BP3: A simply supported rectangular beam with length= 5', height =5", and depth = 1" is loaded withdistributed load of 100 Ib/in over its entire length. Determine normal and shear stresses at a point 1' fromright and 1" from the top.

Answered: Image /qna-images/answer/c10d40e6-ef41-4be2-a66d-5a4f595c8fd2.jpg

BP3: A simply supported rectangular beam with length= 5', height =5", and depth = 1" is loaded with distributed load of 100 lb/in over its entire length. Determine normal and shear stresses at a point 1' from right and 1" from the top.

BP3: A simply supported rectangular beam with length= 5', height =5", and depth = 1" is loaded with distributed load of 100 lb/in over its entire length. Determine normal and shear stresses at a point 1' from right and 1" from the top.

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter8: Applications Of Plane Stress (pressure Vessels, Beams, And Combined Loadings)

Section: Chapter Questions

Problem 8.5.16P: A sign is supported by a pipe (see figure) having an outer diameter 110 mm and inner diameter 90 mm....

See similar textbooks

Related questions

Q: 10 mm Y 15 mm 30 mm 40 mm 10 mm 15 mm X

Q: 3. Water flows at the rate of 5 ft/s through an inclined pipe. At point A, where the diameter is 12 ...

A: Find the pressure at point B

Q: Step by Step An object has a denisty of 1.2 slug/ft^3 and a total volume of 12 ft^3. What is the we...

Q: 1) Consider the masses A and B with weight as shown. If the two systems are released from rest, whic...

A: Given

Q: (b) A jet of water, having a velocity of 30 m/s impinges on a series of vanes with a velocity of 15 ...

Q: A lunar excursion module (LEM) weighs 1500 kg on earth where g-9.75 mps2 Calculate Match each item t...

Q: An ordinary gasoline engine uses about 0.3 kg of fuel/kW-hr. What is the approximate therma efficien...

A: Given:5. m=0.3 Kg of fuel/KW.hr6. m=0.25 Kg/KW.hr

Q: A diesel engine has a bore of 4 in., a stroke of 4.3 in., and a compression ratio of 19:1 running at...

A: Engine cylinder bore, D=4 inEngine cylinder stroke, L=4.3 inCompression ration, r=19:1Engine speed, ...

Q: TRP TUNELE HA PEN TM AutoSave On Hwk-6a MechanialProperties-ElasticRegion Last Modified: Mon at 9.05...

A: Explaining the difference between tension and compression and also formulating the mathematical expr...

Q: 3.20 In Figure P3.20, a cart of mass M carrying a single pendulum (m,, L) moves vertically. Constrai...

A: Since you have posted a question with multiple sub-parts, we will solve the first three subparts for...

Q: Assess the stability and static determinacy of each of the following trusses. (a) (b) 00 (c) (d) 00 ...

A: Dear student, According to the guidelines I am allowed to answer only three sub-p...

Q: 13. An air turbine produces a shaft work of 35 kJ/kg. The conditions of the air entering and leaving...

Q: Ex Detormine the magnitude of the resultant force and ibs direction @ measured Counter Clockwise fro...

A: It is required to determine resultant force and it's direction

Q: A small projectile is fired vertically downward into a fluid medium with an initial velocity of 65 m...

Q: A mercury and a water barometer are put at the same location. The specific weight of mercury is , an...

Q: A swimming pool has a width of 4m and a side profile as shown. Determine the a. horizontal compone...

Q: ソーH 12 ft

A: As per given question Length of column=12 ft Stress=50 ksi We have to determine the largest axial l...

Q: c) Sketch the shear force diagram d) Sketch the bending moment diagram

Q: S6.2 Helium expands polytropically through a turbine at pV1.5 = C. Inlet is at 1000K and 1000 kPa. E...

Q: Link BC (of length 0.47 m) is pin connected at the fixed point C and makes an angle of ⍬ = 51° with ...

Q: The angle of rotation at the maximum deflection is: a. 0.5 b. 0 c. 2 d. 1

A: It is required to choose correct answer

Q: Problem 1A steel wire is 6 m long,, hanging vertically supports a load of 2000N. Neglecting the weig...

Q: A dryer is to deliver 1000 kg/hour of palay with a final moisture content of 10%. The initial moistu...

A: In the problem, there is a dryer used to minimize the moisture content of material i.e. palay( rice ...

Q: he resultant of three forces acting on rod at

Q: Problem 4 (a) Water from a water reservoir is delivered through a 2-cm pipe to a 200-litre tank as s...

Q: S were taken bservations n

Q: what is 3 dimensional heat conduction?

A: Heat conduction in practice can be in any direction provided there is a temperature difference betwe...

Q: Which of the following is the permissible working stress in psi of UNC bolts that has a stress area ...

A: Given Data: Stress area of the bolt, A=0.4 in2

Q: Express the repeating decimal as a fraction. 0.4444. . . =

A: Given decimal 0.4444..... is infinite therefore using infinite decimal to fraction technique

Q: A right circular cylinder has a height of 1 m and diameter of 75 cm. Find the view factor for the cy...

Q: An ideal dual cycle has a compression ratio of 14. At the start of the compression process, air is a...

A: Given data Compression ratio = 14At the start of the compression,Temperature , T1 = 300 KPressure = ...

Q: 1. The cantilever beam in Figure 1 is fixed at A, and is loaded with a distributed load from A to B ...

Q: (15) Consider the following inverted pendulum problem. Segway Balancing a stick Inverted pendulum Sk...

A: Given : To find : Block diagram

Q: Consider the homogeneous rectangular plate with side lengths a = 9cm and b = 5cm. At a certain insta...

A: Calculated speed of corner point A ( m/s). At this instant.

Q: 1. The cantilever beam in Figure 1 is fixed at A, and is loaded with a distributed load from B to C ...

Q: Young's modulus of elasticity and Poisson's ratio of a material are 1.25×10^5 MPa and 0.34 respectiv...

A: Given data: E=1.25×105 MPaμ=0.34 Need to determine the modulus of rigidity of the material.

Q: EX if the magnitude of the resultant force is to be goky directed a long the positive X-axis determi...

Q: ARED IS BE EGUIUmont complessivis =A ksi ECOろ Wihot MoY At loor compRESSION ヒ7PEZA 2- cAN Wt HAVING ...

Q: Problem 11. The problem below, consists of a rod with a circular cross-section embedded and bonded i...

A: (a) If the wall is replaced by spring, Material has length 'L' and radius 'R' elasticity ε Young's ...

Q: part B only please. thank you! 5. The following table shows joint position coordinates for the hip, ...

Q: In a nuclear power plant heat is transferred in the nuclear reactor to liquid sodium. The liquid sod...

A: Pump 1: Wp1 = 0.001008( 400 - 7.5 ) = 0.4 kJ/kg h2 = h1 + Wp1 = 168.8 + 0.4 = 169.2 kJ/kg Pump 2...

Q: Calculate the transverse thermal conductivity of coast type Douglas-fir, western hemlock, and black...

A: Dampness can exist in wood as fluid water (free water) or water fume in cell lumens and holes and as...

Q: Steam enters a turbine at 10,000 kPa and 500 °C, and exhausts at 100 °C with an enthalpy of 2000 kJ/...

Q: A solid circular drive shaft of length = 0.5 m, is to be designed to transmit up to 45000 W at 1800 ...

Q: We want to measure the flow rate of water at 20 C by a thin plate orifice. The pipe diameter carryin...

Q: 3. The antenna tower is supported by three cables. If the forces of these cables acting on the anten...

Q: What height of oil column will cause the pressure of 575kn/m2? What is the equivalent height of merc...

Q: A copper rod, 6 mm in diameter is heated by flow of an electric current. The surface of the rod is m...

A: Rod diameter, d=6 mm=0.006 mRod surface temperature, Ts=200oCConvective heat transfer coefficient, h...

Q: When several measured values agree with one another, the values are said to be accurate neithe...

A: Accuracy :- it refers to closeness of a measured value to standard value to a standard or known valu...

Q: 13. A cylinder with a bore diameter of 3 in and a rod diameter of 1.38 in is required to extend agai...

Concept explainers

Pressure Vessels

The term pressure vessel refers to a closed container that contains gas or liquid at a different pressure than environment pressure. The pressure vessels have a wide scale of applications in our day-to-day lives and other industrial places. Some common examples of pressure vessels are gas cylinders, autoclaves, compressor vessels, etc.

Question

BP3: A simply supported rectangular beam with length= 5', height =5", and depth = 1" is loaded with
distributed load of 100 Ib/in over its entire length. Determine normal and shear stresses at a point 1' from
right and 1" from the top.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A sign is supported by a pipe (see figure) having an outer diameter 110 mm and inner diameter 90 mm. The dimensions of the sign are 2.0 m X 1.0 m, and its lower edge is 3.0 m above the base. Note that the center of gravity of the sign is 1.05 m from the axis of the pipe. The wind pressure against the sign is 1.5 kPa. Determine the maximum in-plane shear stresses due to the wind pressure on the sign at points /I, B, and C, located on the outer surface at the base of the pipe.
A cantilever beam(Z, = 6 ft) with a rectangular cross section (/> = 3.5 in., h = 12 in.) supports an upward load P = 35 kips at its free end. (a) Find the state of stress ((7T, o^., and r in ksi) on a plane-stress element at L/2 that is i/ = 8 in. up from the bottom of the beam. Find the principal normal stresses and maximum shear stress. Show these stresses on sketches of properly oriented elements. (b) Repeat part (a) if an axial compressive centroidal load N = 40 kips is added at B
. A cantilever beam (width b = 3 in. and depth h = 6 in,) has a length L = 5 ft and is subjected to a point load P and a concentrated moment M = 20 kip-ft at end B. If normal stress trx= 0 at point C, located 0.5 in. below the top of the beam and 1 ft to the right of point Atfind point load P. Also show the complete state of plane stress on the element at point C.
A cylindrical tank subjected to internal pressure/? is simultaneously compressed by an axial force F = 72 kN (see figure). The cylinder has diameter d = 100 mm and wall thickness t = 4 mm. Calculate the maximum allowable internal pressure /?max based upon an allowable shear stress in the wall of the tank of 60 MPa.
P1 is the critical point. If the maximum permissible tensile stress is 150 MPa and themaximum permissible in-plane shear stress is 55 MPa, what is the largest load, P, that can beapplied by the rider? Where shaft OD = 32mm and thickness = 3.25mm
An electric power transmission pole is 12 m above ground level and embedded 2 m into the ground. The butt diameter is 450 mm and the tip diameter (the top of the pole) is 320 mm. The weight of the pole, cross arms, and wires is 33 kN. Assuming the pole transmits the load as a point load, find the change in vertical stress in kPa at 1m depth.
Find maximum shear stress
Problem :Pressure vessel made of alloy steel with Yield Strength of 250 MPa, Pressure acting on Pressure Vessel = 10 Atmosphere. Longitudinal Stress (σL) = 200 MPa. Hoop Stress (σθ) = 150 MPa. Radial Stress (σR) = -50. Question :a) How thick is the pressure vessel if the Inner Diameter is D = 2 Meters? b) Check whether the pressure vessel is safe or not? c) Calculate the maximum shear stress with Mohr's circle? d) Check whether the pressure vessel is safe or not with Tresca yield criterion and compare it with von Mises yield criterion?
A sign is supported by a pipe (see figure)having an outer diameter 110 mm and inner diameter90 mm. The dimensions of the sign are 2.0 m 3 1.0 m,and its lower edge is 3.0 m above the base. Note that thecenter of gravity of the sign is 1.05 m from the axis ofthe pipe. The wind pressure against the sign is 1.5 kPa.Determine the maximum in-plane shear stressesdue to the wind pressure on the sign at points A, B, andC, located on the outer surface at the base of the pipe.
Determine the maximum mean shear stress in a 30mm diameter spline. (see picture)
A simply supported wood beam is subjected to uniformly distributed load q. The width of the beam is 6 in, and the height is 8 in. Determine the normal stress and the shear stress at point C. Show these stresses on a sketch of a stress element at point C.
A simply supported I-beam (Figure 3) has a span of 3 m and is subjected to a load of 40 kN at mid-span. The flanges are 100 mm wide and 15 mm thick. The overall depth is 175 mm and the web is 20 mm thick. a. Determine the shear stresses along sections A-A, B-B, C-C and D-D.b. Plot the shear stress distribution diagram at any section due to the shear force only.