Case 01: Suppose, A company is requested you to build up an air conditioner with the helpof below motor. The main winding of this specific motor is Zm-(4.5+j3.7) ohm. The resistanceof the Auxiliary winding is 10 Q. There has some available value of the capacitors, which are100 uF, 200 uF, 300 µF, 400 uF and 500 uF.(100µF, 200µF, 300µF,400 µF, 500µF)(Sohm, 10 ohm, 15 ohm)4.5Supply220Vj3.78Sj3.7a. Mention the name of the motor.b. Draw a Capacitance vs Torque characteristic curve considering the available capacitors.c. Which capacitance will be optimum for achieving maximum torque and efficiency?Data for Graph10 ΩPhase angle (a)Capacitance100 uF200 uF300 uF400 uF500 uFTorque

Given circuit is shown below. a. Name of the motor shown in above circuit is permanent split…

Case 01: Suppose, A company is requested you to build up an air conditioner with the help of below motor. The main winding of this specific motor is Zm-(4.5+j3.7) ohm. The resistance of the Auxiliary winding is 10 Q. There has some available value of the capacitors, which are 100 µF, 200 µF, 300 µF, 400 µF and 500 µF. (100µF, 200µF, 300uF, T 400 µF, 500uF) 4.5

Case 01: Suppose, A company is requested you to build up an air conditioner with the help of below motor. The main winding of this specific motor is Zm-(4.5+j3.7) ohm. The resistance of the Auxiliary winding is 10 Q. There has some available value of the capacitors, which are 100 µF, 200 µF, 300 µF, 400 µF and 500 µF. (100µF, 200µF, 300uF, T 400 µF, 500uF) 4.5

Delmar's Standard Textbook Of Electricity

7th Edition

ISBN:9781337900348

Author:Stephen L. Herman

Publisher:Stephen L. Herman

Chapter29: Dc Generators

Section: Chapter Questions

Problem 1PA: You are working as an electrician in a large steel manufacturing plant, and you are in the process...

See similar textbooks

Similar questions

For residential water heaters, the Consumer Product Safety Commission suggests a maximum temperature setting of ___________ F (_____________ C). Some states have laws stating a maximum temperature setting of ____________ F (________________ C).
Q 03: Briefly discuss, how the energy consumptions for operations of a fork lifter could be justified. Suppose that a fork lifter has a total energy consumption of 150 W.Hr. The total trips of the vehicle are 375. How the battery duty cycle may be calculated in this case?
Write the differential equation for t > 0 for iC in the given figure. Assume VS = 9 V, RS = 4 kohm, R1 = 11 kohm, and R2 = R3 = 20 kohm.
A family in Charlotte wants to drive to a campsite next to Mt. Mitchell. Their trip will take them 2km up in elevation. They have the choice of taking their top-of-the-line Tesla model S P100D, which when fully charged has 100 kWh of stored energy in the batteries (and for this problem is 100% efficient at converting its stored energy into kinetic energy) and a mass of 2200kg, or their choice of taking their 2021 Ford F-150. Gasoline has an energy density of 34.2 Megajoules per liter. The family owns the smallest 2021 Ford F-150, and so it has a fuel tank of 23 gallons. Assume the F-150’s engine is able to convert 30% of the energy stored in its gasoline tank into kinetic energy (typical efficiency for gasoline engines), with the rest of the stored energy in the gasoline lost to heat. The mass of this model F-150 is about 2000kg. They are going to tow their big pop-up trailer to the campsite.For this question, assume that each vehicle must use a combined 79 kWh of energy to combat the…
Estimate the AEP for a 3-MW wind turbine in a wind regime that has a CF= 30%. For this turbine explain why the increase of wind speed to levels greater than 25 m/s generates less electrical power compared to wind speeds around 11 m/s
a)Why is the fluorescent circuit economical, and how do we calculate the power of the lamp and how efficient the fluorescent lamp is compared to the incandescent lamp, for example? b)Do you think that the length of the fluorescent tube affects the ignition process? c)In large halls and factories there are hundreds of fluorescent lights, so are those numbers a power problem? And what is its treatment? d)Can the throttle coil be replaced with a Capacity or resistance? Explain why. e)Do the economical lamps that have become popular recently work on the same principle as the fluorescent work? And which one is better? And why?
a) If Vac= 20V, Vab=? b) If Vac= 20V , Vad=? C) If Vac= 20V, Vd=? d) load of third capacitor=? E) load of 2uF capacitor=? F) energy stored in the 2uFcapacitor=? G) C=?
Explain, with the aid of a circuit diagram, how ad.c. voltmeter may be calibrated by means of a potentiometer method.A moving-coil instrument, used as a voltmeter, hasa coil of 150 turns with a width of 3 cm and an activelength of 3 cm. The gap flux density is 0.15 T. If thefull-scale reading is 150 V and the total resistance ofthe instrument is 100 000 Ω, find the torque exertedby the control springs at full scale.
A battery of emf 30.0 V is connected to a switch, an inductor of inductance ? = 0.600 ? and two resistors, R1 = 10.0 ? and R2 = 6.00?. The switch is initially open. A. What are the values of currents ?1, ?2, ?3 just after the switch is closed? (Just give an answer) ?1 = ?2 = ?3 = B.)Which point, a or b, is at higher potential or are they at the same potential, just after switch S is closed? (Just give an answer) C. What is the value of current ?1 through the battery a long time after the switch is closed? Show your work and briefly explain your logic
A coil of inductance 5 H and a resistance of 16 Ω is connected to a 120 V DC supply. Determine (a) the steady state value of current flowing in the coil, (b) the time constant of the circuit,(c) the value of the induced e.m.f. after 0.2 s, (d) the time for the current to rise to 85% of its final value, and (e) the value of the current after 0.5 s.
A circuit powered by a 20V DC supply has a 50kΩ resistor and 20 μ Capacitor connected in series. For this circuit determine the:a. Initial value of the current flowing? b. The time constant of the circuit? c. The value of current after 1 second of connection? d. The value of capacitor voltage 2 seconds after the connection?
Q-1: Give brief answer to the following: (Answer Ten only)1) what is the potential transformer used for in power substation?2) what is process leads to lowering the number of free electrons?3) what is The Townsend’s Criterion4) why Sulphur Hexafluorid has good insulation strength?5) What is Intrinsic Breakdown6) why do bubbles lead to breakdown of liquid?7) how to decease the ripple voltage of cockroft-walton voltage multiplier circuit8) how much the maximum charging current of A Van de Graaff generator has a beltwidth 1 m, a belt speed of 4 m/s, and charge density of 10 c/m29) Why does need for Reactive Power Compensation in test transformer?10) The output voltage of series resonant circuit is given by the formula _________11) what is impulse voltage and what is its standard wave shape?12) Which advice can measure impulse voltage?