of wooden block id 850 kg/m3 and its length 4.0 m.
An open tank 2 m x 4 m rectangular horizontal section has anegligible weight and contains water to a depth of 1.5 m. It is actedupon by an unbalanced force of 50 kN parallel to longer side so thatwater is about to spill. If the tank is closed and theacceleration is increased by 4 m/s ², determine the new unbalancedforce if the pressure on the surface is 30 kPa.
In Fig. , vertical, unsymmetrical trapezoidal panelABCD is submerged in fresh water with side AB 12 ft belowthe surface. Since trapezoid formulas are complicated,( a ) estimate, reasonably, the water force on the panel, in lbf,neglecting atmospheric pressure. For extra credit, ( b ) lookup the formula and compute the exact force on the panel.