Complete Combustion of methane with theoretical air (or 100% air) methane, C H, is to be burned with 100% air for complete combustion. The products of combustion or flue gas is at 105 kPa and 950°C Find (a) write the balanced mol equation (b) mass of theoretical air (c) mass of fuel (d) theoretical air-fuel ratio (e) volumetric analysis and molar analysis of wet flue gas (f) mass and volume of wet flue gas (g) gravimetric analysis of wet flue gas (h) dew point of wet flue gas (i) volumetric analysis and molar analysis of dry flue gas (j) mass and volume of dry flue gas (k) gravimetric analysis of dry flue gas

Complete Combustion of methane with theoretical air (or 100% air) methane, C H, is to be burned with 100% air for complete combustion. The products of combustion or flue gas is at 105 kPa and 950°C Find (a) write the balanced mol equation (b) mass of theoretical air (c) mass of fuel (d) theoretical air-fuel ratio (e) volumetric analysis and molar analysis of wet flue gas (f) mass and volume of wet flue gas (g) gravimetric analysis of wet flue gas (h) dew point of wet flue gas (i) volumetric analysis and molar analysis of dry flue gas (j) mass and volume of dry flue gas (k) gravimetric analysis of dry flue gas

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter32: Oil Heat

Section: Chapter Questions

Problem 12RQ: When incomplete combustion occurs, what additional by-products of combustion are created?

See similar textbooks

Similar questions

A sample of coal was found to have the following percentage composition C=75 %, H2 = 5.2 %, O2 = 12.8 %, N2 = 1.2 % and the rest ash. Calculate the amount of air needed for the complete combustion if 1 kg of the coal is burnt with 30 % excess air.
When all the products of hydrocarbon fuel ethane (C2H6) are in gaseous phase, the enthalpy of combustion at 25 oC is (- 47484 kJ/kg), find:- a) the internal energy of combustion at 25 oC b) the enthalpy of combustion at 540 oC c) calculate the heat transferred when 0.2 kg of ethane is burned at constant pressure in a cylinder containing 4 kg of air and the temperature of reactants and products being 40 oC and 540 oC respectively.
Determine the enthalphy of combustion of methane at 25 deg Centigrade and 1 atm, using enthalphy - of - formation data from Table A - 26. Assume the water in the products is in liquid form.
A gaseous fuel with 80% butane, 15% nitrogen and 5% oxygen (on a mole basis) is burned to completion with 120 percent theoretical air that enters the combustion chamber at 30°C and 100 kPa. Determine the volume flow rate of air required to burn fuel at a rate of 2 kg/min.
A fuel mixture of 60 percent by mass methane (CH4) and 40 percent by mass ethanol (C2H6O), is burned completely with theoretical air. If the total flow rate of the fuel is 10 kg/s, determine the required flow rate of air.
Liquid propane (C 3 H 8 ) enters a combustion chamber at 25 °C at a rate of 0.05 kg/min where it is mixed and burned with theoretical air that enters the combustion chamber at 7 °C. an analysis of combustion gases reveals that all the hydrogen in the fuel burns to H 2 O but only but only 90% of carbon burn to CO 2 with the remaining 10% forming Co if the exit temperature of combustion gases is 1500 K (a) the mass flow rate of air and (b) the rate of heat transfer from the combustion chamber
How do you account for the existence of both complete and incomplete combustion? Explain.
Propane is burned with dry air. A volumetric analysis of the products of combustionreveals the following volume percent composition on a dry basis, 8% CO2, 0.5% CO,7% O2, and 84% N2. Determine the percent of theoretical air used in the combustionprocess.
One mole of C3H8, is burned with an unknown amount of air during a combustion process. An analysis of the combustion products shows that the combustion is complete and there 3 moles of free O2, in the products. Determine; - a. the actual air-fuel ration b. the equivalence ratio c. the percentage of theoretical air used during this process.
Liquid propane (C3H8) enters a combustion chamber at 25°C at a rate of 0.05 kg/min where it is mixed and burned with 50 percent excess air that enters the combustion chamber at 7°C. An analysis of the combustion gases reveals that all the hydrogen in the fuel burns to H2O but only 90 percent of the carbon burns to CO2, with the remaining 10 percent forming CO. If the exit temperature of the combustion gases is 1500 K, determine 1-The balanced chemical equation for the actual process 2-Air- Fuel ratio 3-The mass flow rate of air
The reactant side has the following volumetric analysis for fuels burned simultaneously: CH₄= 68% and C₂H6= 32%. Assume a complete combustion with 15% excess air at 101.325 kPa, what is the partial pressure of water vapor in kPa.
Determine the enthalpy of combustion (in kJ) when fully-consuming a 23-L tank of ethane. The ethane inside the tank is pressurized to 8 atm at 30 ⁰C.