5.3 The following data have been obtained from a laboratory settling test on a slurry of mineral solids (S.G.= 4.0) in water. The test slurry concentration was 200 g solids/L water. Time (min) Height (mm) 10 20 30 40 50 60 80 100 120 160 200 498 395 291 204 178 169 160 154 151 148 142 140 a. Construct a curve showing the relationship between solids flux and solids concentration. b. A continuous thickener is required to process 300 tonnes/h of the mineral slurry containing 250 g solids/L water. The underflow velocity is to be fixed at 0.12 m/h. Determine the minimum cross sectional area required for the thickener, and the maximum concentration of the underflow in (g solids/L water). c. If the operating underflow concentration is 550 g solids/L water, what is the actual diameter of the thickener? Would this diameter be acceptable? d. Estimate the thickener depth required for the thickener in case (c). Approx. ans. (b) 810 m2; 728 g solids/L (c) 36.5 m; yes (d) 1.0 – 2.2 m

5.3 The following data have been obtained from a laboratory settling test on a slurry of mineral solids (S.G.= 4.0) in water. The test slurry concentration was 200 g solids/L water. Time (min) Height (mm) 10 20 30 40 50 60 80 100 120 160 200 498 395 291 204 178 169 160 154 151 148 142 140 a. Construct a curve showing the relationship between solids flux and solids concentration. b. A continuous thickener is required to process 300 tonnes/h of the mineral slurry containing 250 g solids/L water. The underflow velocity is to be fixed at 0.12 m/h. Determine the minimum cross sectional area required for the thickener, and the maximum concentration of the underflow in (g solids/L water). c. If the operating underflow concentration is 550 g solids/L water, what is the actual diameter of the thickener? Would this diameter be acceptable? d. Estimate the thickener depth required for the thickener in case (c). Approx. ans. (b) 810 m2; 728 g solids/L (c) 36.5 m; yes (d) 1.0 – 2.2 m

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

6. 1kg of soil sample, placed after a period of time, the moisture content from 25% to 20%, the water in the soil decreased ( ).A. 0.06kg B. 0.05kgC. 0.04kg D. 0.03kg 8. When calculating the time factor Tv, if the soil is drained on one side, H in the equation is taken as the thickness of the soil layer ( ).A. half B. double C. 2 times D. 4 times
Suppose the following values are obtained through a Constant Head Apparatus while measuring permeability. Calculate the coefficient of permeability. · Volume of water passing through soil in time (t) = 100ml · Cross-sectional area of specimen = 500 mm2 · Thickness of specimen = 8 mm · Hydraulic head = 5 mm · Mean temperature of water during test = 20oc Time interval t = 2 minute
The given values are as follows: The specimen's e=0.46 length of soil specimen=450mm constant head difference=700mm Water collected in 3 minutes =3.54x10-4 m3 Area=2.26x10-3 m2 1) Find the coefficient of permeability (Ans. 2.012 m/hr) 2) Find the discharge velocity (Ans. 0.052 m/min) 3) Find the interstitial velocity (Ans. 0.165 m/min)
A settling column analysis is performed on a dilute suspension of particles from water. The suspension exhibited discrete particle settling characteristics. Data collected from samples taken at a depth of 1.5 meters are as follows: Time required to settle 1.5 m (min) 0.6 1.2 2.2 4.5 6 8.8 Fraction of Particles Settled 0.3 0.45 0.6 0.7 0.85 0.96 Plot the velocity distribution for the suspension Find the overflow rate (Q/A) for a settling tank that will give at least 75% removal. If the flowrate into the settling tank in part b. is 850 m3/hr, please give the dimensions of you settling tank? Since you will need to address the smaller particles that have passed through this system at some later point, what is the particle size distribution (mass fraction vs. diameter) if we assume the particle density is that of sand (sg = 2.65)
A liquid limit test on a clay was performed with the following results. The natural water content of the clay is 38% and plastic limit is 21%. Number of Blows 6 12 20 28 32 Water content (%) 52.5 47.1 42.3 38.6 37.5 What is the plasticity index of this clay? (Use Interpolation) Group of answer choices 15.74% 18.99% 18.85% 17.63% Please answer this asap for upvote. thanks
Given below is the result of a sieve analysis done on a soil sample.Sieve No. Diameter Percent Passing %4 4.750 9510 2.000 8220 0.850 7340 0.425 5360 0.250 23100 0.150 14200 0.075 7Pan --- 0Determine the value of the coefficient of uniformity
The SQUARE base permeameter (seen from above), has three soil layers arranged vertically as shown in the image. L is: 70cm, the difference of head h is: 105 cm. The coefficient of permeability of soil 1 K1 is 0.065 cm/sec, soil 2 K2 is 0.0030 cm/sec and soil 3 K3 is the 0.0095 Calculate the amount of water collected in a time of 10 minutes.
The soil sample presented in Figure below is under constant head permeability test. The soil is consist of a silty sand (SM) with k = 5×10-3cm/s and specific gravity of 2.70. The soil is fully saturated and its moisture content is determined to be 18.5%. Determine the time required for the plug of colored water to pass through the soil (i.e., from when the leading edge first enters the soil to when it begins to exit). Use seepage velocity for your calculation.
9 The following results are obtained from a series of cone penetrometer tests. Mass of empty can, g 18.4 19.3 Mass of empty can + wet soil sample, g 51.6 45.6 Mass of empty can + dry soil sample, g 37.8 35.8 Cone penetration, mm 26 15 Determine the liquid limit in percent. Round off to two decimal places.
In a liquid limit test, using cone penetrometer, the following readings are recorded. Plastic Limit test Weight of wet soil+container= 22.12g Weight of dry soil+container=21.42g Weight of container = 13.07g Natural water content test Weight of wet soil+container= 17.53g Weight of dry soil+container=14.84g Weight of container = 7.84g A.Compute the liquid limit B.Compute the plastic limit C.Compute the natural water content D.Compute the plasticity index E.Compute the liquidity index F.Compute the consistency index 7. Define the consistency of the soil based on the liquidity index
Calculate the arithmetic average and thickness-weighted average oil saturation. SAMPLE THICKNESS , h Oil Saturation, % 1 2 75 2 3.5 74 3 1 73 4 4 76 5 2 75 6 2 72
From the laboratory result of a sample taken from the field, the total volume of wet sample is 1x 10ˉ³ m³ and weight of wet sample is 2 kg. Water content is 12%. Gs = 2.80. emax = 0.68 and emin = 0.42 1. Which of the following gives the dry unit weight? a. 19.62 kN/m³ b. 21.26 kN/m³ c. 17.52 kN/m³ d. 23.54 kN/m³ 2. Find the void ratio. a. 0.167 b. 0.423 c. 0.292 d. 0.567 3. Find the relative density. a. 54.23% b. 43.46% c. 50.16% d. 49.15%