Answer (c) and (d) only thankyou Based on the following scenario given that you're arecent civil engineering graduate,explain why you feel that you would learn the most bybeing:(a) in the jobsite trailer working for the superintendentas a field engineer(b) in the home office assisting staff schedulers andestimators(c) a project engineer assisting one project manager inall of his or her capacities in the trailer on the jobsite(d) a project or office engineer working out of thehome office but assisting several project managers onseveral projects with their RFIS, submittals, andmeeting notes

Project manager is very responsible person on the construction site. He plans, organise and divides…

(c) a project engineer assisting one project manager in all of his or her capacities in the trailer on the jobsite (d) a project or office engineer working out of the home office but assisting several project managers on several projects with their RFIS, submittals, and meeting notes

(c) a project engineer assisting one project manager in all of his or her capacities in the trailer on the jobsite (d) a project or office engineer working out of the home office but assisting several project managers on several projects with their RFIS, submittals, and meeting notes

Fundamentals Of Construction Estimating

4th Edition

ISBN:9781337399395

Author:Pratt, David J.

Publisher:Pratt, David J.

Chapter8: Pricing Generally

Section: Chapter Questions

Problem 10RQ

See similar textbooks

Related questions

Q: sing the section s-s and t-t shows, determine the force in embers HI, JI and IK or the powerline sup...

A: Given -

Q: An isolated L beam is having a span of 6 m and width of flange and web are 1000 mm and 300 mm respec...

Q: The truss shown consists of wooden members. Knowing that each member has a 50 x 50 mm square cross-s...

A: Determine the maximum value of the average normal stress in (a) in member BD, (b) in member DE.

Q: a. Determine the volume of each borrow pit soil required to meet the specification of the embankment...

A: Given data-

Q: Que 99. The length, width and height of a wall are given as 800 cm, 500 cm, and 50 cm respectively, ...

A: Given Length, L = 800 cm Width, w = 500 cm Height, h = 50 cm Rate of brickwork= 320 per m3 To Determ...

Q: 1. Draw the influence line for member FC. Use the tabulation method. 2. A uniform live load of 10kn/...

A: Using ILD Solution of a problem 1 and Problem 2

Q: prces of 50 kN and 80 kN, determine the st= The solid rod has a radius of 0.1 m. II

A: according to the figure (1) sum of the force in Z direction ∑fZ = 0 VZ-80 =0 ...

Q: a) For the fixed steel beam shown in Figure 1, use the double-integration method, i) determine the r...

Q: An ESP must treat 300,000 acfm with 99% efficiency. Estimate the cost of this ESP (f.o.b. Manufact...

A: Given- Q=300,000 acfm=5000 ft3/sn=99%=0.99

Q: The vertical and horizontal poles at the traffic light assembly are erected first. Draw the free bod...

A: Given,

Q: A beam of flexural rigidity EI is fixed at A and supported by a linear EI at B. Determine the compre...

Q: The tangent at the beginning of the curve at the P.C. is 125.70 m long and that at the P.T. is 155.6...

Q: Given following data, calculate a. Average specific gravity b. Average absorption value

Q: The soil profile at a site for a proposed office building consists of a layer of fine sand 10.4 m th...

Q: A small gap of 3 mm exists between the beam and the roller support before application of load as sho...

A: Given data, Gap between the beam and the roller support =3 mm UDl =10 kN/m

Q: Problem 1: Water flows through a 75 mm diameter pipe at a velocity of 3misec. Find (a) the volume fl...

A: Pipe diameter and velocity have been given and it has been asked to determine flow rate volume. Plea...

Q: Two polymer bars are connected to a rigid plate at B, as shown. Bar (1) has a cross-sectional area o...

A: Given, A1=1.5 in2E1=2400 ksiA2=0.832 in2E2=3110 ksiL1=16 inL2=38 inQ=8.2 kipsP=3.7 kipsR=15.6 kips

Q: *8-40. The 500-kg engine is suspended from the jib crane at the position shown. Determine the state ...

A: Assume acceleration due to gravity, g=10m/s2 At the hinge support there will be two reaction, result...

Q: An A36 tension member shown in the figure is connected with three 19 mm diamter bolts. Diameter of h...

Q: A continuous beam is carrying a triangular load as shown. An internal hinge at B allows the system t...

Q: 30. An equipment has a first cost of P500000, and the cost of installation is P30000. If the salvage...

Q: The rigid bar ABC shown is hinged at A and supported by a steel rod at B. 1m 25KN What is the shear ...

Q: An unspecified pure bending moment is used to bend an aluminium rod of radius 2.5 mm elastically int...

Q: The long bolt passes through the 30-mm-thick plate. If the force in the bolt shank is 9 kN, determin...

Q: Truss fill in the blank

A: Given data : The number of member in truss m=4 The number of Join in truss J=4 Support=2 Pinned supp...

Q: What is Rock Cycle? Explain and Provide a thorough discussion.

Q: An open cylindrical tank, 6 ft high and 3 ft in diameter, contains 4.50 ft of water. If the cylinder...

Q: Evapotranspiration in an 8 ha farm is 7 mm/day and percolation losses is 2 mm/day. What is the desig...

Q: PLS ANSWER ASAP A WET OF SOIL SAMPLE HAS A VOLUME OF 4.85 x 10^-4 m3 AND WEIGHS 8.5N. AFTER OVEN DR...

A: Wet and dry weight of sample along with its volume and specific gravity is given and it has been ask...

Q: Determine the force in the member CE of the truss shown. It has F1=13 and F2-3 loaded as shown. Answ...

Q: Using the method of sections, determine the force in members FC, BC, and 2. FE of the truss shown be...

A: Determine the force in members FC, BC, and FE of the truss shown below.

Q: In the figure shown, Given: VA=1.2 m/s = 30° Solve for: a) velocity of B (m/s) b) angular velocity o...

Q: onsano Acomposite assembly consisting of a steel [G- 80 GPa] core (2) connected by rigid plates at t...

Q: A WET OF SOIL SAMPLE HAS A VVOLUME OF 4.85 x 10^-4 m3 AND WEIGHS 8.5N. AFTER OVEN DRYING, THE WEIGHT...

Q: Two polymer bars are connected to a rigid plate at B, as shown. Bar (1) has a cross-sectional area o...

Q: An observer notes that an approach to a pretimed signal has a maximum of eight vehicles in a queue i...

A: We have to determine the value of time that will observer take to this queue to clear after the star...

Q: A cantilever beam shown below supports a uniform service (unfactored) dead load of 1 kip/ft plus its...

A: Given :

Q: The copper pipe [G = 8,000 ksi] has an outside diameter of 3.625 in. and a wall thickness of 0.250 i...

Q: nosite assembly consisting of a steel (G= 80 GPa] core (2) connected by rigid plates at the ends of ...

Q: total Average Day Demand in a Development is 52,000gals, Determine the required volume of water tank...

A: Given Average demand per day 52,000 gallons Additional requirements 20% Fire demand 350pgm for 30 ...

Q: 315 Find the resultant velocity induced at point P in Fig. 3.31 by the uniform stream, line source, ...

Q: A 25mm diameter pin at B connects the crank mechanism loaded as shown in the figure. 50OKN 200mm Wha...

Q: A 25mm diameter pin atB connects the crank mechanism loaded as shown in the figure. 500KN 200mm 100m...

A: Given : Diameter - 25mm Area = 3.14 x 25x25/4 =491 mm2 Load = 500 kN

Q: a. Calculate the flow rate out of the reservoir, if at the discharge (point C) the cros sectional ar...

A: Given -

Q: Problem 1 The cantilevered rectangular bar is subjected to a force of 9 kips. a. Determine the major...

Q: Q1: Draw shear force and bending moment diagrams by using section method. 20 kap 4 kip t Hinge Q2: D...

Q: What is the importance of studying engineering materials?

A: Medicine and health, information and communication, national security & space, transportation, s...

Q: perform by cross method draw the diagrams and get the bending moments 5T 2) 2 Ton/m E, I= CTES 3m Fa...

Q: The maximum speed of the train at the 3° curve on BG track will be (in kmph, round off two decimal p...

Q: o equal concentrated loads P. *Inserted Photo* (Use the deformation sign convention. When entering e...

Concept explainers

Methods to Determine Vertical Stress

The load applied to the soil is transferred to the underground. The presence of water at soil pores and solid grains above the soil are the primary components that are responsible for the effective load transfer. Due to the load acting, the internal component of the soil or the underground formations undergoes deformations or a tectonic shift. The amount of deformation depends upon the amount of load acting on the soil surface, which indeed, depends on the weight of everything present above the soil. Due to this, the underground soil element develops internal stresses which try to resist the tectonic changes.

Question

Answer (c) and (d) only thankyou

Based on the following scenario given that you're a
recent civil engineering graduate,
explain why you feel that you would learn the most by
being:
(a) in the jobsite trailer working for the superintendent
as a field engineer
(b) in the home office assisting staff schedulers and
estimators
(c) a project engineer assisting one project manager in
all of his or her capacities in the trailer on the jobsite
(d) a project or office engineer working out of the
home office but assisting several project managers on
several projects with their RFIS, submittals, and
meeting notes

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

Explain the process of suspension or termination of services between the client and a Civil Engineer
As a marine construction engineer, for shipbuilding and submarines, justify the possibility of using heavy engine and cabin crews in the lower half of the vessel?
What are the two instancesin a project when the engineer is not required to consider requests for substitutions of products?
4. How should a dispute between the Civil Engineer and the Client be settled?5. What are the typical services offered by Civil Engineers or civil engineering firms?6. How is a Civil Engineer selected for a particular service or project?7. What are the requirements for foreign civil engineers to practice their profession inthe Philippines?
You are a construction site engineer. Your task is to supervise the construction of a bridge in University of Technology and Applied Sciences connecting the Administration Building and English Language Center. Which of the following would be more appropriate for constructing the bridge? a. Men and machinery are moved to the site. b. Factors of production are stationary. c. Product moves from one work station to another work station. d. Men and machines are stationary.
In the near future when you already become a licensed civil engineer, which engineering services do you prefer to render to clients or which among those services are you interested to work in? Explain why you have chosen that/those services. Explain in atleast 10 sentences
Roy Creasey Enterprises, a machine shop, is planning to move to a new, larger location. The new building will be 60 feet long by 40 feet wide. Creasey envisions the building as having six distinct production areas, roughly equal in size. He feels strongly about safety and intends to have marked pathways throughout the building to facilitate the movement of people and materials. See the following building schematic. Room 1 Room 2 Room 3 Room 4 Room 5 Room 6 His foreman has completed a month-long study of the number of loads of material that have moved from one process to another in the current building. This information is contained in the flow matrix on the left below. Finally, Creasey also developed a matrix to indicate distances between the work areas shown in the building schematic, shown on the right below. From/To Material Welding Drills Lathes Grinders Benders Material 0 80 45 0 0 45 Welding 25 0 0 45 0 0 Drills 20 0 0…
If the specifications are silent on the subject, but a contractor asks you, as the Resident Project Representative or inspector, how to perform the work, which of the following is the recommended procedure? a. Be ready to help by telling the contractor your opinions,because as a member of the construction team,it is your responsibility. b. Politely decline because construction means andmethods are the sole prerogative of the contractor.c. Direct the contractor how to perform the workbecause you know that if the contractor asked you,it meant that he or she did not know how to execute the work, and the project may otherwise suffer delays or failures.
Mr. Daniel Sowah works for the High-way authority as an Engineer in their Weija, Ga-South District office in the Greater Accra Region of Ghana. He is a well-known registered professional engineer in his home region. Mr. Sowah’s primary job responsibility is the preparation of environmental impact reports for proposed construction projects initiated by municipalities in the Greater Accra Region. Mr. Sowah receives a call from High-way authority District office in Akyemansa in Eastern Region of Ghana that the engineer in that office responsible for preparing environmental impact reports has just resigned. The Akyemansa office has a contract to prepare an environmental impact report for a construction project that is planned by the regional education office and so his services is needed immediately by the office. Mr. Sowah travels to Akyemansa to gather the data needed to prepare the report. He then travels back to his office in Weija, Ga-South District office in the Greater Accra and…
Q2: Suppose a construction site is 35km away from the market area, Apply the knowledge of construction management which of the two theories I.e. “The just-in-time theory” or “The inventory buffer theory”, will you prefer for materials management and why? Civil Engineering Subject= Construction Management Answer in word format
Discuss the importance as a Civil Engineer, the Penal and Quasi-Judicial Proceedings for the said Profession.
Conclusion of effect of modernization to estimating < Estimating are the fundamental of building construction as it provides all parties on information such as the overall cost of the building, the material needed to construct a building, resources needed to fulfil trades of work and even information on contractual aspect of construction project. (Please include your findings on the matters discuss above – Technologies is good initiative to estimation, it is not good, etc…)