As shown in Figure 1, a vertical piston-cylinder assembly containing a gas is placed on a hot plate. The piston with a mass of 43 kg initially rests on the stops. With the onset of heating, the gas pressure increases. At what pressure, in bar, does the piston start rising? The piston moves smoothly in the cylinder and g=9.81 m/s2. Patm = 1 bar Stops- Piston -A = 0.01 m? Gas Hot plate Figure 1: A vertical piston-cylinder assembly Answer:

As shown in Figure 1, a vertical piston-cylinder assembly containing a gas is placed on a hot plate. The piston with a mass of 43 kg initially rests on the stops. With the onset of heating, the gas pressure increases. At what pressure, in bar, does the piston start rising? The piston moves smoothly in the cylinder and g=9.81 m/s2. Patm = 1 bar Stops- Piston -A = 0.01 m? Gas Hot plate Figure 1: A vertical piston-cylinder assembly Answer:

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Two pistons of a hydraulic lift have diameters of 60 cm and 5 cm. What is the force exerted by the larger piston when 50 N is placed on the smaller piston?
A vertical piston-cylinder assembly contains 0.5 kg of water. Initially, the piston is resting against the stops when the water pressure and temperature are 1.00 bar and 100°C, respectively. The piston has a mass of 50 kg and face area of 0.01 m2; local atmospheric pressure is 1.01 bar; local gravitational acceleration is 9.81 m/s2 (5) What water pressure would be required to lift the piston from the stops? (3) Thinking about water as the system, is the system best described as open, closed, or isolated? Why? (3) Are changes in kinetic and potential energy negligible for the system in this case? Why? (5) How much heat transfer must occur to the water in order to begin to lift the piston from the stops? (2) Once the piston is lifted from the stops, will the water pressure change? Why? (5) Assuming that the water's pressure remains constant, find the work for the volume to double in kJ. Carefully indicate the direction (i.e., what is the work that you reported being done on or…
A man is standing on a board on a frozen lake where there is no friction between the board and the ice surface. Tha man's mass is 2 m and the boaf's mass is 4 m. The board has length L. He walks from 1/5 Lfrom the left end of the board to 1/5 L from the right end of the board. How far and in which direction does the board move during this process?
As shown in the figure below, a hydraulic system has two pistons of different diameter and uses a liquid of density ? = 850 kg/m3. The smaller piston has a diameter of 5.5 cm and a mass of 1.6 kg and the larger piston a diameter of 14 cm and a mass of 2.8 kg. Determine h, the height difference between the two pistons.
1. A gas is confined in a 3.98ft diameter cylinder by a piston, on which rests a weight. The mass of the piston 7.25lbm and weights is 270lbm. (a) What is the force in lbf exerted on the gas by the atmosphere, the piston, and the weight, assuming no friction between the piston and cylinder? (b) What is the pressure of the gas in psia? (c) If the gas in the cylinder is heated, it expands, pushing the piston and weight upward. If the piston and weight are raised 2.2ft, what is the work done by the gas in ft-lbf? What is the change in potential energy of the piston and weight?
Help me with this thermodynamics problem
A box with a mass of 3m is on frictionless ground, attached to a wall (on the left-side of the box) by a spring with constant k. Inside the box (on the frictionless floor of the box), is a block of mass m. The block is also attached to the left-side of the box (but inside it), by a second spring, with a spring constant 2k/5.1) What are the F = ma equations for the box and the block? (Remember how the motion of each, affects each other)2) What are the matrices K and M for the system?3) What are the normal frequencies of the system?4) Describe the motion of the masses. In phase? Out of phase? Does one mass oscillate with a higher amplitude than the other?
The attached figure shows a gas contained in a vertical piston– cylinder assembly, where D = 10 cm. A vertical shaft whose cross-sectional area is 0.8 cm2 is attached to the top of the piston. The total mass of the piston and shaft is 25 kg. While the gas is slowly heated, the internal energy of the gas increases by 0.1 kJ, the potential energy of the piston–shaft combination increases by 0.2 kJ, and a force of F = 1668 N is exerted on the shaft as shown in the figure. The piston and cylinder are poor conductors, and friction between them is negligible.The local atmospheric pressure is 1 bar and g = 9.81 m/s2. (Patm = 1 bar) Determine, (a) the work done by the shaft, (b) the work done in displacing the atmosphere, and (c) the heat transfer to the gas, all in kJ.
In a horizontal tube, its initial section is A1 = 800 cm2 , which reduces to A2 = 600 cm2 at the end of the tube. The mass amount is 0.1 slug/s of air (p = 1.25 kg/s). Assuming ideal fluid flow and steady state, calculate the pressure difference between A1 and A2. Answer:p1 - p2 = 1.75 kgf/m2
Q.3 What do you understand by Coefficient of Volume Expansion? Explain in detail.
what is the effect of 1- gravity (g), 2- (m/l) on the value of the rate or spring constant (K)
Determined the change in internal energy if there are 2kg of gas inside a rigid container, for which R=240J/kg-K (k=1.50), initial pressure P1= 500.16kPa and temperature and T1 = 70C, then pressure increase to 1675kPa.