Coefficient Permeability of Soil A falling head permeability test is conducted on silty soil. The sample diameter is 10.0 cm and its length or thickness is 7.8 cm. The diameter of the standpipe is 6.0 mm. The head at the start of the test is 47.8 cm. The test lasts 8.5 min and the head falls to 22.6 cm. Find the coefficient of permeability of this soil in cm/s? Provide step by step solution.

Coefficient Permeability of Soil A falling head permeability test is conducted on silty soil. The sample diameter is 10.0 cm and its length or thickness is 7.8 cm. The diameter of the standpipe is 6.0 mm. The head at the start of the test is 47.8 cm. The test lasts 8.5 min and the head falls to 22.6 cm. Find the coefficient of permeability of this soil in cm/s? Provide step by step solution.

Fundamentals of Geotechnical Engineering (MindTap Course List)

5th Edition

ISBN:9781305635180

Author:Braja M. Das, Nagaratnam Sivakugan

Publisher:Braja M. Das, Nagaratnam Sivakugan

Chapter6: Hydraulic Conductivity

Section: Chapter Questions

Problem 6.7P

See similar textbooks

Similar questions

In a constant head test, the sample of sand was collected 150 cm3 of water in just two minutes. The diameter is 5.08 centimeters, the length was 10 centimeters, and the head was maintained at 20 cm. 1) Determine the coefficient of permeability (Ans. 3.08 x 10-2 cm/s) 2) Determine the kind of soil (Ans. Coarse Sand) 3) Determine the interstitial velocity if n=0.3 (Ans. 0.21 cm/s)
please solve B only. subject: geotechnical Engineering A sample coarse grained soil is 50mm. In diameter and 150mm long was tested in a constant-head apparatus. The soil sample was prepared at a void ratio of 1.5. The total head was kept constant at 300mm and the amount of water is collected in 4 sec. was 50cm^3. The test temperature was 22°Ca.) Compute the temperature correction factor.b.) Compute the corrected coefficient of permeability in cm/sec. c.) Compute the interstitial velocity.
Problem # 1. A constant head permeability test is performed on a sample of granular soil. The length of the soil sample is 15 cm and the cross-sectional area is 10 cm^2. If a 24 cm^3 volume of water passes through the oil sample in a 3-minute period and the constant head is 30 cm determine the followinga. Determine the coefficient of permeability of the soil.b. Find the discharge velocity.c. Compute the seepage velocity if the void ratio is 0.64.
A sample coarse grained soil is 60mm. In diameter and 150mm long was tested in a constant-head apparatus. The saturated soil sample was prepared at a moisture content 40%, specific gravity =2.61. The total head was kept constant at 250mm and the amount of water is collected in 4 sec. was 50cm^3. The test temperature was 30°C a.) Compute the temperature correction factor. _________ b.) Compute the corrected coefficient of permeability in cm/sec _________ c.) Compute the interstitial velocity in cm/s _________
A block of soil in a permeability test has a length of 120 mm and a cross-sectional area of 600 mm2. The water level at one end is 200 mm above a fixed datum and at the other end is 30 mm above the same plane. The flow rate was 2 ml in 90 seconds. Compute the coefficient of permeability of the soil in m/s. a.2.61 x 10-5 m/s b.0.98 x 10-5 m/s c.1.78 x 10-5 m/s d.3.97 x 10-5 m/s e.1.89 x 10-5 m/s
For a falling head laboratory test, the following are the given values:• Length of soil specimen = 210.00 mm• Initial head = 523.00 mm• Final head = 297.00 mm• Duration of test = 3.50 mins• Area of standpipe = 42.0 sq.mm• Area of specimen = 1050.00 sq.mmA. Compute for the hydraulic conductivity of the soil in cm/sec.B. Determine the seepage velocity if n=0.35C. Determine the head difference at t = 120 sec
A sample coarse grained soil is 50mm. In diameter and 150mm long was tested in a constant-head apparatus. The soil sample was prepared at a void ratio of 1.5. The total head was kept constant at 300mm and the amount of water is collected in 4 sec. was 50cm^3. The test temperature was 22°Ca.) Compute the temperature correction factor.b.) Compute the corrected coefficient of permeability in cm/sec. c.) Compute the interstitial velocity.
A constant head permeability test is performed on soil that is 4 cm2, and 2.5cm long. The head difference applied during the test is 20 cm and 7 cm3 is collected over a time of 100 sec. Then, falling head test is conducted on the same soil specimen at the same time (t1 – t2 = 100 sec), and the standpipe diameter is 0.8 cm. If the average head during the test should be 18 cm, what are h1 and h2 values, provide step by step solution solving h1 and h2 values.
Please solve A only. Subject: Geotechnical engi A sample coarse grained soil is 50mm. In diameter and 150mm long was tested in a constant-head apparatus. The soil sample was prepared at a void ratio of 1.5. The total head was kept constant at 300mm and the amount of water is collected in 4 sec. was 50cm^3. The test temperature was 22°Ca.) Compute the temperature correction factor.b.) Compute the corrected coefficient of permeability in cm/sec. c.) Compute the interstitial velocity.
Subject Geotechnical engineering : soil mechanics A layer soil shown has the following data H1= 3m. K1= 2x10^-2 cm/sec H2= 4m K2= 3.2x10^-2 cm/sec H3= 6m K3= 4.1 x 10^ -2 cm/sec Compute the equivalent coefficient of permeability in vertical direction. Compute the velocity if h= 4m
A constant head permeability test is performed on soil that is 2 cm x 2 cm square, and 2.5cm long. The head difference applied during the test is 20 cm and 7 cm3 is collected over a time of 100 sec. Provide step by step solution. a) Compute the permeability based on these test conditions and results. b) A falling head test is conducted on the same soil specimen at the same time (t1 – t2 = 100 sec), and the standpipe diameter is 0.8 cm. If the average head during the test should be 18 cm, what are h1 and h2 values, provide step by step solution solving h1 and h2 values.
a. A constant head permeability test was performed on a 30 cm2 (cross sectional area) soil sample. The length of the samples was 10 cm, and a 15 cm head difference was applied during testing. If 20 cm3 of water was collected over 2 minutes, calculate the coefficient of permeability of the soil. b. In a falling head permeability test, the head fell from 62 to 35 cm in 4 minutes. The cross sectional area of the sample is 50 cm2 and the length was 9 cm. If the area of the stand pipe was 0.6 cm2 compute the coefficient of permeability of the soil.