- 1.87%; C4H10, 1.6%, N2, 10.5%. The gas is burned with dry air, giving products having a molar analysis on a dry basis CO2,7.8%; CO, 0.2%; O2,7%; N2, 85%. (a) Determine the air fuel ratio on a molar basis. (b) Assuming ideal gas behavior for the fuel mixture, determine the amount of products in kmol that would be formed from 100 m of fuel mixture at 300 K and 100 kPa. (c) Determine the percent of theoretical air. A natural gas has the following molar analysis. 3

- 1.87%; C4H10, 1.6%, N2, 10.5%. The gas is burned with dry air, giving products having a molar analysis on a dry basis CO2,7.8%; CO, 0.2%; O2,7%; N2, 85%. (a) Determine the air fuel ratio on a molar basis. (b) Assuming ideal gas behavior for the fuel mixture, determine the amount of products in kmol that would be formed from 100 m of fuel mixture at 300 K and 100 kPa. (c) Determine the percent of theoretical air. A natural gas has the following molar analysis. 3

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

* The molar analysis of producer gas is N; 50.9%, CO 27.0%, [Example| H; 14.0%, CO, 4.5%, CH,4 3.0%, and O, 0.6%. Determine the stoichiometric air fuel ratio of producer gas. ((A/F)y = 1.443)
Given the ultimate/gravimetric analysis of coal as follows: C=81.95%, H2 = 4.63%, S=0.96%, N2=1.3%, O2=5.75%, Ash=6.09%, Moisture = 3.05% Using ash and moisture free analysis. Determine the; theoretical oxygen fuel ratio:
A sample of coal was found to have the following percentage composition C=75 %, H2 = 5.2 %, O2 = 12.8 %, N2 = 1.2 % and the rest ash. Calculate the amount of air needed for the complete combustion if 1 kg of the coal is burnt with 30 % excess air.
Analysis of products of a combustion on a dry basis, when C8H18 was burned with atmospheric air, is as follows:CO2 = 12% CO = 0.75% O2 = 3.01% N2 = 84.24%Compute the percentage theoretical air.
Problem Statement: 1 kg/s Propane (C3H8) is burned with 35 kg/s air (O2 + 3.76N2). As 80% of Carbon (CO2) and 20% CO Q: Write a balanced reaction equation based on 1 mol fuel
A gaseous fuel has the following percentage of composition by volume:N2: 10% ; H2: 50%CH4: 25% ; O2: 3.5%CO: 9% ; CO2: 2.5%(a) Estimate the minimum volume of air required for complete combustion of 1.0 m3of the gas.(b) If 60% excess air is supplied, give the volumes of each of the dry constituents ofthe flue gas. Air contains 21 % by volume of oxygen. Solve this problem in Tabulated Form.
The heating value of the a dry fuel is 18 MJ/kg. a) Calculate the effective heating value of a fuel with 40% moisture and no flue gas condensation. b) Calculate the heating value of a fuel with 40% moisture and flue gas condensation Evaporation enthalpy H=2257 kJ/kg. Cp=4,2 ( kJ/kg,K) The heating value of a moist fuel is given by this formula: H=H0*(1-f)-f*2,6 (MJ/kg), H0=heating value of dry fuel, f=fraction of water.
The reactant side has the following volumetric analysis for fuels burned simultaneously: CH₄= 68% and C₂H6= 32%. Assume a complete combustion with 15% excess air at 101.325 kPa, what is the partial pressure of water vapor in kPa.
Liquid propane (C 3 H 8 ) enters a combustion chamber at 25 °C at a rate of 0.05 kg/min where it is mixed and burned with theoretical air that enters the combustion chamber at 7 °C. an analysis of combustion gases reveals that all the hydrogen in the fuel burns to H 2 O but only but only 90% of carbon burn to CO 2 with the remaining 10% forming Co if the exit temperature of combustion gases is 1500 K (a) the mass flow rate of air and (b) the rate of heat transfer from the combustion chamber
Given the ultimate/gravimetric analysis of coal as follows: C=81.95%, H2 = 4.63%, S=0.96%, N2=1.3%, O2=5.75%, Ash=6.09%, Moisture = 3.05% Using ash and moisture free analysis. Determine the; HIGHER HEATING VALUE (HHV) I will give a thumbs up, please help me
INTERNAL COMBUSTION. Indicate the source of the Tables of Properties used in your calculation, Assume Ahi = 29,711kJ/kmol for propane gas.
Write the general energy balance for any combustion process. Is my answer correct?