Compute the internal diameter of the 10 m length hollow cast iron column. If the external diameter is two times the internal diameter and the safe compressive load on a hollow cast iron column with one end rigidly fixed and other end hinged is 60 kN. Use Euler’s formula with a factor of safety of 3 and E = 90 kN/mm2

Compute the internal diameter of the 10 m length hollow cast iron column. If the external diameter is two times the internal diameter and the safe compressive load on a hollow cast iron column with one end rigidly fixed and other end hinged is 60 kN. Use Euler’s formula with a factor of safety of 3 and E = 90 kN/mm2

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter11: Columns

Section: Chapter Questions

Problem 11.9.23P

See similar textbooks

Similar questions

Determine the allowable axial load Pallowfor a steel pipe column that is fixed at the base and free at the top (see figure) for each of the following lengths: L = 6 ft, 9 ft, 12 ft, and 15 ft. The column has an outside diameter d = 6.625 in. and wall thickness t = 0.280 in, (Assume E = 29,000 ksi and y= 36 ksi.)
A fixed-end column with circular cross section is acted on by compressive axial load P. The IS-ft-long-column has an outer diameter of 5 in., a thickness of 0.5 in., and is made of aluminum with a modulus of elasticity of 10,000 ksi. Find the buckling load of the column.
A rigid bar of length L is supported by a linear elastic rotational spring with rotational stiffness ßRat A. Determine the critical load Pcr for the structure.
Determine the maximum permissible length Lmaxfor a steel pipe column that is fixed at the base and free at the top and must support an axial load P = 500 kN (see figure). The column has an outside diameter d = 200 mm, wall thickness; = 10 mm, E = 200 GPa, and y = 250 MPa.
An idealized column consists of rigid bar ABCD with a roller support at B and a roller and spring support at D. The spring constant at D. is ß = 750 N/m. Find the critical load Pcrof the column.
A W8 × 28 steel wide-flange column with pinned ends carries an axial load P. What is the maximum permissible length of the column if (a) P = 50 kips, and (b) P = 100 kips? (Assume E = 29,000 ksi and y = 36 ksi.)
A 10-ft rigid bar AB is supported with a vertical translational spring at A and a pin at B. The bar is subjected to a linearly varying distributed load with maximum intensity q0. Calculate the vertical deform at ion of the spring if the spring constant is 4 kips/in.
A steel column is of length 8m and diameter 600 mm with both ends hinged.Determine the crippling load by Euler’s formula. Take 5 E = 2.1x10 N/mm2
Q#3. An aluminium strut 16 ft long has a rectangular cross section 2 in by 3.5 in. A bolt through each end secure the strut in such a way that is acts as hinged column about an axis perpendicular to 3.5 in dimension; and as fixed column about an axis perpendicular to 2 in dimension. Determine the safe central load with a factor of safety of 2 and E= 10300000 psi. Also discuss in detail about the governing column capacity and reasons behind it.
The ultimate stress for a hollow steel column which carries an axial load of 1.9MN is 480N/mm if the external diameter of the column is 200mm determine the internal diameter. Take the factor of safety as 4
A mechanism used in printing machinery consists of a helical spring which is having a wire diameter of 5mm and an outside diameter of 54mm. The spring has 16 active coils. If the permissible shear stress of the spring material is 335 N/mm2 and the Modulus of rigidity is 82 kN/mm2. a) Calculate the axial load in N and the deflection of the spring in mm, neglecting the effect of curvature. b) Calculate the value of axial load in N considering the effect of curvature.
Please give right answer. A mid steel column 5 m long ad 50 mm dia.Which is fixed at end and free at the other end. Determine the Euler's crippling load. Take E = 2 * 10 ^ 5 * N / m * m ^ 2