ANSWER ALL~~~~~~~ 3 DECIMALCalculate the normal stress in the brass rod in MPa.Calculate the normal stress in the bronze rod in MPa.Calculate the elongation of the brass rod in mm.Calculate the vertical displacement at midspan of the plank in mm. A load Q=200kN is applied to a rigid plank MN as shown. At ends M and N, vertical brass and bronze rods are attachedrespectively to support the plank. Neglect the weight of the plank.BrassL = 5mBronzeL = 6mA = 400 mm²A = 500 mm²E = 100 GPaE = 120 GPa3mQM5mN

Answered: Image /qna-images/answer/14b4c5f7-45d3-4170-a86a-fe4e4c2b389a.jpg

Calculate the normal stress in the brass rod in MPa. Calculate the normal stress in the bronze rod in MPa. Calculate the elongation of the brass rod in mm. Calculate the vertical displacement at midspan of the plank in mm.

Calculate the normal stress in the brass rod in MPa. Calculate the normal stress in the bronze rod in MPa. Calculate the elongation of the brass rod in mm. Calculate the vertical displacement at midspan of the plank in mm.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Consider the truss shown in the figure. Determine the force in members ML, MC, and BC and state if these members are in tension or compression. Show all your work. (lengths AB-BC=CD%3DE%3DEF%3FG=3m) 50 kN 50 kN 50 kN N ML K J IH B CD E F hod 18 m 6 @3 m
Assume that the truss is simply supported at joints M and E. Determine the stress at member DE if Pu = 18.375 Kips, the area is 23 in?. Answer your problem with the given unit ksi. Pu Pu Pu Pu Pu Pu Pu * (a: 10' - J I H G K F * (a ' - RI Rv 8@10'=80
ASSUME THAT THE TRUSS IS SIMPLY SUPPORTED AT JOINTS M AND E. Determine the stress at member CD if Pu = 18.375 Kips, the area is 23 in?. Answer your problem with the given unit ksi. Pu Pu Pu Pu Pu Pu Pu * (a. 10' - R it J I H G F H (n 10' - KI K Ru 8@10'=80'
2.47 The negligible weight rigid bar is pinned at O and attached to two vertical rods. WI is the largest load P that can be applied without exceeding stresses of 150 MPa in t steel rod and 70 MPa in the bronze rod, assuming the rods were initially stress-free? 4m 3m 3m Steel A = 600mm2 E = 83Gpa L = 4m Steel V P A = 1800mm2 E = 200Gpa L 3m
The truss is made of three A-36 steel members, each having a cross-sectional area of 400 mm². Part A P = μÃ Value 0.8 m Determine the magnitude P required to displace the roller to the right 0.24 mm. Express your answer to three significant figures and include appropriate units. Submit Request Answer 0.8 m Units 5 KN ? 0.6 m
A wooden beam is fabricated by nailing together three boards as shown. The boards have dimensions of b1 = 14 in., d1 = 2.2 in., b2 = 2.2 in., d2 = 13 in., b3 = 7 in., and d3 = 2.2 in. %3D (a) Determine the distance from the bottom edge of the section to the centroid. (b) Determine the moment of inertia of the section about the z axis. (c) Determine the maximum shear stress in the cross section if the internal shear force is V = 480 lb. Assume that the shear force Vacts in the y direction. (d) Consider nail B that connects the bottom flange to the beam web. If the nails used at B can provide 150 Ib of horizontal resistance (in the x direction), determine the maximum nail spacing s (in the x direction) that can be used for nail B. Assume V = 480 lb. (e) If a bending moment applied about the z axis produces a tension normal stress of ox = 510 psi at the bottom of the cross section, determine the compression normal stress produced at the top of the cross section. b1 y| Nail A di d2 b2 dz…
Two aluminum (Ea=77 GPa) rods AB and CD, and a steel (Es=202 GPa) rod EF support a 82.7 kN load P. Each of the rods has a 400 mm2 cross- sectional area. Neglecting the deformation of rod BED, determine the change in length (in mm correctly up to two decimal places) of rod AB. A C P 500 mm В E 400 mm F
Set P = 3 kN. (Figure 1) Figure 60° 4 m 4 m 4 m 60° D Part D Determine the force in member BE of the truss. Express your answer to three significant figures and include t the case of tension. FBE = Part E Submit Request Answer FCD= Value Part F Determine the force in member CD of the truss. Express your answer to three significant figures and include t the case of tension. Value FCE= S Submit Request Answer Å Value Units Submit Request Answer Units Determine the force in member CE of the truss. Express your answer to three significant figures and include t the case of tension. ? Units ? ? Figure Part G FDE = 60 Submit FAB Value Value Submit Bequest Answer ▾ Part B FAE Determine the force in member AB of the truss Express your answer to three significant figures and include appropriate units. Enter negative value in the case of compression and positive value in the case of tension. Submit ▾ Part C Submit Value Fac Value ▾ Part D Request Answer Determine the force in member BC of the…
Assume that the truss is simply supported at joints M and E. Determine the stress at member FE if Pu = 18.375 Kips, the area is 11 in?. Answer your problem with the given unit ksi. Pu Pu Pu Pu Pu Pu Pu * (a 10' - L K J I H G F * (i 10' - R Rv 8@10'=80'
The beam is loaded by two point forces P. The beam is assembled according to the cross-sectional view by nailing wooden parts with cross-sections of 50 mm x c = 220 mm and 25 mm x d = 260 mm. How large can the value of the load P be when the distance between the nails in the longitudinal direction of the beam is 100 mm, the cross-sectional area of the nail is 9 mm2 and their permissible shear stress is 110MPa? Then calculate the maximum stresses and shear stresses of the beam at that load when the distance between the articulated supports is L = 1.9 m and the length of the beam projections a = 1.3 m. Permissible shear force of one nail? kN Static torque of the cutting surface? mm^3 Maximum torque change in cantilever? kNm Cutting force of the projection? kN Magnitude of force P? kN Calculated with the obtained force P maximum normal stress? MPa shear stress maximum? MPa
tension. Consider the truss shown in (Figure 1). Set P = 7 kN , P2 = 9 kN, P, = 13 kN ? μΑ FBE = Value Units Submit Request Answer igure < 1 of 1 Part C E P3 Determine the force in member EF of the truss and state if this member is in tension or compression. Express your answer to three signif ant figures and include the appropriate units. Enter negative value in the case of compression and positive value in the case of tension. 3 m D 3 m 3 m 3 m ? μΑ P2 FEF = Value Units
Sispose that P = 30 kip, P=20 kip, and = 10 kip Figure ++. 400 San 184-399 30 Part A Determine the force in member GF of the bridge truss Express your answer in kilopounds to three significant figures. Enter negative value in the case of compression and positive value in the case of tension For Submit Part B Avec Fre Request Anst O? Determine the force in member PC of the bridge truss Express your answer in kilopounds to three significant figures. Enter negative value in the case of compression and positive value in the case of tension VAZO IT vec kip ? kip