can you please find the solution for this question.also free body diagram and units check is needed JAs shown in the figure below, a Metal Part (Object 2) is submerged in water (@ 15°C) and suspended from apartially submerged Wood Block (Object 1) by a cable.Calculate:1. the mass, M2, of the Metal Part in units of grams2. the tension, 7, in the cable in units of N.Neglect the volume of the cable.At least two Free Body Diagrams (FBD's) will be required to solve for both m2 and T.Draw and label FBD's in your analysis,•The values will be small due to the small size of the parts. Trust your calculations.Unit checks are critical.Wood Block:50 x 50 x 10 mm) 2.5 mmSgWB 0.30010 mm(2)H,0, 15°CMetal Part6600 mm2

Answered: Image /qna-images/answer/dbe02ab4-6929-488b-9e1f-ef129027f31a.jpg

) As shown in the figure below, a Metal Part (Object 2) is submerged in water (@ 15°C) and suspended from a partially submerged Wood Block (Object 1) by a cable. Calculate: 1. the mass, m2, of the Metal Part in units of grams 2. the tension, T, in the cable in units of N. Neglect the volume of the cable. At least two Free Body Diagrams (FBD's) will be required to solve for both m2 and T. Draw and label FBD's in your analysis. The values will be small due to the small size of the parts. Trust your calculations. Unit checks are critical. Wood Block: 50 x 50 x 10 mm 1) 2.5 mm S9WB = 0.300 10 mm (2) H20, 15°C Metal Part: 6600 mm3

) As shown in the figure below, a Metal Part (Object 2) is submerged in water (@ 15°C) and suspended from a partially submerged Wood Block (Object 1) by a cable. Calculate: 1. the mass, m2, of the Metal Part in units of grams 2. the tension, T, in the cable in units of N. Neglect the volume of the cable. At least two Free Body Diagrams (FBD's) will be required to solve for both m2 and T. Draw and label FBD's in your analysis. The values will be small due to the small size of the parts. Trust your calculations. Unit checks are critical. Wood Block: 50 x 50 x 10 mm 1) 2.5 mm S9WB = 0.300 10 mm (2) H20, 15°C Metal Part: 6600 mm3

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter5: Analysis Of Convection Heat Transfer

Section: Chapter Questions

Problem 5.5P: Evaluate the dimensionless groups hcD/k,UD/, and cp/k for water, n-butyl alcohol, mercury, hydrogen,...

See similar textbooks

Similar questions

A commpon way of salvaging cannons from old wreacks is to attach an inflatable balloon filed with air. Assume that the cannon is a solid cylinder of iron which is 1.30m long with a radius 17.3cm. The density of iron is 7.87g/cm^3. a. If an air bag were filled twice the volume necessary, what will be the tension in the rope between the air bag and the cannon when the air bag reaches the surface and comes to rest? What volume of air bag wil be floating above the water surface?
A 0.5-m diameter helium (Density of He = 0.18 kg/m3) balloon is attached by a rope to the bottom of a 10-m deep freshwater lake (Fig. 1). Given that the rope can sustain a maximum tensile force of 300 N, would it be able to secure the balloon? Please clearly illustrate your free-body diagram.
The surface tension of water in air is approximately 0.0072lbf/ft. If the atmospheric pressure is 14.7 psia, what is the pressure inside a droplet 0.5 mm in diameter?
A column arranged vertically holds a composite fluid of 18 in of mercury (SG = 13.6), 26 in of water (density = 998 kg/m^3), and 32 in of oil(SG = 0.9), with its top end exposed to the atmosphere. Calculate the pressure in psia at the bottom of the column. Knowing that fluids with higher densities sit below fluids with lower densities, illustrate the vertical column(no need to be up to scale). With solutions please.
A cube with edges of length L = 0.23 m and density ρc = 3.4×103 kg/m3 is totally submerged in water, with a density of ρw = 1.00×103 kg/m3, and oil, with a density of ρo = 0.82×103 kg/m3, as shown in the figure. The cube is submerged in the water to a depth of d = 0.065 m, while the rest of the cube is in oil. The cube is suspended by a taut string and is in static equilibrium. a) Calculate the magnitude of the buoyant force, in newtons. b) Enter an expression for the tension in the string, in terms of the defined quantities and g.
In celebration of the end of term, see the symmetric wine glass of 300 g mass, as shown below.Note that the wine is frozen because you left the glass outside. What is the maximum force magnitude P that can be applied to the glass before movement occurs? What kind of movement will occur? What kind of movement will occur if the base is changed to be 120 mm wide, themass of the glass increases to become 400 g, and μs = 0.2?
Calculate the maximum diameter (mm) of a steel ball that would float on water at 15°C. At 15°C, σ = 0.0741 N/m. Take density of steel = 7763 kg/m3.
A glass tube of 2.5 mm internal diameter is immersed in oil of mass density 940 kg/m^3 to depth of 9 mm. If a pressure of 148 N/m^2 is needed to form bubble which is just released. What is the surface tension of oil?
Solve Correctly A cylinder object is suspended in a liquid at a distance of 38cm below the surface. The diameter of the object is 140cm and the density of the object is 960 kg/m3. The density ratio is 1. Determine the height of the cylinder, if the buoyant force is 7N.
A spherical neutrophil 16µm in diameter is resting as shown in the attached photo. The pressure difference between the inside and outside of the cell is 7.5Pa. a) Draw free body diagrams of the whole cell and one hemisphere of the cell. b) Calculate cortical tension in the cell. In a micropipette aspiration experiment, a suction pressure of 52.5 Pa was used to aspirate the neutrophil membrane. c) Draw free body diagrams of the whole cell under micropipette aspiration and the portion of the cell in the micropipette. What is the diameter of the micropipette tip used to make this hemispherical projection? Next, the micropipette aspiration was stopped, and the cell was treated with Cytochalasin D, an inhibitor of actin polymerization, causing the cortical tension to decrease by half. d) Assuming the pressures inside and outside the cell have not changed, what is the new cell radius? e) If the same micropipette was used to aspirate the cell, what would be the new suction pressure?
In the Figure below, the cover gate AB closesa circular opening 80 cm in diameter. The gate is held closed by a 200-kg mass as shown. Assume standard gravity at 20 °C. At what water level (h) will the gate be dislodged? Neglect the weight of the gate. Specific weight of water 9790 N/m3
A cube 2.2 feet on an edge has its lower half of s.g. = 4.8 and upper half of s.g. = 2.9. It rests in a two-layer fluid, with lower sg. = 4.6 and upper s.g. = 3.95. Determine the height, h, of the top of the cube above the interface. See the Figure below. Note: Show step-by-step, and explain each step.