Bar A-B-C is made from a fully bonded composite of twomaterials as shown in the cross section below. Find the Zdisplacement at point C.AC1.10 m20 kNB1.25 m50 kNсYI cross section c-cUz =5 mm, material 15 mm, material 25 mm, material 125 mmMaterial 1E = 240 (GPa)Material 2E = 180 (GPa)mm (at C)

Answered: Image /qna-images/answer/e0e160ba-7087-4974-a0d4-33a4a037fe85.jpg

Answered: Bar A-B-C is made from a fully bonded…

Bar A-B-C is made from a fully bonded composite of two materials as shown in the cross section below. Find the Z displacement at point C.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A composite bar is made of Steel & Aluminium strips each having 3 cm² area of cross-section. The composite bar is subjected to an axial load of 12000 N. If Esteel = 3EÃ¡, the stress in steel is
A composite bar BCD has a uniform external radius R. = 9cm. Segment BC is solid steel, while segment CD is composed of a copper core of radius R:= 1cm bonded inside a steel sleeve. The lengths of the two segments are LBc= 2 m and LcD= 1 m. The material moduli are Etei= 200 GPa and Ecope= 100 GPa. The bar is fixed at B and tensile loads are applied at section D (F»= 1000 kN) and at section C (Fc=400 kN). Compute the following: Determine the axial stress of steel in segment CD in MPa. 2m B 1m D 400 KN 1000 KN
An engineer is designing a beam to support a flooring system above it, as well as two walls. The beam will be a T-section, though the engineer is considering the idea of combining timber and steel to create a composite member for the application. The dimensions of the T-section beam are shown below: dw The dimensions of the T-section beam are shown below: bf Flange (horizontal section of cross-section): • bf = 340 mm tf = 15 mm ● Walls Flooring Beam
A composite beam is made of two brass [E = 120 GPa] bars bonded to two aluminum [E = 70 GPa] bars, as shown. The beam is subjected to a bending moment of 400 N-m acting about the z axis. Using a = 15 mm, b = 100 mm, c = 30 mm, and d = 65 mm, calculate (a) the maximum bending stress in the aluminum bars. (b) the maximum bending stress in the brass bars. Aluminum y Brass Aluminum b Brass C a d
A composite beam made of steel and bronze has the cross section shown. The cross-sectional dimensions are b1 = 0.5 in, b2 = 1.5 in., and d = 1.0 in. The elastic modulus of the steel is E1 = 30,000 ksi, and its allowable bending stress is 24 ksi. The elastic modulus of the bronze is E, = 15,000 ksi, and its allowable bending stress is 16 ksi. Calculate the magnitude of the allowable bending moment that can be applied about the z centroidal axis. y Bronze (2) Steel (1) bị b2 Answer: M = i Ib-in. Save for Later Attempts: 0 of 1 used Submit Answer
Q1 A cantilever composite beam is formed by bonding together brass bar (EB = 100 GPa) and aluminium (EA = 70 GPa) with cross section and loading at free end as shown in Figure Q1. Parameter x, y, and z are given by: X=0 Y=0 Z=2 (a) Determine the centroid and the moment of inertia of the composite section. (b) Calculate the maximum tensile and compressive stresses in the brass and aluminium. brass 5x mm (10 mm 20mm |4y mm 0.5(4y) mm M=2.z kN.m 4y mm aluminium Figure Q1 |
REACTION OF A RIGID PLATE II A) Determine the internal and external reaction forces of a composite structure. To check the solution you will need to specify reaction components Ax, Az, Ma, Bx, Bz (body II), Cx, Cz (body III), Dx, Dz, Ex, Ez (body IV), Fx, Fz (body V), G (force transmitted by the member gj), H (force transmitted by the member hj), Kx, Kz. coefficient's are a= 1,1 b= 0,6 c=1.1
A composite beam is made of two brass [E = 112 GPa] bars bonded to two aluminum [E = 69 GPa] bars, as shown. The beam is subjected to a bending moment of 350 N-m acting about the z axis. Using a = 15 mm, b = 115 mm, c = 25 mm, and d = 65 mm, calculate (a) the maximum bending stress in the aluminum bars. (b) the maximum bending stress in the brass bars. Z Aluminum с Aluminum Answers: (a) Jal= (b) Obr= Brass i y i b Brass a a MPa MPa
A composite bar BCD has a uniform extemal radius R, = (x+2) cm. Segment BC is solid steel, while segment CD is composed of a copper core of radius R;= 1cm bonded inside a steel sleeve. The lengths of the two segments are Lgc = 2 m and LCD= 1 m. The material moduli are Esel = 200 GPa and Ecoper = 100 GPa. The bar is fixed at B and tensile loads are applied at section D (FD = 1000 kN) and at section C (Fc = 400 kN). Compute the following: 1. Axial stress of steel in segment BC in MPa. 2. Axial stress of steel in segment CD in MPa. 3. Axial stress of copper in segment CD in MPa. 4. Total elongation of the assembly in mm. 2m в 1m 400 KN 1000 KN