B-Calculate the Gross and Net calorific values of a coal having the following compositions, C = 63 %, H2 = 19 %, 02 = 03 %, S =13 % and ash=2. B-Calculate the Gross and Net calorific values of a coal havingthe following compositions, C 63 %, H2 = 19 %, 02 03 %,S= 13 % and ash=2.

Answered: Calculate the Gross and Net calorific…

Calculate the Gross and Net calorific values of a coal having the following compositions, C = 63 %, H2 = 19 %, 02 = 03 %, S =13 % and ash=2.

Solid Waste Engineering

3rd Edition

ISBN:9781305635203

Author:Worrell, William A.

Publisher:Worrell, William A.

Chapter7: Thermal Processes

Section: Chapter Questions

Problem 7.5P

See similar textbooks

Related questions

Q: Three cylinders are piled in a rectangular ditch as shown in the Figure 2 neglecting friction. Wa=…

Q: At a landfill site, leachate accumulated over a clay liner contains a chlorite concentration of…

Q: for a kaolin plant to dry 20 tph pressure filtered kaolin containing 22% H2O. Dry kaolin moisture…

A: the given coin two external layers are made out of a 75 wt % cu 25% NI compound with…

Q: A sample of refuse has a moisture content of 20%. A 1.2 g sample is placed in a calorimeter, and a…

A: a)Latent heat of evaporation of water is 2,260 kJ/kg.The mass of water content is 20% of…

Q: A vertical circular stack 100 ft. high converges uniformly from a diameter of 20 ft at the bottom to…

Q: A coagulation treatment plant with a flowrate of 0.05 m3/s doses with ferric sulfate at 20.0 mg/L.…

A: Given data, Flow rate = 0.05 m^3/s = 50 l/s = 432,0000 l/d Influent suspended solids = 36 mg/l…

Q: A 50 ml sample of industrial wastewater is taken into a silica crucible. The empty weight of the…

A: Given, quantity of sample taken = 50 ml =50x 10-3L empty weight of the crucible =54.352 g dry weight…

Q: 15.1Assuming that only CaSO3 is produced, calculate the daily production rate (in tons/day) of a…

Q: 4-23. Determine the lime and soda ash dose, in mg/L as CaCO3, to soften the following water to a…

Q: 47. What is called for the process of burning municipal solid waste in a properly designed furnace…

A: Municipal solid waste is to be treated effectively in order to maintain hygiene in society. There…

Q: An irrigation pump is to be powered by biomass using gasification technology the total biomss…

A: Solution- Given data,Total biomass = 24.56kg/minCarbon content of biomass = 40.87%Carbon content of…

Q: lorine concentration to inactive 2 logs of Cryptosporidium at a water temperature of 25oC, if the…

A: Vb =QKlnNoN , Vb = volume of compact chamber =2×2×1 =4m3 Q =…

Q: How much hydrochloric acid (kg/d) is required to neutralize a waste with 20 mg/L NaOH and a flowrate…

A: How much hydrochloric acide requiredto neutralize waste = 20 mg/L NaoH The flow rate = 220 L/min

Q: following data : ) Qty. of soft water required per hour = 25,000 litres (ii) Hardness present in raw…

Q: Еxample Treatment plant with capacity 50*10° 1/day. This treatment plant required 20 mg/l alum. If…

A: We have to find the value of quantity of alum and quantity of CaO used as coagulant yearly according…

Q: (d) Biomass and substrate mass balance equations can be merged giving QwXR = () Y/Qo` X VX (SS) - ka…

A: Given:- SRT=20days HRT=20H So=350mg/l S=100mg/l Y=0.15 Kd=0.22per day Calculate :- 1) prove Given…

Q: Problem-3: Consider a thermoelectric power plant of total capacity of 1300 MW with a load factor (or…

A: Total capacity= 1300 MW Annual capacity=78.5 Efficiency =n=42% Calculate the total power input…

Q: A black oil reservoir has been just discovered. The reservoir pressure is above the bubble point…

A: since reasevaior pressure is more than the bubble pressuretherefore the reservaior is undersaturated…

Q: 8. If saturated paste extract EC, is 2 dS/m, then what is the osmotic potential y, of the water if…

A: Data Given: ECe = 2 dsmθ = 15%θs = 45% Asked: Osmotic Potential Ψs of water

Q: If the five-day BOD of a waste is 220mg/L and the ultimate BOD is 320mg/L, what is the rate…

Q: Find the yearly alum quantity and the quantity of CaO which is used as coagulant aid

Q: 21.The waste water treatment plant has dissolved oxygen concentration of 2.8 mg/l and a discharge…

Q: A sample of refuse is analyzed and found to contain 10% water (measured asweight loss on…

A: Given: moisture content = 10%=0.1Heat value of mixture= 8000 KJ/kgWeight of sample placed in…

Q: AWWTP effluent of 0.011 m^3 /s and a BOD5 of 590 mg/L discharges into a river. The river has flow of…

Q: Using Rihet equation, estimate aeration tank Volume (V) based on the following conditions:…

A: GIVEN- Saturation constant (Ks) = 80 mg/L microbial decay coefficient (kd) =0.15/d maximum specific…

Q: The results of a jar test on a surface water supply sample revealed that the optimum dose of alum…

A: Data given: Optimum dose of alum (Al2(SO4)3.14H2O) as coagulant = 17 mg/l The water has total…

Q: 1. A groundwater contains the following constituents: CO2 = 9.6 mg/L Ca2+ = 95.2 mg/L Mg2+ = 25.8…

A: The given data is: Constituents of ground water CO2 = 9.6 mg/l Mg2+ = 25.8 mg/l Ca2+ = 95.2 mg/l…

Q: A 440-MW coal-fired power plant is burning coal that contains 185 ppb of mercury. The coal firing…

Q: Consider an activated sludge WWTP (wastewater treatment plant). Influent comes in at 28 million…

A: As per guidelines, we are supposed to answer only first 3 sub-parts. Kindly repost other parts in…

Q: The quantity of sludge produced from an aeration tank is 2,453 kg/day. The volume of the aeration…

A: The sludge loading is X=2453 kg/day. The volume of aeration tank is V=8500 m3. The inlet BOD is…

Q: Biomass and substrate mass balance equations can be merged giving QwXR/VX=Y/X (Qo/V) (So-S)-kd (i)…

A: We know that Hydraulic retention time and Solid retention time is as follows:

Q: A Semi-solid waste storage has a volume of 1145 m3. The basin is initially 71% empty. The semi-solid…

Q: A groundwater (Q1 = 5.0 L/s) reaches a point of convergence (mixing) in a river (Q = 1.0 m3/s) where…

Q: Q2) A new water storage tank with a volume of 950 m3 must be disinfected by filling with chlorinated…

Q: Q.107 An activated sludge system is operating under equilibrium conditions with following…

Q: If the work done 10000 cal, and the initial pressure 100 atm, when the ideal gas | expand…

A: Introduction : The general gas equation, commonly known as the ideal gas law, is the state equation…

Q: A 10 g sample of mixed MSW is combusted in a calorimeter having a heat capacity of 8850 cal/°C. The…

A: Mass of sample of mixed MSW, M=10 g Rise of temperature on combustion, ∆T=3.35°C Heat capacity of…

Q: Calculate the Gross and Net calorific values of a coal having the following compositions, C = 63 %,…

A: Given: C = 63% H2 = 19% O2 = 3% S = 13% Ash = 2

Q: 5 An air stripping tower is to be designed to lower the ethylbenzene (C,H0) concentration in a…

Q: 2.4 (b) (i) An electrostatic precipitator is to be constructed to remove fly-ash particles from…

Q: The partial pressure for CO2 at the earth’s surface is 10^−3.4 atm. 1) Determine the partial…

A: Given, Pco2 = 10-3.4 atm C = 10 ppt = 0.01

Q: 7. Calculate the amount of lime (84%) and soda (92%) required for treatment of 20,000 litres of…

A: Temporary hardness is cause by the bicarbonates of calcium and magnesium where as permanent hardness…

Q: Waste composition has been measured for two cities. The results are summarized in the given table.…

Q: Please give me both a and b solutions A settling tank with (L=6m, W=4 m , H= 4 m) treats a waste…

Q: Assume emissions of all sulfur compounds increase from 100 x 1012 grams/year up to 150 x 1012…

A: Assume emissions of all sulfur compounds increase from 100 x 1012 grams/year up to 150 x 1012…

Q: 1. A 770,000 gal conventional activated sludge pro- cess has a recycle ratio of 0.25, an influent…

A: Volume of sludge (V) = 770 X 103 galons Recycle ratio (Xt / X – Xt) = 0.25 Influent flow rate = 1MGD…

Q: Computation: Ratio Strength, PPM, mg% Show your complete solution. 1. If a city water supply has a…

A: Given data, Amount of nitrate ion present = 250 ppm

Concept explainers

Total Energy Consumption

The term energy consumption signifies the consumption of electricity. Energy consumption as electricity is a primary demand for households, factories, industries, complexes, and commercial places. According to a report, the total U.S. energy consumption for 2018 was 101 BTU (British Thermal Units). It accounted for 17% of the total energy consumption of the world. The total energy demand for the U.S. as oil equivalent was estimated to be about 6804 kg of oil equivalent.

Question

B-Calculate the Gross and Net calorific values of a coal having the following compositions, C = 63 %, H2 = 19 %, 02 = 03 %, S =13 % and ash=2.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

Step 2

Step 3

Step 4

Step by step

Solved in 4 steps with 4 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

Derive the CO2emission factor for the coal.
Find in cubic meters the volume of this horizontal oil furnace.
1) a)Calculate f and L of a rotary dryer for a kaolin plant to dry 20 tph pressure filtered kaolin containing 22% H2O. Dry kaolin moisture content must not be more than 5% H2O. b)Estimate the energy consumption as kWh and its cost (1 kWh = 14 ¢)
the value of oil is - 0.8 asap 15 mins
three viscosities of a lubricating oil were determined at three different temperatures, i.e., 1000[cs] at 0o c, 75[cs] at 40o c and 10[cs] at 100o c. using the vogel viscosity-temperature equation determine the oils viscosity at "-20o" c. what is the viscosity index of this oil? the lubricants density is 900 kg/m3
Determine the amount of coagulant required per day (kg/day).• Assume that the optimum dosage of alum at 25 mg/L was used and that the density of alum was 600kg/m3, Power = 1736.3 watt, Volume= 10.83 m^3 , water temperature is 20 oC, and velocity Gradient is 400 1/s.• Amount of alum = ? (kg/month)• Volume of alum = ? (m3/month)
How many dump trucks and excavators will you use to extract 100,000 cubic meters of coal in 1 month, under the following conditions. Truck cycle time = 15mins Truck capacity = 18 cubic meters Excavator loading time and waiting time= 3mins Bucket capacity 3 cubic meters 7hrs per day 26 days per month
Hydr. Cycle.
One way to estimate the energy content of wastes is based on an empirical equation described in Rhyner et al. (1995), which utilizes an elemental analysis (also called an ultimate analysis) of the material in question:HHV (kj/kg) = 339(C) + 1,440(H) – 139(O) + 105(S)where (C), (H), and (S) are the mass percentages of carbon, hydrogen, oxygen, and sulfur in dry material (for example, cardboard is 43.73 percent carbon, so C=43.73). For the following materials, find the higher heating values (HHV) of the dry waste and the HHV of “as received” waste accounting for the moisture content. Excel may be helpful. Now, assume a city’s waste is 10% corrugated boxes, 10% junk mail, 40% mixed garbage, 10% lawn grass, 10% demolition softwood, 10% tires, and 10% polystyrene. What is the average “as-received” HHV (kJ/kg) of this waste? Finally, how much waste needs to be burned per day to power a 4 MW power plant for the city? Assume the efficiency is 50% (that is, 50% of energy created goes to…
What is the energy content of sub-bituminous coal?
Example Treatment plant with capacity 50*106 l/day. This treatment plant required 20 mg/l alum. If the water alkalinity as CaCO3 is 6 mg/l. Find the yearly alum quantity and the quantity of CaO which is used as coagulant aid? Atomic weights: Al=27, O=16, H=1, C=12, Ca=40
You are treating 10 million gallons per day (MGD) of water with alum at a dosage of 50.0 mg/L. Alum is available as a hydrated salt Al2(SO4)3.16H2O. Determine:(a) The monthly alum dosage required in metric tons/month (1 metric ton = 1000 kg)(b) If you assume that each equivalent of alum added to the water consumes 1 equivalent of alkalinity, determine the alkalinity consumed by alum addition in milliequivalents/L (meq/L)(c) Given that the raw water contained 30 mg/L as CaCO3 of alkalinity, is the alkalinity sufficient? What would happen if the alkalinity is inadequate?