By using MMF method find the approximate voltage regulation of the machine provided that the rated terminal voltage is 350V and rated current is 5. Assume that the machine is working at a power factor of 0.8 lagging OC 450 400 350 300 250 SCC 150 7.5 100 5.0 2.5 25 50 75 100 125 150 Field excitation, A VOLTAGE REGULATION Open-circuit voltage.

By using MMF method find the approximate voltage regulation of the machine provided that the rated terminal voltage is 350V and rated current is 5. Assume that the machine is working at a power factor of 0.8 lagging OC 450 400 350 300 250 SCC 150 7.5 100 5.0 2.5 25 50 75 100 125 150 Field excitation, A VOLTAGE REGULATION Open-circuit voltage.

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

A separately excited motor runs at 1045rpm, with a constant field current, while taking an armature current of 50A at 120V. The armature resistance is 0.1 Ω if the load on the motor changes such that it now takes 95A at 120V, determine the motor speed at this load.
A 25kW 125V separately-excited de machine is operated at a constant speed of 3000 rpm with a constant field current such that the open-circuit armature voltage is 125 V. The armature resistance is 0.020. The speed of the separately-excited de machine is observed to be 2950 r/min with the field current at the same value. For a terminal voltage of 125V, Compute the armature current, terminal power, and electromagnetic power and torque.
The armature, series field and shunt field resistances of a 125kW, 250V long shunt cumulative compound dc generator are 0.025-ohm, 0.01 ohm and 30 ohms, respectively. If the stray power loss at rated load is 5kW, determine the motor brake horsepower required to drive this machine. Assume a brush drop of 2V and a stray load loss of 1% of the output.
A 50MVA, 11kV salient pole machine having a direct‐axis reactance of 0.8pu and a quadrature‐axis reactance of 0.6pu. The machine is connected to an infinite bus having a voltage of 11kV and supplying 40MW at 0.8 lagging power factor. Determine the power angle, the voltage proportional to field current, the direct axis and the quadrature‐axis components of the voltage and current. The load angle and the excitation voltage at which the maximum power transfer occurs.
A DC series motor is operated at full load from a 250V supply. The counter emf is found to be 220V at a line current of 40A. Find the armature resistance assuming the series field resistance is 0.3Ω
From the curves above find:the stall torque ?? in mN-m, the no-load speed ?max in rpm and the stall current ?? in A for 12V input.what's the corresponding motor model ?Find the equation of current ? (? ) and speed ? (?) in function of torque ?.
A 25kW, 250V DC shunt machine has an armature and field resistances of 0.060 and 1000respectively. Determine the total armature power developed when working () as generator delivering25kW output and (ii) as motor taking 25kW input
7. Increasing the length of the air gap of DC machine reduces the Armature reaction effect. Select one: True False
From the curve find: the stall torque Ts in N-m , the no-load speed ωmax in rpm, the stall current Is in A, the armature resistance R, the Torque constant kt,the Electrical constant kv. B- For a PMDC in general, where will be the speed ω* where the motor will be giving the maximum mechanical power? deduce it for the model used.
A series-connected dc motor is designed to operate with a variable load. The resistances RA and RF are negligible. To attain high efficiency, the motor has been designed to have very small rotational losses. For a load torque of 100 Nm, the machine runs at its maximum rated speed of 1200 rpm. a. Find the speed for a load torque of 300 Nm. b. What is the no-load speed? What are the potential consequences of having the load become disconnected from the motor without disconnecting the dc source?
3.Give the significance of Back emf in dc motor, What is the role of starter in motors? How the torque gets developed in the dc motor? Derive its relation.
(use 2-decimal digits for solution) A 10-hp (7.46 kW), 250-V. shunt motor takes a line current of 5 A. when runninglight. Calculate the efficiency when delivering full load output, if the armature andfield resistances are 0.5 Ω and 250 Ω respectively. At what output power will theefficiency be maximum?