25 C1(a).(i).The density of oil in kg/m3 kC1(a). (ii) the weight density of oil in N/m3C1(a). (iii) the specific gravityC1(a). (iv) the specific volume in m³/kgC1 (b). 1.The capillary effect (water) in mmC1 (b). 2.The capillary effect (mercury) in mm (ii) the weight density of oil in N/m³, (iii) the specificgravity, and (iv) the specific volume in m3/kg.MC1 (b). Calculate the capillary effect in mm in aglass tube of 4.2 mm diameter, when immersed in(1) water (2) mercury. The values of surfacetension in contact with air are 0.0771 N/m and 0.64N/m respectively. The contact angle for water =0°and mercury =130°.

Solution C1(b): Given data: Diameter of the glass tube, d = 4.2 mm. The surface tension of water,…

C1 (b). Calculate the capillary effect in mm in a glass tube of 4.2 mm diameter, when immersed in (1) water (2) mercury. The values of surface tension in contact with air are 0.0771 N/m and 0.64 N/m respectively. The contact angle for water =0° and mercury =130°.

C1 (b). Calculate the capillary effect in mm in a glass tube of 4.2 mm diameter, when immersed in (1) water (2) mercury. The values of surface tension in contact with air are 0.0771 N/m and 0.64 N/m respectively. The contact angle for water =0° and mercury =130°.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A 0.10-mm-diameter glass tube is inserted into water at 100°C in a tub to observe capillary rise phenomenon. Determine the capillary rise of water in the tube. (a) What would happen if water is replaced with gasoline in tube? (b) Can you calculate the capillary rise if the diameter of tube at one end is 0.3mm and on the other end it is 0.10mm
Compute the capillary effect of immersion in water of a glass tube of 4mm internal diameter given the surface tension value is 0.073573 N/m, the density value is 990 kg/m^3 and the angle of contact is zero. Express your answer in SI units. Indicate the appropriate unit.
Calculate the magnitude of capillary effect in millimeters in a glass tube of 7 mm diameter when immersed in mercury. The temperature of the liquid is 25oC and the and the values of surface tension of mercury at 25oC is 0.51 N/m. The angle of contact for mercury is 130o
The capillary effect in a glass tube of 3.7 mm diameter, when immersed in (1) water and (2) mercury are 8.2 mm and -3.6 mm respectively. Calculate the value of surface tension in contact with air for water and mercury in N/m. Take, the contact angle for water =00 and mercury =1300.
Compute the capillary effect of immersion in mercury of a glass tube of 4mm internal diameter given the surface tension value is 0.51 N/m, the density value is 13600 kg/m^3 and the angle of contact is 130 degress. express your answer in appropriate SI unit.
QUESTION 3A square plate of 0.255 kg mass and 0.5 m side slides down a plane, inclined at anangle of 30° to the horizontal, at a uniform velocity of 0.2 m/s. If the thickness of thefluid film which separates the plate from the plane is 1 200 µm, determine the viscosityof the fluid.
Calculate the capillary rise in cm in a glass tube of 3.0 mm diameter when immersed vertically in mercury. Take the surface tensions for mercury as 0.0725 N/m in contact with air. The specific gravity of mercury is 13.6.
A balloon of spherical shape 6 m in diameter is filled with hydrogen gas at apressure of 1 bar absolute and 20oC. At a later time, the pressure of the gas is94% of its original pressure at the same temperature. What percentage of theoriginal mass must have escaped if the dimension of the balloon are notchanged?
A 0.10-mm-diameter glass tube is inserted into water at 100°C in a tub to observe capillary rise phenomenon. Determine the capillary rise of water in the tube. (a) What would happen if the water is cooled down to 20°C? (b) What would happen if 0.10mm tube replaced with 0.3mm tube?
The clutch system shown in Fig is used to transmit torque through a 2-mm-thick oil film with ? = 0.38 N⋅s/m2 between two identical 30-cm-diameter disks. When the driving shaft rotates at a speed of 1200 rpm, the driven shaft is observed to rotate at 1125 rpm. Using appropriate software, investigate the effect of oil film thickness on the torque transmitted. Let the film thickness vary from 0.1 mm to 10 mm. Plot your results, and state your conclusions.
How much time would be required to inject a 1.0-cm-long sample with twice the viscosity of water into a 40-cm-long capillary at 2.0x104 Pa?
A compressed air tank is designed to contain 50 standard cubic feet of air when filled to a gaugepressure of 200 atm at an ambient temperature of 70 F. Assume this is an air tank for scubadiving, and that the approximate shape of the tank is a cylinder with circular cross section. The interior volume of the tank is v=0.253 ft^3(a) If the interior length of the cylinder is 1 ft, what would be the inner diameter?(b) It is desired that the air tank be neutrally buoyant when empty. The density of aluminum is2700 kg/m3. If the tank is made of aluminum, what should be the wall thickness in order forit to be neutrally buoyant?