capacitor consists of two closely spaced metal conductors of large area, separated py a thin insulating folI. It has an electrical capacity or 3600.0 µF and is charged to a potential difference of 87.0 V. Calculate the amount of énergy stored in the capacitor. Submit Answer Tries 0/5 Calculate the charge on this capacitor when the electrical energy stored in the capacitor is 6.48 J. Submit Answer Tries 0/5 If the two plates of the capacitor have their separation increased by a factor of 5 while the charge on the plates remains constant, by what factor s the energy stored in the capacitor increased?

capacitor consists of two closely spaced metal conductors of large area, separated py a thin insulating folI. It has an electrical capacity or 3600.0 µF and is charged to a potential difference of 87.0 V. Calculate the amount of énergy stored in the capacitor. Submit Answer Tries 0/5 Calculate the charge on this capacitor when the electrical energy stored in the capacitor is 6.48 J. Submit Answer Tries 0/5 If the two plates of the capacitor have their separation increased by a factor of 5 while the charge on the plates remains constant, by what factor s the energy stored in the capacitor increased?

University Physics Volume 2

18th Edition

ISBN:9781938168161

Author:OpenStax

Publisher:OpenStax

Chapter8: Capacitance

Section: Chapter Questions

Problem 72AP: Three capacitors having capacitances 8.4, 8.4, and 4.2 F are connected in series across a 36.0-V...

See similar textbooks

Similar questions

In Figure P27.7, capacitor 1 (C1 = 20.0 F) initially has a potential difference of 50.0 V and capacitor 2 (C2 = 5.00 F) has none. The switches are then closed simultaneously. a. Find the final charge on each capacitor after a long time has passed. b. Calculate the percentage of the initial stored energy that was lost when the switches were closed. FIGURE P27.7
A parallel-plate capacitor is connected to a battery. What happens to the stored energy if the plate separation is doubled while the capacitor remains connected to the battery? (a) It remains the same. (b) It is doubled. (c) It decreases by a factor of 2. (d) It decreases by a factor of 4. (e) It increases by a factor of 4.
What If? The two capacitors of Problem 13 (C1 = 5.00 F and C2 = 12.0 F) are now connected in series and to a 9.00-Y battery. Find (a) the equivalent capacitance of the combination. (b) the potential difference across each capacitor, and (c) the charge on each capacitor.
A parallel-plate capacitor is charged and then is disconnected from the battery. By what factor does the stored energy change when the plate separation is then doubled? (a) It becomes four times larger. (b) It becomes two times larger. (c) It stays the same. (d) It becomes one-half as large. (e) It becomes one-fourth as large.
Three capacitors are connected to a battery as shown in Figure P20.50. Their capacitances are C1 = 3C, C2 = C, and C3 = 5C. (a) What is the equivalent capacitance of this set of capacitors? (b) State the ranking of the capacitors according to the charge they store from largest to smallest. (c) Rank the capacitors according to the potential differences across them from largest to smallest. (d) What If? Assume C3 is increased. Explain what happens to the charge stored by each capacitor. Figure P20.50
When a Leyden jar is charged by a hand generator (Fig. 27.1, page 828), the work done by the person turning the crank is stored as electric potential energy in the jar. When a capacitor is charged by a battery, where does the electric potential energy come from?
A parallel-plate capacitor is connected to a battery. What happens to the stored energy if the plate separation is doubled while the capacitor remains connected to the battery? (a) It remains the same, (b) It is doubled. (c) It decreases by a factor of 2. (d) It decreases by a factor of 4. (e) It increases by a factor of 4.
Three capacitors having capacitances 8.4, 8.4, and 4.2 F are connected in series across a 36.0-V potential difference, (a) What is the total energy stored in all three capacitors? (b) The capacitors are disconnected from the potential difference without allowing them to discharge. They are then reconnected in parallel with each other with the positively charged plates connected together. What is the total energy now stored in the capacitors?
Find the equivalent capacitance between points a and b in the combination of capacitors shown in Figure P25.13. Figure P25.13
a. If capacitor B in Figure 27.8 has a charge of 0.5 nC, what is the potential difference between its plates and how much potential energy does it store? b. If capacitor A in Figure 27.8 stores the same amount of potential energy found in part (a), what is the magnitude of the excess charge on its plates? What is the potential difference between its plates? Use the capacitance CA found in Concept Exercise 27.2.
A capacitor is constructed from two square, metallic plates of sides and separation d. Charges +Q and Q are placed on the plates, and the power supply is then removed. A material of dielectric constant K is inserted a distance x into the capacitor as shown in Figure P20.85. Assume d is much smaller than x. (a) Find the equivalent capacitance of the device. (b) Calculate the energy stored in the capacitor. (c) Find the direction and magnitude of the force exerted by the plates on the dielectric. (d) Obtain a numerical value for the force when x = /2, assuming = 5.00 cm, d = 2.00 mm, the dielectric is glass ( = 4.50), and the capacitor was charged to 2.00 103 V before the dielectric was inserted. Suggestion: The system can be considered as two capacitors connected in parallel. Figure P20.85